Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.2 Craccepted-aoc | accepted-aoc |
Tender Value
₹4.2 Cr
EMD Value
₹6.3 L
Closing Date
14 Aug 2026, 10:30 pmClosed
Public Works Department
EXECUTIVE ENGINEER
CONSTRUCTION OF BRIDGE TO DAMBEL CROSS-STREAM OF GURUPURA RIVER ON DAMBEL TO BANGRAKULUR ROAD IN MANGALURU TALUK
PWD/2026-27/BG/WORK_INDENT37401
PWD/2026-27/BG/WORK_INDENT37401
Open
Bridges
Two Tender Document System(Two Cover)
PWD Division Office Mangaluru
6 documents required · 6 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of works for which tenders already submitted
Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) (b) satisfactorily completed(at least 90% of contract value), as prime contractor, at least one similar Bridge Construction work of value not less than Rs. 211.25 LAKHS (usually not less than 50% estimated value of contract)
Section 2 ITT 3.2c To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) c) executed in any one year, the following minimum quantities of work Note Specify the principal items of works to be executed under this contract 1. Earthwork /Embankment- 8160.00 m3, 2. PCC/RCC/RMC - 1508.00 m3, 3.Steel-124.00 Tonne,
Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.0.00 Lakhs. (usually not less than 50% of the electrical works) in any one year.
Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender:(B) Works for which Tenders already submitted.
KPWD Class II and above Registration Certificate
Section 2:ITT 3.3-Each Tenderer should demonstrate b. Machineries could be on Lease/Hire/Ownership 1) Mechanical Concrete mixer-1 No, 2) Transit Mixer- 2Nos, 3) Excavator- 1No, 4) Tipper- 2Nos & 5)Water Tanker-1No
Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender:(A) Existing commitments and on-going works.
Section 2 ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value amounting of Rs. 422.50 LAKHS. The available tender capacity will be calculated as under Assessed available tender capacity - (AxNx1.5 - B) where A - Maximum value of civil engineering works executed in any one year during the last five years (updated to FY 2026-27price level) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value, at FY 2026-27 price level, of existing commitments and on-going works to be completed during the next 11 Months (period of completion of the works for which Tenders are invited) Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Section 2 ITT 3.3 -Each Tenderer should further demonstrate a) Machineries could be on Ownership 1) Batching Plant- 1No, 2) Tipper - 2Nos, 3)Vibratory Roller- 1 No, 4) Excavator- 1 No 5) Mechanical Concrete Mixer-1 No & 6) Water Tanker-1No
Section 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) (a) achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering works only) of Rs 845.00 LAKHS (usually not less than two times the estimated annual payments under this contract).
Section 2 ITT 3.3 - Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of no less than Rs. 126.75 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.
The Contrctors has to quote the same rate to the same items of work that is to be executed at different chainage, if in case, the contractors quotes different rates for the same item appearing at different places of BOQ then,the lowest quoted rate for the same items will be considered for that particular item for evaluation and payment.
₹5,000
₹6.3 L
14 Aug 2026
30 Jul 2026
17 Aug 2026
13 Aug 2026
10 Aug 2026
CONSTRUCTION OF BRIDGE TO DAMBEL CROSS-STREAM OF GURUPURA RIVER ON DAMBEL TO BANGRAKULUR ROAD IN MANGALURU TALUK
Bridge Maintenance & Testing - Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and eff...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Acrylic anti-carbonation coating for New Concrete - Providing and Applying Acrylic anti-carbonation coating on concrete surface, which is single component, cold applied, water based acrylic poly...
Providing Fusion Bonded Epoxy Coating (FBEC) to TMT Bars as per IS:13620-1993 specifications for a thickness of 175micron & permissible variation of 50micron includin...
Providing Fusion Bonded Epoxy Coating (FBEC) to TMT Bars as per IS:13620-1993 specifications for a thickness of 175micron & permissible variation of 50micron includin...
Providing Fusion Bonded Epoxy Coating (FBEC) to TMT Bars as per IS:13620-1993 specifications for a thickness of 175micron & permissible variation of 50micron includin...
Providing Fusion Bonded Epoxy Coating (FBEC) to TMT Bars as per IS:13620-1993 specifications for a thickness of 175micron & permissible variation of 50micron includin...
Providing Fusion Bonded Epoxy Coating (FBEC) to TMT Bars as per IS:13620-1993 specifications for a thickness of 175micron & permissible variation of 50micron includin...
Providing Fusion Bonded Epoxy Coating (FBEC) to TMT Bars as per IS:13620-1993 specifications for a thickness of 175micron & permissible variation of 50micron includin...
Providing Fusion Bonded Epoxy Coating (FBEC) to TMT Bars as per IS:13620-1993 specifications for a thickness of 175micron & permissible variation of 50micron includin...
Crash Barrier for Bridges - Provision of an Reinforced cement concrete crash barrier at the bridge deck & approaches to bridge structure, constructed withReinforced cement concrete with ...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- Including c...
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- Including cost and conveyance of all materials, labour, hire char...
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- Including cost and conveyance of all materials, labour, hire charges of machin...
Filler joint - Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification. Ref to MoRT&H : IRC - 2605 ...
Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...
Painting with synthetic enamel paint bridge No. and span arragements. - Painting two coats after fillng the surface with synthetic enamel pant bridge No and span arrangements as per as...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...
Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...
Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of spec...
Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...
Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion ...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...
Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...
Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...
Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...
Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Providing and erecting a W metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Ready Mix Concrete (RMC) with Cement & Cementitious Materials.
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...
Ready Mix Concrete (RMC) with Cement & Cementitious Materials.
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...
Ready Mix Concrete (RMC) with Cement & Cementitious Materials.
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...
Ready Mix Concrete (RMC) with Cement & Cementitious Materials.
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...
Ready Mix Concrete (RMC) with Cement & Cementitious Materials.
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...
Providing and Laying Reinforced Cement Concrete Pipe
NP3 as per design in Single Row
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material i...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
37401 Bid document KW-4.docx
Tender Document • 1.32 MB
BAR CHART-DAMBEL.pdf
Others - Implementation Chart • 0.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .