Construction of Govt. Veterinary Hospital at village Nimoth in Rewari Distirct.(CM. Announcement code 10869 dated 20.11.2015) (at risk and Cost)(Re-Invited)

Amount

Civil Work Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres.(HSR 6.6)

Earth filling under floors with surplus soil, excavated from foundation and taken only from oustside the building plinth, in 15 cm layers includings ramming watering and consolidating lead up to 30 metres (HSR 6.13(a)

Cement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth (HSR 10.28)

Cement Concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth. (HSR 10.39)

Precast cement concrete 1:2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey. (HSR 10.77)

Cement concrete 1 : 1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement , but including centering and shuttering, laid in position, complete in all respect ( HSR 10.81 + 10.95 a) First storey

Cement concrete 1 : 1½ : 3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects. (HSR 10.82 + 10.95) b) Second storey

Cement concrete 1 : 1½ : 3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams,girders, stairs, columns, (square or rectangular) battens and lintels etc excluding steel rainforcement but including centring and shuttering, laid in position, complete in all respects.(HSR 10.86 + 10.95(a)) First storey

Second storey

Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by item Nos. 10.82,10.86 to 10.88 of HSR 1988 not exceeding 10 cm thickness excluding steel reinforcement but including centring & shuttering, laid in position,complete in all respects (HSR 10.89 + 10.95(a)) First storey

Second storey

Cement concrete 1:1½:3 with stone aggregate 20mm nominal size for reinforced concrete work in footing, strips, foundation s, beams rafts, pedestals and approach slabs of bridges etc, excluding steel reinforcement but including centering and shuttering, laid inposition complete in all respect (for work upto 1.5 meters below ground level) (HSR 10.90+10.95) a

Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size in payments, roads, taxitracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete.(HSR 10.132 + 10.95 (a))

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with two coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded. (HSR 10.114 )

Damp proof course 25 mm thick of cement concrete 1:2:4 using stone aggregate without two coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded. (HSR 10.115 - Note )

First class brick work laid in cement sand mortar 1 : 4 in foundation and plinth (HSR 11.4)

First class brick work laid in cement sand mortar 1 :6 in first storey upto 4 metres above plinth level (HSR 11.7) c) Third storey

11.43 cm thick brick wall with every fourth course, reinforced with hoop-iron, laid in 1:4 cement sand mortar in super-structure. (HSR 11.46) First storey

Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm on top of RCC the slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13). First storey

Second storey

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR 13.50)

Supplying and fixing in position G.I. pipe class ‘B’ spouts in chajjas and cantilevers (HSR 13.55 e) 50 mm i/d G.I. Pipe

Bottom Khurra on ground 1.2 m x 0.6 m consisting of brick-on-edge laid in cement mortar 1:3 over 75 mm cement concrete 1:8:16 including 12 mm thick cement plaster 1:3 (HSR 13.57)

Cement Concrete 1:2:4 gola 10cmx10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified (HSR 13.64) First Storey

Second storey

Providing and fixing PVC rain water pipe 6 Kg. Pressure of ISI mark in cement mortar during masonry work. A) 100 mm dia PVC pipe 6 Kg. pressure make Supreme, phinolex, Prince (HSR 13.89 a)

Providing & fixing PVC bend ISI mark. a) 100mm dia PVC Bend. Make Supreme, Finolex, Prince. (HSR. 13.90 a)

Base course of floors consisting of 100mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Conglomerate floor 50 mm thick cement concrete topping 1:2:4 (HSR 14.10)

Precast terrazzo tiles of 20 mm minimum thickness in cement as specified below with marble chips of size and colour as required laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry, between joints and over the base in floors, treads of steps and ladings including rubbing and polishing. (HSR 14.44) c) in white cement. First floor

Precast terrazzo tiles of 12.5 mm minimum thickness in cement as specified below with marble chips of size and colour as required laid on 10 mm thick cement coarse sand plaster 1:3 and jointed with neat cement slurry in skirting, dado and risers of steps, including rubbing and polishing complete. (HSR 14.47) c) in white cement. NTC or equilent. First floor

Fixing Marble stone flooring 17mm and above thick slab including matching grains of marble laid in any pattern as specified over base of 12 mm thick cement coarse sand morar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing including labour for fixing cramps, pins and dowels etc. (Excluding the cost of Marble) (HSR 14.49) (c) (i) First floor

Fixing Marble stone 17mm and above thick in risers of step, skirting,dado, pillars and wall lining including matching the grains of marble slab in any pattern as specified laid on 12 mm thick cement coarsed sand mortar 1:3 and jointed with white cement slurry mixed including rubbing and polishing, including labour for fixing cramps, pins and dowels etc.(Excluding the cost of Marble) (HSR 14.52) (c) (i) First floor

Extra for nosing in treads of steps of Kotah stone slab (HSR 14.65)

Kotah stone 20mm thick in skirting risers of steps, dado, pillers and wall facing (lining) in any patterns as specified 12mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc., (HSR 14.66) First floor

Providing and fixing ceramic-tiles / anti-skid tiles of size 400x400mm or above size of approved make in floors laid in any pattern over base of 20 mm thick Cement Sand Mortar 1:3 and jointed with white cement slury mixed with pigment to match the shade of tiles. (HSR 14.91) Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK. First floor

Providing and fixing 1st quality ceramic-glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer -In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.(a) Size of ceramic Giazed tiles 200mm x 300mm. (HSR 14.92 a) First floor

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR. 15.12) First Storey

External Plaster First Storey

Second Storey

Striking joints in lime or cement on brick and tile walls (HSR 15.69 (a))

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quantity filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (HSR 16.9)

Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on new steel or iron work (HSR 16.17)

White Washing three Coats (HSR 16.48)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (HSR 16.58)

Providing two coats of exterior acrylic emulsion paint. (HSR 16.79) (b) 2nd Quality

Ist Quality

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (J.K./ Birla). (HSR 16.81)

Providing and fixing 12 mm thick and 150 mm wide pelmet of commercial ply wood with 25 mm dia teak wood curtain rod and brackets, including fixing with 25 mm x 3 mm M.S.flat,10 cm long and plugs (Teak),etc., complete (HSR 17.63)

Providing and fixing wooden handrail of required shape and design, with necessary screws, including labour, for rounding, vertical and horizontal bends and curves complete fixed in position. (HSR 17.69 b)commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., (Nonconiferous timber other than teak, conforming to I.S.specification no.1003,kiln seasoned)

Providing and fixing, 150 mm hasps and staples with necessary screws, etc., complete (HSR 17.78 b)

Providing and fixing helical door spring 150mm (superior quality) including necessary screws ,etc., complete ( b ) iron (HSR 17.79 (b)

Supplying and fixing hydraulic door closer, I.S.I.mark, with necessary screws, etc., complete. (HSR 17.82 b)

Providing and fixing 0.50 mm thick aluminium sheet, including cost of necessary screws, etc., complete (HSR 17.87)

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1669 bonded with water, proof type phenol formaloehyde synthetic resin, hot-press as , conforming to I.S. 2202 part-I and II fixed in position including iron hinges screws chocks/cleats and stops, etc. (Excluding the cost of any fittings other than specified above, but including labour for fixing the same in position):- (HSR 17.93 a iii - Note) Commercial veneering with vertical grains or cross bands and face vaneer on both sides comercial facing with laminated core and lipped edges. (a) (iii) 35 mm thick

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

Fe-500 EQR TMT steel bars for R.C.C works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete (HSR 18.22)

Supplying and fixing glass panes including special metal sash puttty of approved make (b) glass panes 4 mm thick, exceeding 40sq dm areas. (HSR 18.30(b))

Pressed steel sheet frames (chowkats ), consisting of 2mm thick steel sheet of the specified section,including iron lugs(hold fasts) iron hinges conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame, and cement concrete 1:3:6 for lugs complete. (HSR 18.34) d) Door and Window frame of size 114 mm x 50 mm with 40 mm wide single rebate

Fencing 1.20 metres high fencing, with 1.65 metre posts, placed at every, 2.5 meters to 3 metres apart embedded in cement concrete blocks, and every tenth post, to be strutted, provided with 4 horizontal lines of G.I. barbed wire, weighing 9.34 kg. per 100 metres (minimum) and fixed with G.I. staples, tied to 6 mm bar nib, with binding wire or by providing cut, including drilling holes, in the post of complete (excluding the cost of posts, struts, earth work and concrete which is payable extra). (HSR 24.36)

P.H. Work Excavation for pipelines running under pressure in trenches and pits in open area where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc. refilling consolidation and watering of refill, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fencing etc. outside the town in ordinary soil (HSR 6.8 (a) With timbering and shoring upto

Labour for laying, jointing, fixing and testing G.I/P.V.C/W.I. pipe lines and specials tees bends, sockets, elbows etc. inside building and testing etc. complete including cutting threading (HSR 28.18) 15mm

Extra for fixing & jointing union couplings in G I on W I pipe line (HSR 28.21) 15mm

Drilling and tapping cast iron pipe line of all diameters and screwing in ferrule and connections. (HSR 28.22) 40 mm i/d

Cutting holes upto 23 cm square through brick work in mud walls for pipes and making good including repointing replastering and finishing according to existing finish where required. (HSR 28.23) 11.43 cm thickness of walls

22.86 cm thickness of walls

Labour for fixing G.I or W.I pipe sleeve pieces in holes in walls, floors, and roofs rounds pipes including all cutting and wastage. (HSR 28.27) 15mm internal diameter of sleeve pipe

20mm internal diameter of sleeve pipe

25mm internal diameter of sleeve pipe

Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I pipelines laid in the ground or inside building including cartage from divisional stores or nearest railway station to site of works. (HSR 28.29) 15mm internal diameter

20mm internal diameter

25mm internal diameter

Bailing out water from the trenches for making new connections in fully charged pipe lines including cleaning, trimming and dressing the trenches to correct alingment and grade as required by the Engineer-in-charge. (HSR 28.47) (a) upto 200mm i/d

Construction brick masonray inspection chamber sizes as given below upto 0.60 metres average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plastern 1:2 with a floating coat of 1 mm thick of neat cement RCC 1:2:4 slab 100mm thick/C.C. topping 50mm thick with 455 mm x 455 mm / 455 mm x 610mm inside light duty C.I inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. c) Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with RCC slab) (HSR 29.84)

Providing and laying SW pipe grade –A in standard length of 600 mm each pipe marked with IS :651 and their lowering, cutting , jointing & testing as described in HSR item No. 29.38 to 29.40 including the cost of jointing material as well as carriage, loading, unloading , stacking., handling, rehandling etc. complete in all respect to the satisfaction to the Engineer-in-Charge (HSR 29.95 (ii) 150 mm i/d

Providing and fixing in position best Indian make European type water closet suite with concealed 'P or 'S trap with or without vent (as approved by the Engineer-in-charge) and all other necessary fittings as fully described in item no. 30.3 above (HSR 30.6 a (i)) white

Extra over item Nos. 30.1 to 30.4 and 30.6 for providing and fixing 15 litres capaciety low level vitreous china ware cistern complete with flush bend all other necessary fittings instead of C.I. High level cistern complete with fittings. (HSR 30.12 (i)) White

Extra over item Nos. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid. (HSR 30.13 (i)) White plastic seat (Solid)

EXTRA FOR providing and fixing 32 MM dia. G.I./C.P.FLUSH PIPE complete with accessories instead of 32/MM dia. galvanised telescopic flush pipe with clips (as required by the Engineer-in-charge). (HSR 30.15) (a) 32 mm dia. G.I. flush pipe

Providing and fixing in position best Indian make lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fittings as fully described in item no 30.41 above (HSR 30.42) II) 530mmx450mm with one no. tap

II) 630mmx550mm with one no. tap

Providing and fixing in position 32mm dia G.I. Waste pipe embedded in wall or lead waste pipe (weighing 3.47kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge)(HSR 30.48) 32 mm dia G.I. waste pipe an embwdded in wall or lead waste pipe (3.474 Kg)

Providing & fixing in position best indian make shower with 15 or 20 I/d in-let (HSR 30.66 c) CP Brass with revolving joint

Providing and fixing in position best indian make towel rails fixed in with rawlslugs embedded in walls with C.P Brass screws, complete in all respect including cutting and making goods the walls etc. (HSR 30.68) a) 25mm dia C.P brass adjustable. ii) 600mm long.

Providing and fixing in position glass shelf fixed in with rawal plugs with C.P. brass screws complete including cutting and making goods the walls etc. (HSR 30.69 © (i)) Vitreous chinaware shelf 560mm long White

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 Nos. chromium plated brass screws and washers complete including cutting and making good the walls etc. (HSR 30.71) (i) Indian make 600 x 450mm

Providing and fixing in position 15mm i/d C.P.bras bib cocks of best quality (as required by the Engineer-in-charge). (HSR 30.75) (a) bib cock long body

© Bib cock

Providing and fixing in position C.P.brass stop cock (as approved by the Engineer-in-charge) (HSR 30.76) (a) 15mm stop cock (i) Stop cock male and female end

(ii) Concealed stop cock with flange

Providing and fixing in position best Indian make flexible tube connection (HSR 30.82 b (i)) C.P. Brass 15 mm x 300 mm

Providing and fixing in position H.C.I soil waste vent or antisyphonage pipes to I.S.I specification of E.L.C manufacture or of any other reputed firm including cutting and wastage etc. and cutting holes in walls, roofs or floor etc. and making good to its original condition but excluding cost of lead jointing (HSR 30.84) (a) 100 mm internal diameter

(b) 75 mm internal diameter

Providing led caulked joints to H.C.I pipes and specials conforming to I.S.I specification of ElL.C manufacture or any other reputed firm including cost of lead yarn, fuel and tools etc. (HSR 30.87) (a) 100 mm internal diameter (1.13 Kg.)

(b) 75 mm internal diameter (0.91 Kg.)

Providing and fixing position M.S. or Heavy flat iron clamps made out of M.S. flat not less than 5 mm of the approved design for fixing C.I. soilt waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floors etc., and painting (HSR 30.88) (a) For 100 mm internal diameter pipes

(b) For 75 mm internal diameter pipes

Providing and fixing position H.C.I. floor traps ISI marked of the self cleaning design with C.P. brass higed grating with frame with or without vent arm and including cement concrete 1:2:4 under andaround the floor trap where required upto floor level complete in all respect including cutting and making good the walls and floors etc. minimum depth of water should be 150 mm with a minimum seal of 50 mm (HSR 30.89) (a) with 75 mm i/d outlet

Providing and fixing inposition HCI 50 mm internal diameter outlet plain nahani trap ISI marked of the self cleaning design with C.P brass hinged grating with frame weighing 6.80 kg each fixed complete as fully described in item no 30.89 above (HSR 30.90 (b) With 75mm I/d outlet plain Nahani trap

Providing and fixing in position H.C.I. special for soil, waste, vent or anti-syphonage pipes to I.S.I marked including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condidition but excluding cost of lead jointing (HSR 30.91) (a) 100mm i/d pipes (i) Heal rest bend

xiii) Bend with door

xxii) Collars

xxiv) WC connection 300mm long

b) xii) 75mm Bend with door

xiv) Bend Plain

xviii) Collars

Providing and fixing position gully traps fixed in cement concrete 1:4:8 complete with H.C.I. grating 150mm x 150mm cast iron cover weighing approximately 7.26 Kg. and frame clear opening 300 mm x 300 mm and outside size 330 mm x 330 mm and chamber including cost of all brick work in cement mortar 1:5 cement concrete 1:8:16 in foundations and cement concrete 1:2:4 in coping around C.I. cover and frame etc. with three coats of black bitumastic superior PAINT of approved manufacture on all C.I. workas per standard design minimum depth of water should be 150mm with a minimum seal 50mm. (HSR 30.114) (a) 100 mm internal diameter S.W. gully trap

Providing and fixing HDPE water storage tanks of Sintex, Diplast, O.K. make with covers / lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with sutiable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in-Charge. (except civil work). (HSR 30.119) 1000 Ltr. capacity.

NS Items Earth Work non plastic in embankment including excavation of earth in all kinds of soil with all lead and lift including loading, watering and compaction, compensation of earth etc., complete in all respect CBR minimum 6% sandy soil. (N.S.)

Supply of G.I. (Medium class "B" type of Jindal & Tata make) (NS) (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

Supply of G.I.Union shall be of Make:- UNIK, TATA, ZOLOTO. (NS) (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

Supply Gun Peet Value shall be of Make:- UNIK, TATA, ZOLOTO. (NS) (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

E.I. Works: Main Switches (HSR 31.12 (a). Supply and erection of metal clad switches/BDBs with rag bolts on wall or on existing angle iron board/pedestal including bonding to earth and necessary connections. xiv) Triple pole switch with neutral link 32 amp. 415 volts Cat-B

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide (HSR 31.13) ii) Size 40mm x 40mm x 6mm

M.S. Sheet (HSR 31.14) i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distribution board with plug and socket. Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (HSR 31.15) ii) S.P.N. enclosure for single pole MCB 20 amp.

Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection. Miniature circuit breakers of 9 KA breaking capacity. [HSR 31.17] ii) SP MCB 6 to 32 amp.

SUPPLY AND ERECTION OF FITTINGS AND ACCESSORIES. (HSR 31.18) vii) Call bell 220/230 Volt A.C. Bakelite with double coil

ix) Bell push flush type (without flexible wire) in existing sheet

xi) Bakielite angle/ straight button holder large size

xii) Switch 5 amp on existing sheet

xiii) Wall socket 5 amp. On existing sheet

xxiv) Erection only of 1 x 40 watts or 2 x 40 watts 1220 mm long/1 x 20 watts or 2x20 watts 610 mm long flurescent tube fittings directly on wall including necessary connections with 0.75 sqmm (24/0.20 mm0 PVC copper flexible cable for connecting the tube with the adjacent light point

xxvi) Supply and erection of hexegonal M.S. box 1.60 mm thick having each side 8 cms, 7.5 cms deep, top covered with M.S. lid by means of screws including 10mm dia 30cm long mild steel rod made into suitable suspension hook and erected in R.C.C. slab for erection of fan, the bottom covered with 3mm thick bakelite sheet with suitable holes, painting etc. complete with all labour and material required to complete the job.

ERECTION AND CARRIAGE OF FANS (HSR 31.20) i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station/Goods transport/PWD store to the site of work.

iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport/PWD store to the site of work.

v) Making suitable holl in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with deodar wood frame of section 40 mm x 25 mm thick.

vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

PIPE LAYING Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21) i) Galvanized iron pipe 20mm dia on flushed. (IX)

xxi) Heavy gauge welded conduit pipe - 20 mm dia 1.60 mm thickness flushed.

(Q) Earthing (HSR 31.22) i) Earthing with G.I. earth pipe 4.5 m long and 40mm dia with masonry enclosures on the top etc. as required.

ii) Extra for using salt and charcoal/coke for pipe earth electrode as required.

xii) Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15mm dia G.I. Pipe from earth electrode as required.

xiv) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required.

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) iv) 10 Sq. mm 2 Core Ard. Cable.

Street Light. (HSR 31.30) IV) Supply and erection of weather proof M.S. Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S. Sheet hinged cover, locking arrangements, housed in wall, including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S. Box including painting and necessary connections.

Miscellanous (HSR 31.35) iii) Supply & Erecction of caution notice plate in three languages

vii) Supply & Erection of 75 mm x 75 mm x 60 mm deep M.S box for telephone & inter-communication system including 2 pin 5 amp socket including cost of bakelite sheet

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sq. mm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe. [HSR 31.36] i) Fan Point c) Long Point

ii) Light Point a) Short Point

b) Medium Point

c) Long Point

iii) Twin Control Light point with 2 way, 5 amp. Single pole switch c) Long Point

vi) Call bell point including M.S. box of size 180 mm x 60mm deep for call bell. Long point

vii) 3 pin 5 amp plug point including earthing the 3rd pin etc. a) Short Point

c) Long Point

viii) 3 pin 15 amp plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. (viii) c) Long Point

Supply & erection of PVC unsheathed aluminium conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe (HSR 31.40) i) Size 1.5 sqm ( 3 /0.81 mm)

iii) Size 4 sqm (7 /0.85 mm)

iv) Cable size 6 sqm ( 7 /1.05 mm)

Supply & Erection of double door sheet steel enclouser distribution board suitable for MCBs & ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer in charge of the work (HSR 31.41) i) 4-way, SP&N (Horizontal)

vi) 8-way, TP&N (Horizontal) (8+24)

Supply and erection of MS saddles and clamps on wall /RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-charge of the work. (HSR 31.48)

Supply & erection of 50 mm diameter 1.5 mtr long GI bracket (B-class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 nos 50 mm x 3 mm thick MS flat including cost of cutting welding of GI bracket on wall with 2 nos. 50mm x 3mm thick MS flate including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc. including making necessary connection in all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work (HSR 31.53)

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.(HSR 31.55)

Supply and erection of 25 W LED street lighting model & make:- BRP 020 LED HP/CW 240 Volt PSU GR 25 W GLS of Philips Make /LR 02-291-XXX-57-XX of Wipro make /BCLST 25 W LED I of Bajaj make pressure die cast alluminium housing heat resistance glass IP-66 protection with Lense including all petty material with labour for errection, complete in all respect of Engineer-in-charge of the work.

Non Schedule Items Supply and erection of 22 W indoor LED Tube fitting with batten and tube, decorative ultra slim liniare LED lighting fixture with extruded with polycarborate housing/body environmental friendly, energy efficient completed including all petty material with labour for erection, complete in all respect of Engineer-in-charge of the work. (Make:- Philips/ Havells's /Crompton.)

Supply only of AC Ceiling fan without regulator of size 1200 mm (48") sweep complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Orient/ Crompton/ Havell's make.

Supply of Industrial Heavy duty Exhaust fan 15" comlplete in all respect of Orient/ Crompton/ Havell's make. Note:- In case of any difference in the unit & nomenclature of any of the HSR items depicted in the DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

Varun Sharma