ADDN/ALTN AND UPGRADATION OF 70 QTRS (JCOs AND OR) AT VIKRAM BATRA VIHAR AND 80 QTRS (JCOs AND OR) MD ACCN AT OLD CHITRA LINE UNDER GE (WEST) DELHI CANTT-10

Amount

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each.

Taking down shutter exc 1.00 sq. m but not exc 2.00 sqm each with shutters and refixed in the same opening complete all as specified and directed.

Demolition of reinforced cement concrete as in Chajja, RCC parapet, Kitchen slab, Chullah hood, chimney portion and similar work concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling existing water tanks capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed.

Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete in all respect as specified

Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete in all respect as specified

Dismantling wrought or mild steel work of any description not otherwise provide complete in all respect as specified

Demolition of cement concrete (unreinforced) / sunken floor in ground floor and paving not exc. 15cm thickness (below or above ground level) all as specified.

Dismantling of brick tiles or terraing tiles single layers as on roof. Complete all as specified and directed.

Demolition of mud in roof any thickness incl plastering and leeping etc complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 100mm complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed.

S&F rolled section as in framing for door/window/vent /CB chowkats/kitchen cabinet supporting/window grill welded frame and the like fixed with angle cleat and connecting plates including welding of butt hinges and similar work confirming to Fe - 410-0 or Fe - 310 - 0 cooler stand shall be fitted upto 2 storey height complete all as specified and directed.complete all specified and directed.

M&L for powder coated aluminium ventilator, openable, top hung and bottom portion fixed type without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and top hung shutter fixed hook & eye minimum one no on each shutter, one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately against respective items.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium sliding three track window, three shutter Series B (SHUTTER SECTION-18mm) with two glazed shutters each covering one third opening and one gauged shutter covering one third opening including self closing locking arrangement, stoppers and rubber beading gasket without sash bar aluminum section weighing 1.06 Kg/RM including necessary jointing cleats glazing clips rubber packing powder coated aluminum beading screws including fittings in each shutter with 5 mm thick tinted glass & also including stainless steel wire cloth of 0.36 mm dia and avg width of aperture 1.40 mm complete all as specified and directed. Note:- Three way track sliding window of frame size 92x31.75x1.5 mm and shutter size 40x18mm with 9mm interlocking leg x 1.45mm thick and weight not less than 0.607kg/RM.

S&F powder coated (minimum thickness of powder coating 50 micron ) aluminium partly fixed and partly three track window three shutter SERIES B (SHUTTER SECTION-18mm) with two glazed shutters each covering one third opening and one gauged shutter covering one third opening including self closing locking arrangement, stoppers and rubber beading gasket without sash bar aluminum section weighing 1.06 Kg/RM including necessary jointing cleats glazing clips rubber packing powder coated aluminum beading screws including fittings in each shutter i.e. two shutter with 5 mm thick tinted glass and one with stainless steel wire cloth of 0.36 mm dia and avg width of aperture 1.40 mm and sliding section complete all as specified and directed. Note:- Three way track sliding window of frame size 92x31.75x1.5 mm and shutter size 40x18mm with 9mm interlocking leg x 1.45mm thick and weight not less than 0.607kg/RM.

S&F powder coated anodised aluminium frame for window with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F factory made plain framed panelled shutters, 35mm thick (any number of panels) with lock rails in IInd class HW and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, Kiln seasoned and chemically pressure treated all as specified and as directed by Engineer-in-Charge.

S&F flush shutter 35mm thick solid core construction with block board core and plywood face panels,comercial type on both sides complete all as specified and directed.

S&F glazed skelton shutter IInd class hard wood 35 mm thick rebated and prepared to received glass, gauge etc with sash bars edges of forming plain, chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

S&F 19/20 mm thick Medium Density Fibre board (MDF), Pre laminated exterior grade both side laminated board fixed to frame as in shutters to cup boards including 19/20 x 2mm lipping/ beading all round shutters complete all as specified and directed.

M&L 30mm thick solid core construction, with 19/20 mm thick medium density fiber board (MDF) Pre liminated exterior grade both side liminated as in cupboard shelf/partion fixed in almirah by MS frame arrangement in front side and fixed in wall by cutting chase and fixed in position by using cement mortar 1:2 complete all as specified and directed.

S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.

S&F of stainless steel handles 100 mm size for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.

S&F stainless steel fastner for kitchen cabinet as per site requirement complete all as specified and directed.

S&F 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.

M&L for Cutting holes in brick walls in cement mortar for inserting hold fast and similar works etc. and making good to dismentalled portion in CM 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in wall exc half brick but n exc one brick thick complete all as specified and as directed.

M&L for Mild Steel work as in hold fasts complete all as specificed and directed

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone Aggregate) as in bed blocks for hold fast complete all as specified and directed.

S&F 4mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqn in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed

S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to PVC doors with SS screws complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specificed and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel complete all as specificed and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F 125mm long aluminium handles cast type anodised ISI Marked

S&F 100mm long aluminium handles cast type anodised ISI Marked

S&F 150mm long aluminium handles cast type anodised ISI Marked

S&F 75mm overall length of aluminium alloy body Floor door stopper and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F hasp and staple size 75mm safety type, aluminium anodised, including bolt to hinge plate and fixed with screws all as specified.

S&F 200mm, mild steel ordinary rat tail rod pattern springs includng roller and roller plate complete incl necessary welding if required complete all as specified and directed.

S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm long Mild steel barrel tower bolt, stove enamelled black, with bright bolt. All is specified and directed.

S&F magic eye of approved / standard make and of suitable size, to be fixed at main entrance door including drilling etc as per thickness of the door complete all as specified and directed.

S&F Safety chain with hook and hinge of approved / standard make and of suitable size, to be fixed inside of main entrance door complete all as specified and directed.

S&F in repairs 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 125mm long aluminium handles cast type anodised ISI Marked

S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs butt hinges 100mm long medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F for roof/sun shade pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as kitchen slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surfaces of concerete all as specified and directed.

M&L for reinforced cement concrete Nominal Mix using type B-1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)

M&L for mild steel TMT bars upto 10mm dia and over cut to length,bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, cooking platforms and WHB plate form like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed of 20mm thick in CM (1:4) including rubbing and polishing complete all as specified and directed.

M&L for half moulding of granite stone edges with grinding and polishing complete all as specified directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in window cills, bath/toilet corner and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for sealaing of pipe penetration of toilets core cutting in the following stages:- Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty on pipe penetration surfaces. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joint to concrete including Cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc Product: Sikagard®-694 F (I), Yield: 0.6 ltr/kg. Product requirements: suitable for submerged condition; compressive strength of 40 N/mm2 (1 day) according to IS 9162-1979.

Supply and apply a glass fibre reinforced acrylic modified cementitious coating system.Prepration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementitious coating system as Top coat: SikaTop® Seal-107 @ 1.5 kg/m2 over reinforcement: Sika® Fab-1 over base coat: SikaTop® Seal-107 @ 1.5 kg/m2 etc including Supply and apply a protection plaster (12 – 15 mm) admixed with appropriate integral waterproofing compound Sika® Plastocrete Plus @0.10 kg per bag of cement. The product should conforms to IS 2645. all as specified and directed. System should have compressive strength: 20 N/mm2; bond strength: 2.0 N/mm2.

M&L for PCC 1:5:10 type E-2 (40 mm graded stone agg) as in sunken floors complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

Supply only 100mm bore cast iron 'P' Traps.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed including taking down of existing stop/angle vale complete all as specified and directed.Make: Shakti Cat part No. DL-5106, prayag cat part no. PIS-10 and cera cat part No. QTF2006201 HTF 3001201.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make: Shakti Catpart No. CN-4509, prayag cat part No. PIS-18H and cera cat part No. F1007351F4050102.

S&F 15mm bore bib taps chromium plated fancy type cast copper, screwed down, screwed for iron pipe or for brass ferrule & fixed for GI pipe including taking down of existing PVC bib tap.complete all as specified and directed. Make : Shakti cat part no. CN-4503,Prayag Catpart no. 6606 and cera catpart no QT-F2006152HT3001152

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed. Make: Prayag cat part No. BOS-90S and cera cat part No. F7010514ABF7040102

S&F stainless steel plate rack made of 0.80mm thick sheet of size 600x750x250mm fixed to wall with suitable rawl plug all as directed.

S&F sinks made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F countertop oval shape vitreous china wash hand basin of size 550X460mm/550X430mm complete all as specified and directred.

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F 32mm dia and 90 cm long PVC waste pipe complete all as specified and directed.

S&F 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified and directed. Make: shakti cat part no. CN-4515,prayag cat part no. 8275 and cera part No. F2010402

S&F 15mm dia Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified. Make: Shakti cat part no DCS-7513, prayag cat part no. 8251 and cera cat part no. F2007461

S&F 15mm dia Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified. Make: Shakti cat part No. DES-7514, prayag cat part No. 8255 and cera cat part no. F2013501

S&F 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (stop valve/angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.Make: Shakti Cat part No. DL-5106, prayag cat part no. PIS-10 and cera cat part No. QTF2006201 HTF 3001201.

S&F in repairs 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified.

S&F CP soap dish fixed to wall with brass screw complete all as specified and directed.

S&F tubular towel rails 20mm dia, D type 60cm long between flanges of brass chromium plated.

S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred.

S&F 20mm GI tank nipple suitable for HDPE water tank complete all as specified and directed.

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 15mm any grade to walls and ceiling or laying in floors Note :- Tube will be obtain from taking down

S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified. Note:- Tube will be obtain from taking down

Fixing only tubes 20mm any grade to walls and ceiling or laying in floors

S&F 28mm dia coloured PVC coated MS drapery curtain rod complete all as specified and directed.

S&F decorative finials of ABS plastic of suitable dia & in matching colour of curtain rod complete all as specified and directed.

S&F brackets of galvanized steel powder coated paint in matching colour suitable to curtain rod complete all as specified and directed.

M&L Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, Fe-290 (Gde E165) etc. complete all as specified and directed.

Surface dressing not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Hard core, broken to gauge n exc 63mm using broken stone boulders complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 40mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for Coloured Cement concrete Pre polished & reflective type chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment over and incl 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 50mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L 60mm thick coloured & reflective type cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade complete all as specified and as directed.

M&L for wire brushing and cleaning top surface of existing roof surface, including flashings and junction of parapets, etc. complete all as sepcified and directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded stone agg) cement concrete as in roof padding etc.complete all as specified and directed.

M&L for 10mm thick plastering in CM 1:4 with water proofing liquid as per manufacturer instructions when concrete is a still green etc complete alll as specified and directed. (Note:- Water proofing liquid shall be measured and separately)

M&L for applying a coat of bitumen primer confirming @0.50 ltr/ Sqm on prepared surface of plaster and applying a coat of hot blown bitumen 85/25 gde @1.2 kg/sqm and applying APP based Polymeric membrane minimum weighting 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt.not less than 150 grm/ sqm) and sealing joints by torched application complete all as specified and directed. (Note: Work be done through approved applicator only)

M&L for 20mm thick screed bed in cement mortar 1:4 with using WPC @3% by weight of cement complete all as specified and directed. (Note WPC will be measure and paid seperately).

Supply only Liquid water proofing compound, complete all as specified and directed.

M&L for plain cement concrete tiles 25cm x 25cm x 22mm thick laid on cement mortar screed bed and incl joints grouted flush and pointing with grey cement and pigment in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed. (Note: Work be done through applicator approved)

All as per item No 114 but except of brick tiles

M&L Glazed ceramic tiles 300 x 600 x7mm vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including rendering 10mm thick backing coat in CM 1:4 including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:4) laying floor finish including dismantling of existing tiles or terrazo finish /roughening surface of old concrete floor including cement mortar bedding of any thickness complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish including dismantling of existing tiles or terrazo finish /roughening surface of old concrete floor including cement mortar bedding of any thickness complete all as specified and directed.

M&L non skid ceramic coloured joint free tiles (600x100mm) x7 to 8 mm thick in skirtings 100mm high etc set and jointed in neat cement slurry and pointing in coloured cement incl 10 mm thick rendering in cement mortar (1:4) as backing coat complete all as specificed and directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10cm girth including preparation of surfaces complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of pink primer on wooden surfaces of girth exc 10 cm including preparation of surfaces. complete all as specified and directed.

M&L for pre-polished Machine cut kota stone slab 18-20 mm thick and as a single piece/ as per site requirement in tread and riser of steps, skirting, dado and pillers including moulding for nosing over cement screed bed 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including roughning the stair complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes 100mm bore sand cast in any length with or without ears, with lead joints, laid in trenches or in floors including disamntling of existing PVC/SWG pipe and jointing to GT and Manholes pipes complete all as directed. (Note: Lead joint will be measure and paid separately)

S&F Cast iron soil, waste and vent pipes 100mm bore sand cast in any length with or without ears, with lead joints, laid in vertical surfaces including disamantling of existing PVC pipes complete all as directed. (Note: Lead joint will be measure and paid separately)

S&F Cast iron soil, waste and vent pipes 75mm bore sand cast in any length with or without ears, with lead joints, laid in vertical surfaces including disamntling of existing PVC pipes complete all as directed. (Note: Lead joint will be measure and paid separately)

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm bore cast iron bends with oval access doors(any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm bore cast iron DOUBLE Y with oval access doors complete all as specified and directed.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm bore cast iron bends with oval access doors(any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Supply only lead joint material for 100mm bore cast iron pipe and fittings etc complete all as specified and directed.

Supply only lead joint material for 75mm bore cast iron pipe and fittings etc complete all as specified and directed.

S&F 100mm MS clamp 40 x 6 mm flat iron and 12 mm dia round iron stays including bolts and nuts including securing to wall in PCC (1:2:4) and making good in cement mortar (1:3), complete all as specified and directed.

S&F 75mm MS clamp 40 x 6 mm flat iron and 12 mm dia round iron stays including bolts and nuts including securing to wall in PCC (1:2:4) and making good in cement mortar (1:3), complete all as specified and directed.

Dismantling loose concrete cover of RCC coloums, beams slabs, Chajjas, and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of Badarpur sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 2% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including plaster to make proper Geographic shape as per site requirement, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed.

Notes for item No. 139 (i) Whereever steel reinforcement bars are required to be provided the same shall be measured and paid separately under relevant items. (ii) Before placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and alllow to dry. To this prepared surface apply chemistic Zinc chromate primer at the rate of 2% by weight of cement or all as per manufacturers instructions. (iii) When plymix coating is in tackey condition guniting is done with plycrete admixture at the rate of 2% by weight of cement or all as per manufacturers instructions. Plycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer. (iv) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

All as per item No. 140 above but thickness of guniting 40mm (average thickness) and work shall be executed in two layers separately complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.

M&L Brick work with sub class 'B' brick staight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc complete all as specificed and directed.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & fair without using extra cement on brick/concrete surfaces complete all specified and directed.

M&L 5mm thick rendering of ready mix mortar of approved make (having ratio equivalent to CM 1:3) of ceiling surface finished fair even and smooth without using extra cement as whole or in patch complete all as specificed and directed.

M&L preparation of newly plaster surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed. (Note: Work be done through applicator approved)

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. (Note: Work be done through applicator approved)

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc., complete all as specified and directed. (Note: Work be done through applicator approved).

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash all as specified and directed.

M&L vitreous China wash basin, white, flat back size 550x400 including pedestal and angle iron bracket but excluding taps, waste, chain and plug and porcelain stopper all as specified and directed.

M&L for applying two coats of Oil Bound Distemper by using roller over a coat of primer over a coat of sanded prepared surface of wall care putty not less than 1mm thick, over prepared wall surface (old painted surface) prepared with sanding machine by using mechanical means as per manufacturer instructions complete all as specified and directed. (Note: Work be done through applicator approved. )

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation old plastered surfaces etc., complete all as specified and directed. (Note: Work be done through applicator approved).

M&L preparation old plastered surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for applying wall care putty not less than 1mm thick on wall / ceiling, surface even and smooth complete all as specified and directed.

M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.

M&L preparation of old steel and iron surface any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of cills, shelves lintel etc and cutting chases for concealed water tubing and making good ,cutting girth exc10 cm but nexc 20 cms.complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation of manhole/drain etc and getting out in soft/loose soil.

Returning filling including spreading, levelling watering and well ramming in layers n. exc 25cm thick in soft soils, complete all as specified and directed.

Removing surplus soil to a distance exceeding exc. 1.50 km but n exc. 5 km and depositing where directed

M&L for concrete bed to drain pipe including packing under hunching against the sides of pipe after they are laid and tested for 150mm bore pipe using cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate), complete all as specified and directed.

M&L for 150 mm dia salt glazed stone ware drain pipe type 'A' laid in trenches and jointed as specified including testing.complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section, in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate, smooth finished and reforming benching as required for 150mm bore of pipe.

Supply and fixing in repairs SFRC manhole covers 750mm x 750mm, 75mm thick with frame factory made complete all as specified and directed.

M&L for cement concrete 1:3:6 typr C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified

M&L for cement concrete 1:2:4 typr B-2 (using 40mm graded stone aggregate) as in surface channel as in benching/drains etc complete all as specified

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in coping bending rounded or chamfered on edges in CM 1:4 including necessary form work complete all as specified and directed.

S&F in repairs salt glazed stone ware gully traps 150 x 150mm square mouth `P' type complete all as specified and directed.

M&L precast cement reinforced concrete 1:2:4 Type B-1 for drain, cover slabs and similar work fixed in CM 1:4 complete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)

Removing building materials to a distance of 5km or beyond the lead included in the rates, including loading, unloading and stacking at the destination

Impregnating cream for injection into masonry or concrete wall 230 mm thick against capillary rising humidity:Rising bar super strong ( Product No 201) of chowgate building chemicals or equivalent / Pidilite / Dr Fixit/Sika/FOSROC complete all as specified and directed. (a) The surface must be sound, absorbent, clean, free from dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debris or any separation layers. (b) The plaster must be knocked off at least 50 cm beyond the visibility penetrated area. (c) Damaged mortar joins are to be scraped out to a depth of approximately ly 2-3 cm. All sharp edges/joints need to be leveled loose concrete to be removed. (d) Drilled bore holes at ground level horizontally. The boreholes drilled horizontal into masonry. ( e) The hole shold be drilled until a depth of approx 5 cm ( for a 6 cm thick wall ) before the the end of the wall is reached. The bore holes shold have a diameter of 12 mm upto a maximum of 15 mm and should be apaced approx 100 to 120 mm apart and the verticle offset is 6 cm max. (f) Before inserting Risingbar Super Strong or equivalent the boreholes must be cleaned from boring dust by using air pressaure. It is not necessary to pre wet the borehole. (g) For applying of RisdingBar Super Strong or equivalent the dosing system inserted as far as possible into the boreholes. While dosing the products uniformly, the injection nozzle is pulled out leading to a completely filled borehole (h) Treatment of highly absorbent masonry might require repeated filling of the bore after 24 hours. Depending upon extent of damage, RisingBar Super Strong or equivalent cab re injected into the same hole after 24 Hours. Depending on absorbency, application or masonry thickness 0.1 to 0.15 litre/M with 10cm wall thickness.

M&L anti termite treatment alongwith external wall below concrete on machinery apron using chemical emulsion @ 2.25 ltr/Liner metre including drilling and plugging holes etc in apron complete all as specified and directed. (Note: Work be done through applicator approved)

M&L antitermite treatment of soil under existing floor using emulsion @ 1 Ltr per hole, 300mm apart incluyding drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement and 2 coarse sand) to match the existing floor complete all as specified and directed. (Note: Work be done through applicator approved)

M&L antetermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene base solution) @ 0.50 Ltr/Hole by drilling 6mm dia holes at a downward angle of 45 degreee at 150mm centre to centre and sealing the same complete all as specified and directed. (Note: Work be done through applicator approved)

Raking out joints and flush pointing in cement mortar 1:3 to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, fixing of nuts and bolts as necessary, gusset plates, riveting, etc., conforming to Fe -290 Gde E-165 complete all as specified and directed.

Dismantling of Asbestos cement(corrugated, semicorrugated, etc.) sheets in roof coverings, any gauge, thickness, including Nainital or similar pattern roof coverings complete.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge fixed with self tapping screws complete all as specified and directed.

S&F TMT bars 6mm to 8mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed.

M&L for preparation of old decorated surfaces and applying two coats of white wash on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of white wash on wall complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd & directed.

M&L for machine cut kota stone slab in skirting 18-20mm thick over 10mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Material and labour for preparation by mechanically of old structural steel surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (approved tint) over a coat red oxide primer complete as specified and directed. Note : (i) Structural steel will be prepared/cleaned by mechanically. (ii) Primer and paint will be done before placing of roof sheets.

S&F in repair vitreous chinaware wash hand basin flat back of size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, and cutting for pinning in ends of brackets in wall etc complete all as specified and directed.

S & F vitreous china, white european type water closet, including PVC seat cover, fixing with brass bolts, jointing to flushing cistern and flush pipe complete all as specified and directed.

M & L for chromium plated jet spray including connection pipe comlete all as specified and directed.

S&F CI Cowl for 100mm bore of CI spun pipe.

M & L for 100mm nominal size double wall corrugated HDPE pipes stiffnesss class SN 8 high density, polyethelene pipe resistent to chemicls, easy and light weighted, long living, low friction, flexible, sun resistant pipe and laid in trenches including demolition of old pipes complete all as specified and directed.

All as per item above here-in-before but 150mm bore pipe and including connection in existing manhole and making good.

S&F curtain rods of stainless steel 25mm dia with and including SS decorative finials and SS brackets suitable for SS curtain rod fixed on wall etc complete all as specified & directed. Note : - (a) Only length of SS curtain rod shall be measured and paid. (b) SS decorative finisals and brackets shall be provided for each curtain rod and rate shall be incuded with SS curtain rod.

S&F 15mm dia bib tap with capstan head, screwed down, screwed for iron pipe, fancy type, cast copper alloy, chromium plated with wall flange complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mm x 750mm x 250mm including complete

S&F in repair sink made of stainless steel 1mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 495 x 420 mm, bowl size 410 mm x 330 mm x 160mm complete all as specified and directed.

S & F PVC connection 15mm dia & 600mm long for hot water using with gyser with two nos brass check nuts complete all as specified & directed.

Dismantling of old false ceiling/tiles complete all as specified and directed by the Engr-in-Charge.

S&F Anodised aluminium snap grid of size 605mmx605mm frame work for false ceiling and including 12mm thick fibre insulation boards ordinary type, fixed to timber/alum/GI framework with or without screws complete all as specified and directed by the Engr-in-Charge.

M & L for green marble 15 to 18mm thick (table rubbed and polished) in cooking platform/floor, trades & risers, machine cut laid over 20mm thick screed bed or beding layer in CM 1:4 and jointed and pointed with grey cement mixed with colour pigment to match the shade of the slab including rubbing and poishing and making edges chamfered and demolition of old stone slab of any description, complete all as specified and directed.

M & L for providing and injecting chemical emulsion for post construction antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the substructure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete.

S&F 75mm thick heavy duty stainless steel butt hinges for cup boards complete all as specified and directed.

S & F 50mm drawer lock (as approved) gde-I complete all as specified and directed.

Description of Work / Item(s)

Amount

Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets, light fittings) and deposit the same to MES Store and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.

M&L for concealed point wiring with PVC FRLS insulated multi stranded unsheathed cable 1.5 sqmm size with stranded copper conductor, 1100 volts grade conforming to IS-: 694 drawn in and including concealed PVC rigid conduits 20 mm dia incl cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed with concealed sunk in pressed steel terminal boxes of 1.6mm thick factory made and painted with stove enameled black paint covered with 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washers including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-

(a) One light/fan/bell point controlled by one way switch 5 amps.

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

(d) One two way point controlled by 2 way switch 5 amps.

All as per item No. 2 (a) here in before but with 2x2.5 Sqmm and 1x 1.5 sqmm cable for earth connection for one 3 pin socket outlet 15 amps independent board complete all as specified and directed

S&F of switch pian type 5 amps single pole one way complete all as specified and directed.

S&F of switch piano type 15 amps single pole one way complete all as specified and directed.

S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.

S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.

S&F of 2 way switch complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed

S&F of electric bell Ding-Dong AC 230 Volt SP with brass screws and cup washers all as specified and directed.

M & L for Decorative walll light fixture made up of Polycarbonate, Spiral B-22 Base suitable for 9 Watt LED Bulb complete Watts CITY 3

S & F of Lamp holder,PVC /Polycarbonete type with back plate suitable for batten fittings with connections complete all as specified and directed

S&F of LED bulb of 7 watt complete all as specified and directed.

Supply, laying and drawing in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S & F LED light fitting 1X10Wbulkheadluminaires includin LEDlight driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.

S&F metal type exhaust fan single phase 230/240V of 300 mm sweep with louvers including cutting of holes in a round shape and including fixing the exhaust fan complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F of electric storage water heater of capacity 25 ltr with vitreous enamel coating with all accessories and fittings arrangements and testing after installation complete all as specified and directed. Note: Rates are inclusive of connection from existing pipe line to electric storage water heater.

S&F of Single pole MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity, complete all as specified and directed.

S & F of Fresh air ventilation fans of 230 mm sweep complete all as specified and directed

Supply and Fix HOT press moulded SMC Meter box of inside dimensions 250x150x155 mm with hinged doors and all accessories required for fixing 01 nos single phase digital electronic meter complete all as specified and directed.

S&F PVC connection with brass nipple of size 15 mmx600 mm long with ISI marked suitable for hot and cold water of 25 ltrs capacity of geysers as hot and cold water connection complete all as specified and directed.

Supply and fix electronic meters temper proofLCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH complete all asspecified and directed.

M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

M/s Pragmatic Infrastructure Limited

Third Wave Services Pvt Ltd

M/S ALPHA CONSTRUCTIONS

GANGA INFRABUILD PVT LTD

M/s Matadeen Ramchandra Agarwal

AMIT ASSOCIATES

M/s Pragmatic Infrastructure Limited

Third Wave Services Pvt Ltd

M/S ALPHA CONSTRUCTIONS

GANGA INFRABUILD PVT LTD