SPECIAL REPAIRS TO BLDG NO JACARANDA 1 3 SINGLE OFFCRS LIVING ACCN AT DSSC WELLINGTON

Amount

Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing) complete all as specified and directed.

Demolition of cement concrete (unreinforced )in ground floors and pavings not exc 15 cm thickness (below or above ground level)and removing debris off the site complete all as specified and as directed.

Demolition of concrete of any description and in any position as in drain etc complete all as specified and as directed.

Taking down chowkhats or frame n.exc 1.5 Sqm each without taking off shutters from frame, and making good surface complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n exc 4 Sqm each without taking off shutters from frame and removing to store complete all as specified and directed.

Taking down shutter of any descripton or in any position area exc 1.0 Sqm but not exc 2.0 Sqm complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for drain,sunken floor etc complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L Light shade coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed. Make: SOMANY/KHAJARIA/RAK CERAMICS

All as per item No11.00 here-in-before but set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10 mm thick CM 1:3 complete all as specified and directed.

M&L Non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified. Make: SOMANY/KHAJARIA/RAK CERAMICS

M&L Coloured glazed ceramic tiles of size 300x600x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Hardcore of gauge not exc 63 mm deposited, spread & levelled in layers not exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate as in floors for levelling course including finishing the surface even and rough to receive the top finish complete all as specified and directed.

M&L Providing Gypsum board False ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling including taking down and refixing of electrical fittings etc complete all as specified and as directed. Make: Saint Gobian Gyproc/IndiaGypsum/ Armstrong Notes: i) The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittings such as ceiling fan, light fittings etc., and keep in safe custody of same till refixing. (ii) The unit rate includes taking down of existing false ceiling of any description completely.

M&L Preparing of gypsum board false ceiling with primer and applying 1.5 mm thick wall care putty and applying two coat of Oil Bound Distemper over one coat of primer complete all as specified and directed.

Demolition of Reinforced cement concrete in roofs, floors (other than ground floors, beams, staircases, landing, chajjas and similar suspended work) and removing unserviceable debris off the premises complete all as specified and directed.

Demolition of brick work/PCC block masonry/stone masonry etc built in cement mortar, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed

S&F 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed. Make: ACTION TESA/CENTURY/GREENPLY Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.

M&L Granite 18-20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:3, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc complete all as specified and as directed.

S&F Pressed steel frames of 1mm thick factory made of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including shop coat of primer and fill and compacted the back of steel frame with PCC type B-0 using 12.5 mm grade crushesd stone agg complete all as specified and as directed.

S&F Pressed steel frames of 1mm thick factory made of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and fill and compacted the back of steel frame with PCC type B-0 using 12.5 mm grade crushesd stone agg complete all as specified and as directed.

M&L 35mm thick flush shutter, solid core construction, with block board core and plywood face panels,commercial type on both sides including 6 mm thick lipping around the shutter complete all as specified and directed.

S&F UPVC white colour Three track Sliding Windows with glazing all as per manufacturer's direction and following specifications :- (i) UPVC Window frame shall be made of PVC material confirming to IS 10151, the Window frame shall be made of extruded UPVC section having overall dimension of 95 x 54 having wall thickness 2.5 mm ± 0.2 mm . (ii) Corners of wall frame shall be shall be joined by MS galvanized brackets. Joints shall be mitred and plastic welded. (iii) The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iv) The profiles should be two or three chamber system which shall provide high insulation properties. (v) Glazing shall be provided with 5mm thick Plain / frosted glass fixed with appropriate size beading as per manufacurer's specifications. (vi) Stainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter.

Note For Item No 27.00: (i) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

S&F UPVC door with shutters with following construction profile :- (i) Overall frame sectional size 60x 80 mm with wall thickness 2.7+/- 0.2mm extruded sections. (ii) The corners will be plastic welded. (iii) The hinge side vertical outer frame shall be reinforced wiht galvanized steel profie of wall thickness 1.2mm +/- 0.2mm. (iv) The door shall be fixed to walls using 8 mm dia 80mm long MS screws minimum 3 Nos on each side. (v) The glazing shall be fixed to door frame with UPVC standard beadings of 24.05 x 16 mm of 2 mm thick. (vi) The bottom portion of door shutter shall be provided with UPVC board 5mm thick and 1 m in height and the balance shall be glazed excluding the shutter frame area. (vii) The shutter shall be fixed to frame using 3 Nos of 3D hinges. The door shutter shall be provided with mm thick plain/frosted sheet glass and 5mm UPVC board with EPDM rubber gasket, one mortice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as speicifed and as directed.

Notes for Item Nos 29.00 (Glass or wiremesh shall be paid separately) (i) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (ii)Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.all as specified and directed Make :Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

S&F in repairs White/Coloured UPVC partition complete all as per manufacturer's instructions and following specifications all as directed:- (i) UPVC partition frame shall be made of material confirming to IS 10151 of extruded UPVC section having over all dimension of 65 x 55 having wall thickness 2mm ± 0.2mm. (ii) Corners of frame shall be jointed by MS galvanized brackets mitred and plastic welded. (iii) The profiles should be single chamber system which shall provide high insulation properties. (iv) Glazing shall be 6mm thick frosted glass fixed in frames with appropriate beading as per manufacturer's specification. (v) The bottom portion of partition for 1 m height and above 2.1m hight will be provided with UPVC hollow board not less than 6 mm thick. (vi) All the fittings shall be provided with using self tapping screws. Note: The entire fixing shall be done as per manufacturer's instructions and specification and complete all as specified and directed. Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

S&F UPVC ventilator with frame will be of overall size 60 x 58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm long MS screws minimium 2 nos on each sicde. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix. Note: (i) The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (ii) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. (iii) Net opening will be measured for payment purpose.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled & fixed 75 mm long complete all as specified and directed.

S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 125mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 125 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 250mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed.

S&F 9mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as specified and as directed.

M&L 2nd class hard wood Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads sec area ecx 6 Sqcm but not exc 13 Sqcm complete as specified and as directed.

M&L Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type B-1 using 20mm graded stone aggregate and setting in mortar,(1:4) complete, in walls complete all as specified and as directed.

M&L Precast cement concrete solid building blocks masonary type C-1, 1:3:6 (20 mm graded aggregate ) exc 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed

All as per item no 44.00 here-in-before but using old blocks obtained from demolition complete all as specified and as directed

S&F Second class hard wood plain, solid straight chowkats/hand rails and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws to steel/wooden frame work complete all as specified and as directed. Note: Rate quoted shall be inclusive of necessary framework.

M&L 15mm thick Rendering in cement Mortar 1:6,on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 20mm thick Rendering in cement Mortar 1:4 mixed with liquid water proofing compound as per manufacturers' instructions on stone masonry surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately.

M&L Preparation of new surfaces of walls and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint complete all as specified and as directed.

M&L Complete removal of existing treatment on surfaces of wall and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distemper over a coat of primer by approved applicator of the manufacturer of the paint complete all as specified and as directed.

M&L Preparing newly plastered surfaces of external walls and applying exterior wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction complete all as specified and as directed. Make: APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or NEROLAC EXCEL MICA MARBLE

M&L Preparing old plastered surfaces and application of two coats of Synthetic enamel paint complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosote oil complete all as specified and as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying exterior wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction complete all as specified and as directed. Make: APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or techno-commercially equivalent.

M&L Preparation of new /old plastered surface of wall or ceiling and applying three coats of white wash complete all as specified and as directed.

M&L 2nd class Hard wood decorative Weather boarding,clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and as directed.

S&F 2nd class Hard wood scantling as in rafters, purlins, trusses etc. clean sawn complete all as specified and as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling and Bio-wash to fight microbial growth and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti-algae weather proof paint for RR Masonry wall complete all as per manufacturer instruction as directed. Note: The painting work to be executed by authorised applicator of the manufacturer.

M&L 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed.

S&F Sheet glass ordinary quality 4mm thick with oil putty in squares with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and directed.

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 ,using 20mm graded stone aggregate as in floors, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in Sub base floor finished even and fair complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specifed and directetd.

M&L Chequered cement concrete tiles of size 30cmx30cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick thick screed bed in CM (1:6) complete as specified and as directed.

Dismantling old Interlocking Tiles(Undulated patch) of any description and any thickness fixed with any base or sub base and refix the same after making good the surface including joint with necessary colour or white cement pigment complete as specified and as directed. (Sub base shall be measured and paid seperately)

S&F Steel rolling shutters , 1.25 mm laths thick without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete, push pull or manual type including taking down existing complete as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete as specified and as directed.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggragate steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete as specified and as directed.

M&L Plain cement concrete type-C2, 1:3:6 (40mm graded agg) as in surface channel and drains incl necessary formwork complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exc 50m and making good surface in soft /loose soil complete as specified and as directed.

M&L Cement concrete type D-2, 1:4:8, using 40mm graded stone aggregate as in foundations,filling and mass concrete complete as specified and as directed.

S&F Rolled Tubular sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality B complete as specified and as directed.

S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenth of 550 MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete as specified and as directed.

S&F Pre-painted galvalume Aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete as specified and as directed.

M&L Preparation of surfaces of new steel of any description over 10 cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Excavating in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation etc and getting out in hard /dense soil complete all as specified and as directed.

S&F UPVC (SWR) of pressure rating not less than 6kg/cm² pipes single socketed in any length with rubber ring joints laid in trenches 160 mm bore complete all as specified and as directed.

M&L Concrete bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested PCC 1:3:6 type C2 bore of pipe in mm 150 mm bore complete all as specified and as directed.

Cutting into existing manhole for connecting new drain pipes of 150 mm internal dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching complete all as specified and as directed.

M&L Precast RCC cover slab( for manholes ) 1:2:4, type B1, using 20mm graded stone aggregate with plain faces including setting in CM 1:4 complete all as specified and as directed.

S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points complete all as specified and directed.

S&F Rain water gutter of galvalume sheet of size 150x150 incl all clamps etc complete all as specified and directed.

Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 25 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 25 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall complete all as specified and as directed.

S&F Vitreous china wash down water closet pan, pedestal pattern, colour white, closed pattern with flat bottom with and including white coloured PVC seat cover, mild steel chromium plated or aluminised hinging device flushing cistern and P/S trap including connections to drain (or outgoing pipe) and taking down existing water closet etc., complete all as specified and as directed. Make : Cat No C-8854 P(180) of Parryware/ Cat No SLS WHT-67515 & SLS WHT-6201 of Jaquar/ techno-commercially equivalent.

S&F Vitreous china Wash Hand Basin, White, counter top oval type of size 550x450x200mm fixed over and including 18mm thick Jet black Granite slab of suitable size for WHB, with open in centre fixed over brackets including 32mm waste coupling, 32mm dia waste pipe750mm long etc.,including taking down existing one complete all as specified and as directed. Make: Cat No.FLS-WHT-5701 of Jaquar (or) C0431 Cascade NXT of Parryware or Cat No.10017 of Hindware or techno-commercially equivalent. Note: The unit rate quoted shall be deemed to include the cost of WHB, Granite slab, brackets, waste coupling and waste pipe

S&F in repair Central hole basin mixer with out popup waste system with 450mm long braided hoses complete all as specified and directed. Make: Cat No - G4715A1 of Parryware/ F730009 of Hindware/ CON-169KNB of Jaquar or techno-commercially equivalent.

S&F in repair Wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower) complete all as specified and directed. Make: Cat No G4617A1 of Parryware/ F730022 of Hindware / CON -281KN of Jaquar or techno-commercially equivalent.

S&F in repairs two way Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS , screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed. Make: Cat No.CON-041 of Jaquar or T3534A1 of Parryware or specified makes or techno-commercially equivalent.

S&F in repair health faucet CP including 1.2m long flexible tube and wall hook complete all as specified and as directed. Make:Cat No. E8342A1of Parryware /F160001 of Hindware/ ALD-CHR 565 of Jaquar or techno-commercially equivalent.

S&F in repair Over head shower 200 mm x 200mm including shower arm 20mm dia & 375 mm long round shape with 90 ° bend for wall mounted showers of with flange complete all as specified and directed . Make: Cat No T9975A1,T-9802A1 of Parryware / F160142,F160024 of Hindware/ OHS-CHR-1619,SHA-479L450 of Jaquar or techno-commercially equivalent.

S&F in repair soap dish holder ,CP complete all as specified and directed . Make: Cat No T6902A1 of Parryware/ F580004 of Hindware/ ACN 1131N of Jaguar or techno-commercially equivalent.

S&F in repair toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed . Make: Cat No T6906A1 of Parryware/ F890003 of Hindware/ CAN-1151N of Jaquar or techno-commercially equivalent.

S&F in repairs SS Tubular towel rack 600mm long without lower hangers but with three hooks, Chromium plated fixed on walls complete all as specified and as directed . Make: Cat No.ACN-1181FHS of Jaquar or T6008A1 of Parryware or techno-commercially equivalent.

S&F in repairs Corner glass shelf made out of glass with cp guard rail and wall fixing accessories of 300mm radius matt finished, chromium plated (MCH/Colour CP) with brass brackets as per fixed on walls complete all as specified and as directed . Make: Cat No.ACN-1173 of Jaquar or T6010A1 of Parryware or techno-commercially equivalent.

S&F in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. Make: Cat No. CON-053KN of Jaquar or G3053A1 of Parryware or techno-commercially equivalent.

S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.

S&F in repairs 5.5 mm th Looking mirror of size 900x600mm mounted on 6mm thick Plywood backing or AC sheet backing including framing with 1st class hard wood of size 40x40mm decorative type polished and fixed to wooden plugs with chromium plated brass screws and cupwashers/or chamferred glass from all sides fixed with steel screws complete all as specified and directed.

S&F in repair Single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as spd and directed. Make - Cat No G3335A1 of Parryware/Cat No F320027 of Hindware/Cat No DRC-37165 of Jaquar or or techno-commercially equivalent.

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed.

S&F in repair 100mm dia PVC floor multi trap with and grating of size 100 x 100 mm complete all as specified and as directed.

S&F in repairs, stainless steel plate racks made of stanless steel 0.80mm thick sheet standard size 24'x36x10" and design as approved by GE, complete all as specified and as directed.

S&F in repairs 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcm in any length with rubber ring joint complete all as specified and as directed.

S&F PVC valveless, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., including taking down the existing one complete all as specified and as directed.

S&F in repairs Pillar tap 15 mm bore, cast copper alloy with capstan heads, chromium plated, fancy type, confirming to IS, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes, fixed complete all as specified and as directed.

S&F in repairs Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule, complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with brass nuts of length 600 mm each complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Taking down Cast iron / PVC pipe 75mm/ 110mm jointed in cement mortar taking out of wall including all fittings, heads, sheos, bends, swan-necks, etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore provided with acess door complete all as specified and as directed.

S&F PVC (SWR)110mm bore branch piece single(single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR)75 mm bore branch piece single(single Y) equal or Unequal complete all as specified and as directed.

S&F PVC (SWR)110mm bore branch piece single(single T) equal or Unequal complete all as specified and as directed.

S&F PVC (SWR)75 mm bore branch piece single(single T) equal or Unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) 1000 litres capacity, triple layered, FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. Make: Sintex/Polycon/Vectus

S&F Mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

Dismantling existing tanks exc. 500 lit & not exc. 1000 litres capacity, removing off the site complete all as specified and as directed.

S&F 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed,weight 455 gms complete as specified and as directed.

S&F 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F in repairs Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S&F in repairs Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S&F In repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S&F Stainless steel sinks, 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed . Note:Old existing Surface Mounting 4 ft/2ft ftg/ Wall mounting/down light/ Bulk Head/Bldg Security light fittings of any type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Disconnecting/ dismantling of old existing unserviceable DB any type/way 240/415 Volts with their old/unserviceable burnt MCCB/MCB's etc. complete all as specified and directed. Note for Item Nos 142.00 to 144.00 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M&L Concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex. Make of conduit-Precision/Modi/finolex.

One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps complete all as specified and directed.

One switch socket outlet point 5/6 Amps on independent board complete all as specified and directed.

All as per Item No 145.00 here-in-before but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and directed.

Notes for Item Nos 146.00 to 148.00 : 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M&L Concealed sub-main wiring alongwith earth wire of size (2 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Make of conduit-Precision/Modi/finolex. NOTE : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately. 3) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSBXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular switch with indicator, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXIW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACTXMIIX04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACTXMIIX06, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular cover plate suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACVPPCWV04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular cover plate suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACVPPCWV06, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F TV coaxial socket,1 module complete all as specified and as directed. Cat No.-ACVKT0W001 Verona of Crabtree(Havells) or Make : Legcus of Legrand or Livia of Schneider

S & F Internet socket RJ-45, suitable for CAT 6 cable, shielded, folded metal 1 module complete all as specified and as directed. Cat. No. ACVKJWW451 Verona of Crabtree(Havells) or Legcus of Legrand or Livia of Schneider

NOTE for Item Nos 151.00 to 165..00: The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F Concealing of Coaxial TV cable, RG-6 in pvc conduit with less signal losses complete all as specified and as directed. Make: Cat No.WHOJTTKARG06 of Havells fixed with necessary accessories complete all as specified and as directed

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor.

S&F in repairs call Bell, AC, Buzzer Ding Dong type 230 Volt complete all as specified and directed. Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells.

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings complete all as specified and directed. Make : Havells, Cat No:LUMILINEPLUSBS10W LED865SPCSSIND or techno-commercially equiv In Jaguar/Philips

S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make :Havells, Cat No:ENDURALINEARPROBS20W LED865SPCSSIND or techno-commercially equiv In Jaguar/Philips

S&F Wall mount bed side decorative warm white fixture of 3W SS finish with opal glass diffuser complete all as specified and directed. Make : Luker, Cat No LWL 127-1 or techno-commercially equiv in Jaguar/Philips

S&F Decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including necessary wiring/cabeling alterations of auto make the fitment completely capable for use as Engagement light & connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOAJE1TZ1I060, Model - Florentine or techno-commercially equivalent in Philips/Jaguar

S&F in repairs LED lamps 9W, 3000K with B-22 base capcomplete all as specified and as directed. Cat No: LHLDDEBIA5R009 of Make Havells or techno-commercially equiv In Jaguar/Philips

S&F Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W or min 800 lumens with IP 66 with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make:Havells, Cat no HEXAFT10WLED857SSYMBOPC or techno-commercially equiv In Jaguar/Philips

S&F Energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having TOP Opening seperate driver compartment with IP66 protection including 40mm dia bracket bended into 120 degree angle and making connections in flexible conduit all as directed. Make: Cat no ENDURASUNDOWNSL30WLED757PASYBOPC Endura Sun Down of Havells or techno-commercially equiv In Jaguar/Philips

Notes for Item Nos 170.00 to 176.00 : 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for fixing one single pole MCB 20A C Series with Breaking capacity 10KA all as directed. Make: L&T, Cat No : DBMPS120SD or techno-commercially equiv in Legrand/ABB

S?&F, Installation and Testing Vertical type Storage electric water heater (Geyser) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated, suitable for a pressure rating of 0.8 MPa Bar with 7 years warranty on inner tank, 4 years on heating element & 2 year comprehensive warranty with & including connected accessories and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and directed. Model - BIANCA. Make: Havells, Cat No: GHWCBNTWH025 or techno-commercially equivalent in V-Guard/Bajaj Note : (i) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surfaces and matching to the existing/original surface is deemed to be included in the unit quoted rates (iii)The cost of taking down old unserviable gyser and tranportation of old gyser to be submitted to MES Store yard is deemed to be included in the quoted rate.

Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz,800RPM, Air delivery not less than 860 CMH, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventilator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified and directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. (ii) The cost of transportation & Submitting old unsv Exfan to MES storeyard is deemed to be included in unit quoted rates.

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventilator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells. Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the isturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. (ii) The cost of transportation & Submitting old unsv Exfan to MES storeyard is deemed to be included in unit quoted rates.

S&F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/Siemens

S&F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU10S40633C or techno-commercially equivalent in Siemens/Legrand.

S&F Concealing MCB, DB, TPN, 04 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN004DD or techno-commercially equivalent in Siemens/Legrand. Note: The cost of disconnection of electrical connection of Old existing cable from old DB and connected to new DB by providing clamp is deemed to included in quoted rate.

S&F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T, Cat No-AU10S20(06-32)3C or techno-commercially equivalent in Legrand/ABB/Siemens.

S&F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T, Cat No-AU10S20403C or techno-commercially equivalent in Legrand/ABB/Siemens.

S&F Miniature circuit Breakers, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered with breaking capacity 10 KA complete all as specified and as directed. Make-L&T, Cat No-AU10S10(06-32)3C or techno-commercially equivalent in Legrand/ABB/Siemens.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI wire of 4mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost complete all as specified and as directed. Make of GI Pipe : TATA/Jindal/Prakash

S&F Concealing of bottom base of FRP enclosure of size 1000(L) x 6900(W) x 280(D) approx or next higher size with locking arrangement and making flush to the wall, fixing TPN MCB DB inside meter box with suitable accessories, incl taking down the Existing Energy meters and refixing the same meters by providing necessary electrical connection complete all as specified and directed . Make: Sintex, Model No GSMB-8135 or techno-commercially equivalent in Hensel/Rittal/OBO. Note : (i)The cost of making good the disturbed surface and matching to the existing surface is deemed to be included in the unit quoted rates. (ii) The cost of making cut or hole for the enclosure as per site requirements and refixing the energy meter inside box is deemed to be included in the unit quoted rates.

Taking down the existing electric water heater, replacing unserviceable spare parts like, PVC pipe to Steel braided hose for inlet and outlet water connections etc of storage type electric water heater (Geyser) of any type and any make up to 25 Ltr capacity, reassembling the geyser after servicing and refixing in the same position/location including water line connections and testing on completion all as specified and as directed.

Labour only for cleaning & refixing of serviceable LED light fittings of any type/size/wattage obtained from site here in before with & including flexible conduit from fittings to ceiling rose (as applicable) complete all as specified and directed. Note : The ceiling roses will be measured and paid separately.

ACE PROMOTERS

sree devi construction

P K ENTERPRISES

GMS Builders

Sree Constructions