PROVN OF CERTAIN SPECIAL REPAIR, LBW WORKS AND REVENUE UNDER AGE B/R-I AT BB CANTT, SRINAGAR

Amount

Excavation in trenches, n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth in foundation shafts, walls, cesspits, manholes including sewage lines and getting out in soft/loose soil, complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L Brickwork with sub class B brick straight or curved on plan exc 6m mean radius buit in cement mortor in CM 1:6 complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Returing filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removal of excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L reinforced, cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canoppies, deck slabs, chajjas and in shelves and the like complete all as specified and directed.

M&L use and waste of form work to soffits of suspended slab such as roof slab, floor slabs, landings, chajjas and similar work not exceeding 200mm thick horizontal or sloping flat rough finished surface of concrete complete all as specified and directed.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with, complete all as specified and directed.

M&L Mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with, complete all as specified and directed.

M&L Round bars 16mm dia as in guard bars for windows including fixing in window frame, complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded aggregate) as in lintels, seismic and other similar bands, plinth courses, string courses, coping, kneelers, apex stones, plinth band, bed blocks, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick / concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of OBD over a coat of primer, over a layer 2mm thick of wall care putty complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over one coat of priming paint complete all as specified and directed.

Earth Filling under floor including spreading and leveling in layers n.exc. 25cm thick including well ramming and watering, complete all as specified and directed.

M&L Hardcore of broken stone or boulders of gauge n exc 63mm, deposited , spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed

M&L for providing 50 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate as in floor finished even and smooth, complete all as specified and directed.

M&L for chequered cement concrete tiles 25 cmx25cmx22mm thick, glossy finished, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick finished even and fair complete all as specified and directed.

M&L PCC 25mm thick type B-1, 1:2:4 using (20mm graded stone aggregate) as in floors, complete all as specified and directed.

M&L Non skid coloured ceramic tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm (min size 600 x 600mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surfaces 450mm x 350mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F 2nd class soft wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

M&L 40mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides and fixed to chowkhat SSR-2010 part-1 clause 8.25 complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepare to receive glass or gauge etc edges of framing plain chamfered fixed to chowkats, as per SSR-2010 Part-I clause 8.24(a) complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skelton shutters, open rebated and prepare to receive glass or gauge etc edges of framing plain chamfered fixed to chowkats, as per SSR-2010 Part I sec 8 clause 8.24(b) complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Butt hinges medium weight cold rolled of 100mm size complete all as specified and directed.

S&F Butt hinges medium weight cold rolled of 75mm size complete all as specified and directed.

S&F extruded aluminium alloy handles 150mm size ISI marked complete all as specified and directed.

S&F aluminium handles cast type anodised of size 100mm long ISI marked complete all as specified and directed.

S&F 150mm long, aluminium anodised barrel tower bolts, of extrucded section ISI marked complete all as specified and directed.

S&F 100mm long, aluminium anodised barrel tower bolts, of extrucded section ISI marked complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminium alloy, complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates, complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws complete all as specified and directed.

S&F 2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed.

S&F Plywood 6mm thick grade BWR type BB fixed with screws to timber frame work commercial type as in ceiling fixed with nails complete all as specified and directed.

M&L second class hard-wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails of sectional area exc 3 but n.exc 6 sq.cm complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

S&F vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and 10 ltr capacity complete all as specified and directed.

S&F Viterous china wash basin, white, flat back, size 630 x 450mm excluding taps but including brackets and waste pipe complete all as specified and directed.

S&F Waste coupling of chromium plated, 32mm dia (half or full threaded) (Minimum weight 32mm -45gms/40mm-60gms) complete all as specified and directed.

S&F brass CP 15mm bore single hole basin mixer for mixing Hot and Cold water screwed down for iron pipe and fixed complete all as specified and directed. Make : Jaquar

S&F Bib taps, cast copper alloy, fency type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F angle valve cast copper alloy chromium plated fancy type long body with capstan head screwed down with high pressure screwed for iron pipe or for brass ferrule of bore 15mm complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 450mm long with aluminium alloy brackets and guard rail complete all as specified and directed.

M&L cutting into existing manholes of internal dia of pipe 100 mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching complete all as specified and directed.

S&F PVC (SWR) pipes of 110mm bore single socketed, in any lenth with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

M&L for concrete bed to drain pipes of 100 mm dia (internal bore) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes of 110mm bore single socketed, in any lenth with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes of 75mm bore single socketed, in any lenth with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal of 75mm bore complete all as specified and directed.

S&F PVC (SWR) 75 mm floor trap,plain with grating,including jointing with cement solvent complete all as specified and directed.

S&F steel water tubing 15mm dia 'medium grade', galvanised, with all fitting and fixed complete to walls and ceillings or laid in floors, complete all as specified and directed.

S&F steel water tubing 20mm dia 'medium grade', galvanised, with all fitting and fixed complete to walls and ceillings or laid in floors, complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltr complete all as specified and directed.

S&F 20mm bore dia ball brass valve, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 20mm gun-metal, globe valves, with iron wheels head, screwed both ends for iron pipe and fixed complete all as speciifed and directed.

M&L 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type or J type or cranked hook bolts , in roofs, walls etc with grade of zinc coating 275.

M&L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete, all as specified and as directed.

S&F water closet (Squat pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe), complete all as specified and directed.

S&F vitreous China urinals, bowl type (back or corner wall type) , size of 465x355x265mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush ipe grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms) complete all as specified and directed.

S&F vitreous china wash hand basin (Pedestal type) white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts, complete all as specified and directed.

S&F Pillar taps 15mm bore dia of pipe, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Butt hinges medium weight cold rolled of 125mm size complete all as specified and directed.

S&F extruded aluminium alloy handles 125mm size fabricated type anodised, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and dircted.

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed.

M&L Slat-glazed stoneware drain pipes laid in trenches & jointed as specfified of 300mm dia complete all as specified and directed.

M&L Concrete bed to 300mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L Rendering 10mm thick on brick masonry surfaces or surface other than fair face of brickwork in CM (1:6) complete all as specified and directed.

M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specified and directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 liters complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed complete all as specified and directed.

S&F White Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.

S&F White Glazed ceramic tiles in vertical surfaces 350x250mmx7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and 10 ltr capacity complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy, fency type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement morter bedding (but not backing including rubbish off the permises complete). complete all as specified and directed.

M&L for Vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:6 for layig floor finish complete all as specified and as directed.

Dismantling timber scantling 40 sqm and over in section in any position as in unframed/framed work complete, all as specified and as directed.

Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and as directed.

M&L 4mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face only; fixed with screws to timber frame work, complete all as specified and directed.

M&L Khatamband pattern false ceiling,design as approved by GE with ornamental wood work including 12mm thick BWR plywood and necessary frame work and finally finishing with french polish (two or more coats) complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed.

M&L aluminium door air tight anodized frame made of size 100x45mm of sheet thickness 1.5mm with one or more rebate including jointing cleats hinges etc for fixing anodized aluminium door shutter fully paneled (two NOs of panel on each shutter) with 5.5 mm thick tinted plain glass shutter rail made of 80x45mm of sheet thickness 1.5mm (top, bottom, middle and side rail). Single/double leaf side hung type including necessary joint cleats, anodized aluminium fitting/aluminium fitting such as aluminium butt hinges 100mm long 4 NOs on each shutter, aluminium anodized tower bolt 200mm long 3 NOs for each door, aluminium anodized handle 150 mm 2 NOs ‘D’ type for each. Shutter & locking 6 lever of make Harrison one on each door, bottom door spring one on each shutter including hydrullic door closer. All door fitting except cleat shall be Ist marked (size of each door shall be as per site requirement) complete all as specified and directed.

S&F Door closer Hydraulically regulated designation No 2 universal type, suitable for door shutters 701 to 850mm in width and weight between 36 to 60 kg and fixed complete all as specified and directed. Make :- Amar

Preparing old decorated plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper over a layer of 3mm thick wall care putty complete all as specified and directed.

M&L for preparing old plastered/unplastered surfaces of wall and applying one coat of cement base paint, white or tinted on plastered surfaces, complete all as specified and directed.

M&L chequered cement concrete tiles with gray cement & pigment of size 20 cm x 20 cm x 25 mm thick glossy finished, set, jointed and pointed in neat cement slurry as in floor incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping etc including weathering, slightly rounded or chamfered and trading as directed by Engr-in-Charge complete all as specified and directed.

M&L Gypsum board tile ceiling of size 600mm x 600mm x 12mm thick fixed to ceiling with and including anodised aluminium snap grid frame work, of size 605 x 605mm, for false ceiling fixed to surrounding wall with rawl plug and screw and with hangers 4mm dia G.I. (upto 1200mm length) adjusting level fixed to roof truss(es) by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long screw as per manufacturers instruction complete all as spcified and directed.

Dismantlig wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in post holes each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 Mtr and making good surface in any type of soil complete all as specified and directed.

S&F steel work in tubular trussess, in post ,struts including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness incl nainital or similar pattern roof-covering complete all as specified and directed.

M&L 6mm thick one side decorative (teak face) plywood grade BWR, type BB, fixed with nails to timber frame work on walls complete all as specified and directed.

S&F in repair vitreous china urinals, bowl type flat back size of 465 x 355 x 265 mm white with grating and union for dischage pipe (back or corner wall type), complete including proving and fixing plugs, bedding urinal gainst wall in cement mortar 1:2 , securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F in repair 15 mm dia bib taps, cast copper alloy wth crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia and confirming to IS-781-1977, complete all as specified and directed.

S&F in repair automatic hand dryer complete set completed all as specified and as directed. Make : Cera, or equivalent as approved by Engr in Charge.

S&F in repair PVC flexible connection , 450 mm long 15 mm dia with PTMT nuts and washer, complete all as specified and directed.

S&F in repair 15 mm dia fancy type angle cock chromium plated with long shank and cup (concealed/angular type) complete, all as specified and as directed.

S&F in repair 20 mm dia CP towel rail 600 mm long with brackets fixed to wall with chromium plated screws complete, all as specified and as directed.

M&L for mild steel work as in posts and struts in fencing post including cutting tops to shape as directed, drilling holes notching for wire etc, flat iron filletys ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165.

S&F Fibre glass reinforced translucent plain sheeting 2mm thick fixed to wall with nuts and bolts etc comlete all as specified and directed.

M&L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick )and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed for one light point controlled by one way switch.complete all as specified and directed.

All as per item No 131 above for one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

M&L Point wiring with 2.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), surface type, drawing in and including PVC concealed conduit 25mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet inclluding one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 marked laminated sheet cover (for Mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistrand) FRLS copper conductor continious earth wire for one 15 Amp socket outlet controlled by one switch on independent board complete all as specified and directed.

M&L for switch piano flush button type 5 Amp single pole one way complete all as specified and directed. Make HPL/Standard/Polycab

S&F Socket outlet 2 in 1, 3 pin 5A complete all as specified and directed. Make HPL/Standard/Polycab

S&F Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin 5A and 15 amp flush type complete all as specified and directed by Engr-in-Charge. Make HPL/Standard/Polycab

S&F Ceiling rose surface backelite 65mm x 50mm ISI marked with 3 terminal including connecting and testting complete all as specified and directed. Make HPL/Standard/Polycab

S & F LED light fitting fixture 20W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified and directed. Make-Wipro/Philips/GE

S & F LED Mirror light fitting 1 x10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed. Make - Wipro Cat Part No LL20-111-XXX-65-NE or equivalent in Philips/GE

S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 4 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge. Make : Legrand/Hager/HPL

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified. Make : Legrand/Hager/HPL

S&F MCB SPN 40 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity all as specified and directed . Make : Legrand/Hager/HPL

Supply & fix ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose complete all as required or directed.

S&F Storage water heater 25 ltrs capacity vertical mounting AC 230 Volts including connecting cord and plug, safety valve, nuts and bolts, complete including grouting of nuts and bolts, complete all as specified and directed. Make Havells (Puro turbo)/Bajaj( Calenta)/CG(Solarium Aura)

Sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and directed.

M&L for old size brick well burnt, laid flat ,for cable protection complete all as specified and directed.

M&L for provn of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. Make – Ravindra,Oswal,Kinjal.

S&L cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 10 Sqmm x 2 Core complete all as specified and directed.

M & L for earthing with galvanized steel earth plate electrode 600 x600 x6 mm thick buried directly in ground (earth plate not less than 3.25 mtr deep below the normal ground level ) with top edge of plate not less than 2.5 mtr below the normal ground level connected to galvanized earth wire of 4 mm thick by means of nuts bolts, washers, check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) medium grade GI watering pipe 20mm dia with funnel and wire mesh and 40 mm bore GI pipe light grade proection pipe up to test point etc including excavation and charcoalt ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I.

S & F Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed. Make Legrand Arteor or equivalent in Anchor Roma / Havells Crab tree.

S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed.Make - Havells Cat Pt No-LHEOAOP7UZ6W010 or equivalent in Wipro/Philips.

S & F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Wipro/Philips/SYSKA

M&L in replacement of 6 Sqmm 1100volts grade heavy duty PVC insulated multistranded aluminium conductor and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart incl 4mm suspension GI wire one twin core cable flate porcelain insulators etc. Make: Paragon/PLAZA/Havells/KEI/HPL

Taking down carefully copper/AImn point wiring (Light,Fan/Point Socket or power) (fittings such as switches ceiling roeses, pendent, regulators, sockets etc to be measured & paid seprately) & making good to disturbed surface of walls/floors etc.

M&L point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl casing-n-caping medium grade with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated FRLS copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly one light point controlled by one switch complete all as specified and directed. Note : (i)Switch/sockets shall be measured and paid for separately.

All as per item No 156 above for one 3/5 pin 5 Amp socket outlet point controlled by one switch socket on independent board.

All as per item No 156 above for one 3/5 pin 5 Amp socket outlet point controlled by one switch socket on same board.

All as per item No 156 here-in-before but with 1100 volts grade stranded FRLS copper conductor single core 2.5 Sqmm (Nominal area )single core flame retardant low smoke (FRLS) PVC insulated and unseathed cable ISI-694 marked TEC and FIA approved in and including PVC casing-n-caping. ISI marked with all accessories PVC junction boxes mild steel sunken boxes (terminal boxes) made out of 1.5 mm thick MS steel suitable for switches/ sockets with earth dolly duly painted both internally and externally with two coats of anti corrosive paint over a coat of red oxide primer covered with and including 3 mm thick plastic laminated sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper condutor 2.5 sqmm (nominal Area), 1100 volts grade single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed. Note : (i)Switch/sockets shall be measured and paid for separately.

Supply and fixing Decorative box type fitting Pre-wired for and incl LED tube 18/20 watt 6000K 4 ft IP20 linear LED T8 tubular lamp with extruded aluminium/PC body and PC diffuser complete with inbuilt driver complete all as specified and directed. Note : Fitting,LED tube and driver will be of same make.

S&F Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.

S&F LED Building security light 30 watt pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronics driver and copper conductor 3 core of 0.7 sqmm from ceiling rose to security light complete all as specified and directed.

S&F Bracket made out of GI light grade pipe of 32 mm dia 1.5 mtr long bend to an angle of 120 degree with fixing arrangements on wall complete all as specified and directed.

S&F sheet metal enclosure with double door for DBs conforms to IS:8623. III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt complete all as specified and directed.

S&F MCB, 'C' curve SPN, 240 V, 25-32 Amp 240 volt breaking capacity 10 kA complete all as specified and directed.

S & F Blanking plate for suitable of any type DB for covering the blank place of MCB SP of any type of capacity including suitable fixing material, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core. Make: Polycab/ Finolex/ CCI

S&F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection twin core cable flat of size 6 sqmm. Make: Plaza / Finolex/ Anchor

S&F Off load LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps.

S & F Recess mounted LED luminaire with complete diffuser 36W , 2'x2', Flat Panel Ultra Slim powder coated CRCA housing, heat sink complete all as specified. Make-Wipro(CRCO10R038HP57GL)/Philips (RC380BLED34S-6500G3PSDOD) /CG(LCPL-36-CDL(2X2))

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Wire : HPL/Havells/KEI

Taking down carefully after disconnecting electrical connections of existing servicable sheet metal encloser DB of MCB / MCCB along with all submain wiring and MCB and MCCB and refixing the same DB alongwith same material with out any damage after complete of wall paneling.

M/S TAJ DIN KHARI