SELECTION OF CONTRACTOR FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF MATERIAL RECOVERY FACILITY (MRF) CENTRE IN SAGAR, MADHYA PRADESH UNDER SAGAR SMART CITY MISSION

Civil Work

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of1 m above ground level and removal of rubbish upto a distance of 50 meter outside the periphery of the area cleared.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Moorum/Hard copra

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate

Centering and shuttering including strutting, propping etc.and removal of form for : Foundations, footings, bases of columns, etc. For mass concrete.

Centering and shuttering including strutting, propping etc.and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc.and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire upto floor two level including all wastage etc. complete. Thermo-Mechanically Treated bars.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor two level excluding cost of centering, shuttering, finishing and reinforcement. Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Brick work with well burnt chimney bricks in bulls patent trench kiln manifactured by ghol process,crushing strength not less than 40kg /sqcm and water absorption not more than 15% in foundation and plinth. Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with of class designation 40 in super structure above plinth level up to floor 2 level including the cost of scaffolding. Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 100 average compressive strength in superstructure above plinth level up to floor 2 level including the cost of scaffolding : Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

15mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand).

Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. Two or more coats on new work.

Providing and applying 1.5 mm thick (in two coat) white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes.

Providing corrugated Galvanised sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in orizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m²

Electrical Works

Supplying, installing, testing and commissioning of 11/0.4 K.V. 3 Phase 50 Cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side hand operated off load, Tap changer switch, above 100 kVA rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil conservator with drain plug, oil filling hole with plug dehydrating silica gel breather, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil up to desired level and transformer installing on existing structure with all Required materials arrangements as required as per IS specification. Aluminum wound 100 kVA

Supplying installing and testing of AB isolating switch assembly set gang operated suitable for 11/0.4 KV, DP structure with brass part contacts, operating rod with required GI pipe, handle locking arrangement on On-Off position conforming to IS complete with required material and installing on existing structure to complete the job as required as per specification. 11 kV

Supplying, installing, testing of 11 KV D.O. fuse assembly with brass part contact for 11/0.4 KV DP Structure set of 3 with fuse with barrel with required fuse element & other materials as per specification on existing D.P. structure as required.(set of 3nos.) 11 kV

Supplying, installing, testing and commissioning of LT Distribution Box with TPN isolator 200 amper on incoming,bus bar and 6 S.P.M.C.C.B.of 90 A" .on outgoing side for 100 KVA transformer

Supplying, installing, testing and commissioning of Lightning Arrestors (i) 11 KV Gapless, line type

Supplying, installing, testing of earth Coil (coil of 115 turns of 50mm dia, and 2.5 Mtrs. Lead of 4 mm G.I wire.

Supplying and drawing of stranded Aluminium Conductor Steel Reinforced (ACSR) confirming to IS:398-1976 of approved make, stringing, making off complete with binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required and clearing of obstacles (if any) etc. ACSR 6/1 - 4.09mm dia (Raccoon) with equivalent copper area 48 Sqmm (0.075 sq inch) equivalent calculated Aluminium area 77.83 Sq.mm.

Supply of XLPE Insulated power cable (conforming IS- 7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor. ARMOURED 3½ CORE 240 Sq.mm.(XLPE)

Supply of support for overhead line RS joist / H-beam of I.S. standard including welding, drilling of required hole etc. complete as required. H-Beam 152x152mm , Std weight 37.1 kg per meter

Supplying of angle/channel flat iron fitting for overhead lines such as cross arms, clamps, brackets, welding and other necessary materials as per specifications.

Painting of pole bracket cable protecting pipe and its clamps in two coatings of All. enamel based primer as directed by Engineer-in-Charge. Primer coat over new steel and other metallic surface with red oxide/zinc chromite paint complete with supply of material Labour etc. including preparation of surface.

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per specification. Frequency Meter

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per specification. Aluminium bus bar strips with PVC sleeves

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per specification. LED lamps

Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828 MCCB with Breaking Capacity 25 KA at 415 V Current Rating -25 to100 Amps & 70% -100% adjustable

Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828 MCCB with Breaking Capacity 25 KA at 415 V Current Rating -125 Amps & 70% -100% adjustable

Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828 MCCB with Breaking Capacity 25 KA at 415 V Current Rating -160 Amps & 70% -100% adjustable

Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828 MCCB with Breaking Capacity 25 KA at 415 V Current Rating -200 Amps & 70% -100% adjustable

Supply, Installition of Capacitor Panel 75 KVAr with MCB contactor, capacitor of different size and including all.

Point Wiring in surface rigid P.V.C. conduit system with Flush type Accessories. Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. conduit (MMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- Light Point/Fan Points. a) Short point

Point Wiring in surface rigid P.V.C. conduit system with Flush type Accessories. Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. conduit (MMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- Light Point/Fan Points. a) Long point

Circuit Wiring Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. conduit (MMS) of ISI marked suitable size including painting etc. as required as per specification a) 2x2.5 Sq.mm.

POWER WIRING IN SURFACE RIGID P.V.C.CONDUIT (HEAVY DUTY) SYSTEM WITH MODULAR ACCESSORIES Point wiring including metallic switch box, sheet, for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C.Conduit (MMS) ISI Marked of suitable size including painting etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for :- Short Point

POWER WIRING IN SURFACE RIGID P.V.C.CONDUIT (HEAVY DUTY) SYSTEM WITH MODULAR ACCESSORIES Point wiring including metallic switch box, sheet, for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C.Conduit (MMS) ISI Marked of suitable size including painting etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for :- Medium Point

POWER WIRING IN SURFACE RIGID P.V.C.CONDUIT (HEAVY DUTY) SYSTEM WITH MODULAR ACCESSORIES Point wiring including metallic switch box, sheet, for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C.Conduit (MMS) ISI Marked of suitable size including painting etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for :- Long Point

32 mm dia ISI marked, PVC conduit

Supplying,Fixing and Testing of Flourescent Tube rod T-5 ISI marked of approved make as required as per specification 28 watt T-5

Supplying and fixing down rod of MS pipe for ceiling fan including threading, painting, making holes etc. as required complete :-

Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete as required confirming to IS :374/1979 with upto date ammendments. Ceiling Fan (Energy Saver 60 W)-1400 mm Sweep

Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished and as required. 450mm sweep 900 RPM

Mechanical Work

Baling Machine Including Supply, Installation and Commissioning.

Shredder Machine for plastic Including Supply, Installation and Commissioning.

Shredder Machine for Paper and Cloth Including Supply, Installation and Commissioning.

Fatka Machine Including Supply, Installation and Commissioning.

Aglo Machine Including Supply, Installation and Commissioning.

Gatta Machine Including Supply, Installation and Commissioning.

Mixture Including Supply, Installation and Commissioning.

Press Machine Including Supply, Installation and Commissioning.

Cutter Machine Including Supply, Installation and Commissioning.