Improvement to various staff amenities like water supply arrangement of A, B & C blocks at railway colony Amritsar in the section of SSE/W/WS/ASR under ADEN- I/ASR

Item Breakup - A-CPWD DSR 2021-Ver-2

pattern. 16.91.2 80 mm thick C.C. paver block of M-30 grade Sqm 180 1011.2 182016 3 with approved color design and pattern. Total 697349.50 Item- 14 CODE-17 SANITARY INSTALLATIONS S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 6 5540.55 33243.3 1 seat and lid 17.7B Providing and fixing wash basin with C.I. Each 15 1404 21060 brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and 2 making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 17.8 Providing and fixing white vitreous china Each 6 1500.05 9000.3 3 pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 4 17.10.2.1 610x510 mm bowl depth 200 mm Each 6 4274.4 25646.4 Providing and fixing white vitreous china water 17.13 closet squatting pan (Indian type) : 5 17.13.2 Orissa pattern W.C. pan of size 580x440 mm Each 20 2758.2 55164 Providing and fixing solid plastic seat with lid 17.20 for pedestal type W.C. pan complete : 6 17.20.1 White solid plastic seat with lid Each 12 586.55 7038.6 17.23 Providing and fixing white vitreous china flat Each 10 1382.3 13823 back or wall corner type lipped front urinal 7 basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 17.31 Providing and fixing 600x450 mm beveled edge Each 20 1411.15 28223 mirror of superior glass (of approved quality) 8 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.35 Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia 9 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 Metre 30 1018.05 30541.5 Providing and fixing bend of required degree 17.38 with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.38.1 100 mm dia 10 17.38.1.1 Sand cast iron S&S as per IS - 1729 Each 21 530.7 11144.7 Providing and fixing plain bend of required 17.39 degree. 17.39.1 100 mm dia 11 17.39.1.1 Sand cast iron S&S as per IS - 1729 Each 15 412.95 6194.25 Providing and fixing single equal plain junction 17.44 of required degree : 17.44.1 100x100x100 mm 12 17.44.1.1 Sand cast iron S&S as per IS - 1729 Each 9 580.2 5221.8 Providing and fixing shielded coupling for 17.57A Hubless centrifugally cast iron pipe FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing lead caulked joints to sand cast 17.58 iron/centrifugally cast (spun) iron pipes and fittings of diameter : 13 17.58.1 100 mm Each 18 549.65 9893.7 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 Each 12 600.35 7204.2 14 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 17.74 Providing and fixing PTMT shelf 440 mm long, Each 6 607.05 3642.3 124 mm width and 36 mm height of approved 15 quality and colour, weighing not less than 300 gms. Total 267041.05 Item- 15 CODE-18 WATER SUPPLY S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.1S PE-AL-PE COMPOSITE PRESSURE PIPE Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degrees celsius, including 18.1 all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in- charge.-INTERNAL WORK - EXPOSED ON WALL 1 18.1.1 1216 (16 mm OD) pipe Metre 40 294.55 11782 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including 18.4 all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in- Charge. -Internal Exposed on walls 2 18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 200 316.1 63220 3 18.4.3 PN - 16 Pipe, 32mm OD (SDR-7.4) Metre 150 358.9 53835 4 18.4.5 PN - 10 Pipe, 50mm OD (SDR-11) Metre 210 666.65 139996.5 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene 18.5 random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. -Concealed work,including cutting chases and making good the wall etc. 5 18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 190 501.6 95304 6 18.5.3 PN - 16 Pipe, 32mm OD (SDR-7.4) Metre 140 542.1 75894 FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal 18.6 stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. -External work 7 18.6.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 150.05 213.9 32095.7 8 18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4) Metre 60 268.2 16092 9 18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) Metre 230 568.6 130778 10 18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11) Metre 350 654.65 229127.5 11 18.6.8 PN - 10 Pipe, 90 mm OD (SDR-11) Metre 310 1223.9 379409 18.6A Providing and fixing PPR Unions 12 18.6A.2 PPR Union 25mm Each 60 362.65 21759 13 18.6A.3 PPR Union 32mm Each 38 416.15 15813.7 14 18.6A.5 PPR Union 50mm Each 20 764.05 15281 15 18.6A.6 PPR Union 63mm Each 18 951.35 17124.3 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing 18.7 the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 16 18.7.3 25 mm nominal dia Pipes Metre 150 408.55 61282.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 17 18.8.1 15 mm nominal dia Pipes Metre 250 441.15 110287.5 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making 18.10 good the walls etc.-Internal work - Exposed on wall 18 18.10.3 25 mm dia nominal bore Metre 250 491.2 122800 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the 18.11 walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 19 18.11.1 15 mm dia nominal bore Metre 140 485.2 67928 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 20 18.12.6 50 mm dia nominal bore Metre 136 654.2 88971.2 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 21 18.13.1 25 to 40 mm nominal bore Each 20 757.1 15142 18.15S BRASS FITTINGS FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 22 18.17.4 50 mm nominal bore Each 15 878.25 13173.75 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 23 18.18.1 15 mm nominal bore Each 50 348.85 17442.5 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 24 18.21.2.1 15 mm nominal bore Each 32 85.2 2726.4 Providing and fixing C.P. brass shower rose with 18.22 15 or 20 mm inlet : 25 18.22.1 100 mm diameter Each 20 166.35 3327 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing G.I. Union in G.I. pipe 18.46 including cutting and threading the pipe and making long screws etc. complete (New work) : 26 18.46.1 15 mm nominal bore Each 30 262.3 7869 27 18.46.3 25 mm nominal bore Each 24 369.35 8864.4 28 18.46.6 50 mm nominal bore Each 6 706.7 4240.2 18.48 Providing and placing on terrace (at all floor Litre 20000 9.7 194000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 29 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 30 18.49.1 15 mm nominal bore Each 36 434.2 15631.2 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 31 18.53.1 15mm nominal bore Each 40 500.35 20014 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.1 15mm nominal bore, 86 mm long, weighing not Each 72 109.85 7909.2 32 less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, weighing Each 32 180.8 5785.6 33 not less than 110 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 34 18.58.1.1 100 mm nominal dia Each 4 33.2 132.8 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.63 Providing and fixing PTMT angle stop cock 15 Each 40 136.6 5464 35 mm nominal bore, weighing not less than 85 gms Total 2070502.95 Item- 16 CODE-19 DRAINAGE S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 19.4 with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with 19.6 stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1 19.6.3 250 mm dia. R.C.C. pipe Metre 550 811.15 446132.5 2 19.6.4 300 mm dia. R.C.C. pipe Metre 600 902.05 541230 3 19.6.5 450 mm dia. R.C.C. pipe Metre 90 1481.55 133339.5 Total 1120702.00 Item- 17 CODE-21 ALUMINIUM WORK S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 130 433.95 56413.5 1 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.1.2 Powder coated aluminium (minimum thickness Kg 150 466.3 69945 2 of powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in 21.2 aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 15 965.1 14476.5 3 lamination on one side and balancing lamination on other side Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 10 1325.55 13255.5 4 (weight not less than 12.50 kg/sqm) Total 154090.50 Item- 18 CODE-22 WATER PROOFING S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY 22.6 Providing and laying water proofing treatment Sqm 5000 585.55 2927750 on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of 1 cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 22.14 Grading roof for water proofing treatment with 2 22.14.3 Cement mortar 1:4 (1cement : 4 coarse sand) cum 5 13378.15 66890.75 Total 2994640.75

Item Breakup - B-NS ITEMs

NS-1) Providing,Erecting andfixing in position Metre 160mm outerdia UPVC rain water/sewer pipes(class III) conforming to IS-4985/1985 to with stand a testpressure of 6Kg/cm2 includingthe cost of elbows, socket,bends of required degree andnecessary fittings i.e. M.S.clamps, nut bolts etc.whereverrequired including cutting and including solvent cement forjointing with all labour andmaterial as a complete job.(Sample of PVC pipe will be gotapproved from Engineer incharge before fixing.) Total 89852.90