SPECIAL REPAIR TO AJAYMERU DAD RESIDENTIAL COLONY UNDER GE (SOUTH) JAIPUR MIL STN JAIPUR

Amount

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and shade complete all as specified and as directed.

M&L for newly plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of old decorated surfaces of (plastered or unplastered) including cornices pilasters and other wall features by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of oil bound distemper white or tinted including filling of any minor hole/depression with wall care putty etc complete all as specified and as directed.

M&L for preparing newly plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and as directed.

M&L 2 mm thick wall care putty on the existing decorated/undecorated surfaces of wall/ceiling to make the surface even and smooth complete all as specified and directed.

M&L for prepartion of old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synethic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surfaces over 10cm width or girth of any description and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of wall, edges, facia & projection etc and applying two coat of plastic emulsion paint of approved shade complete all as specified and as directed.

M&L for preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features and applying two coats of weather based paint of approved shade over and incl 1mm thick wall care putty including scaffolding arrangement, trestles, ladders etc and cleaning of furniture and floors , doors/ windows upto two or three stories complete all as specified and as directed. Make should be ASIAN and paint to be prepared by machines only and can be of different shades. Note :- 1.The paint shall be applied by rollers and other finishing tools to ensure smooth surface and consultaion with experts of ASIAN paints will also be taken wherever necessary. 2. Painting shall be done by experts or by Asian paints experts.

All as per Ser item No 10 above but over newly plastered surfaces complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc(in small patches and different location also) all as directed by Engineer-in-Charge.

M&L for rendering 15mm thick in cement mortar (1:4) on brick masonry /concrete surfaces of walls and finished fair & even(in small patches and different locations) complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:6) on brick masonry /concrete surfaces of walls and finished fair & even(in small patches and different locations) complete all as spcified and as directed.

M&L for rendering 10mm thick in cement mortar (1:3) on concrete surfaces and finished fair & even on ceiling(in small patches and different locations) complete all as specified and as directed.

M & L brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition of old brick work complete all as specified and as directed.

Taking down door chowkhat or frames of any description (Wooden/steel) with shutters (Without taking off shutters from frame) area exc 1.50 Sqm but n exc 4.00 sqm each complete all as specified and as directed.

Taking down door chowkhat or frames of any description (wooden or steel) with shutters (Without taking off shutters from frame) area n. exc 1.50 Sqm each complete all as specfied and as directed.

M&L powder Coated (minimum thickness of powder coating 50 micron)Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. stainless steel screws, all complete including making good disturbed portion with the cement mortar (1:4) or providing PCC 1:2:4 type B-0 in sill of opening complete all as specified and as directed.

M&L Aluminium powder coated (minimum thickness of powder coating 50 micron) door/window shutter openable/ sliding type with aluminium section weighing 0.35 Kg/ Mtr including necessary joining, cleats, glazing clips, rubber packing aluminium powder coated snap beading, screws, handle & tower bolts and wire mesh mosqito proofing etc complete all as specified and as directed. Note: Rate shall be inclusive of 4.8mm thick plain sheet for glazing etc.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including removal of old existing roof treatement if any and removal of rubbish outside from MD land complete all as specified and as directed.

M&L TypeB0 1:2:4 (12.5mm graded stone aggregate) for providing, cement concrete as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including formwork complete all as specified and as directed

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface including washing and rubbing down with water and laying 25 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement over the existing slope of roof with WPC as per manufacturer instruction complete all as specified and as directed.

M&L for Water Proof treatment to RCC Roof comprises the following complete all as specified and as directed by Engr-in-Charge :- (a) Applying High build elastomeric waterproofing coating based on aliphatic polyurethane, cold applied with spray/brush applicatiion, membrane with an elongation of 350% and crack bridging abillity of 2mm as per ASTM D 412. The system including final base preparation, single coat of single component PU based primer and applying Berger HS Elastoseal or equivalent brand of other manufacture in two coats to achieve a min thickness 1.2mm etc complete all as per manufacturer specification. Make : SIKA/ASIAN Paints/IWL/Berger Paints.

Disconnecting existing tanks exc 250 ltr not exc 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in the same position complete all as specified and as directed.

S&F Rotational moulded polye?thylene water storage tanks (cylindrical vertical with closed top) of capacity 500 liter hoisted and fixed in position inclding dismantling old unserviceable water tanks and removing to store complete all as specified and as directed.

S & F steel water tubes, 15mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete all as specified and as directed.

Taking down steel tubing of 15 mm bore and connections and refixing the same complete all as specified and as directed.

S & F steel water tubes, 20mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete all as specified and as directed.

Taking down steel tubing of 20 mm bore and connections and refixing the same complete all as specified and as directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore..including taking down of existing pipe .

S&F UPVC (SWR) bend of any radius of 110mm bore including taking down of existing pipe complete all as specified and as directed.

S&F UPVC (SWR) bend provided with access door of any radius of 110mm bore complete all as specified and as directed.

S&F UPVC ( SWR ) single junction (single ' T ' ) equal or unequal provided with access door of 110mm bore complete all as specified and as directed.

M & L for applying bond coat of epoxy bonding agent & CM in (1:1) ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM (1:3) including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement or as per manufacturer instruction (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hrs as required.(iv) Keep the surfaces moist using water fog for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height one storey complete all as specified and directed by Engineer-in-Charge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika as directed by Engineer-in-Charge

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, shelves, old RCC water tank and similar suspended work and removing debris outside MD land complete all as directed by E-in-charge.

NAGHAR ENTERPRISES

PUSHPA G ENTERPRISES

S.R.Enterprises

Shree Karni Electrovision

MSR INFRATECH

UNIVERSAL INFRAPROJECT PVT LTD