PROVN OF BOUNDARY WALL AT CERTAIN PLACES AT AF STN UTARLAI

Amount

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth; for foundation etc and getting out in any type soil complete all as specified.

M&L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggt) as in foundations, filling & mass concrete complete all as specified.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified.

Removing excavated material, n. exc 50 M and depositing where directed at a level n. exc 1.5M above the starting point complete all as specified and directed by Engineer-in-charge.

M & L plain cement concrete type B-0 1:2:4 (Using 12.5mm graded agg) as in coping complete all as specified and directed.

M & L plain cement concrete type B1 1:2:4 (Using 20mm graded agg) as in for fixing angle iron complete all as specified and directed

M&L rendering 15 mm thick, in CM (1:4) on fair face of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces on walls etc & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

S&F Mild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165.

M & L for preparation of new or previously untreated steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat red oxide of primer complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to GDE Fe290-0 E165 Gde.

M&L RCC (Nominal Mix) 1:2:4 type B1 (using 20 mm graded stone aggregate) as in footing, foundation or bases of columns all as directed.

M&L RCC (Nominal Mix)1:2:4 type B1 (using 20 mm graded stone aggregate) as in columns all as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns all as directed.

Formwork to sides of columns all as directed.

M/s Malinath Electricals

M/S HARIOM CONSTRUCTION COMPANY

M/S Tanisha Traders

S.K. INFRASTRUCTURE