ADDN ALTN TO ELECTRIC SUPPLY SYSTEM BY CONVERSION OF OVER HEAD LINE INTO UG CABLE AND CONNECTED WORKS AT OFFICER SMD ACCN AREA MILIT GIRINAGAR PUNE

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified & directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each complete all as specified & directed..

Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified & directed..

Supply & Laying 75 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified & directed..

Supply & laying including testing LT UG cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of following cross-sectional area complete all as specified & directed.

(a) 3.5 Core 120 Sqmm

(b) 3.5 Core 95 Sqmm

(c) 3.5 core 70 Sqmm

(d) 3.5 Core 35 Sqmm

(e) 3.5 Core 25 Sqmm

(f) 4.0 Core 16 Sqmm

(g) 4 core 10 sqmm Note for BOQ item No 6.00 above :- 1. Cost of lugs and glands is deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. 2. Earth work such excavation, refilling, etc. shall be measured separately under relevant items of this BOQ.

Dismantling ACSR condutor of any size and taking for schedule of credit measurement all as specified & directed.

Supply & lay GI pipe 40 mm dia light grade with & including necessary fittings laid in trenches/ floor/ on walls etc complete all as specified and directed .

Supply & lay GI pipe 50 mm dia light grade with & including necessary fittings laid in trecnches/ floor/ on walls etc complete all as specified and directed .

Supply & lay GI pipe 80 mm dia light grade with & including necessary fittings laid in trenches/ floor/ on walls etc complete all as specified and directed .

S&f in replacement of 32mm dia light grade GI pipe bracket 1.2 mtr long bend to shape including clamps as per site requirement made out of 50x6 mm flat iran duly painted with two coats of aluminium paint over a coat of red oxide primer, suitable size nuts bolts and washers etc.complete all as specified and directed.

Supply and fix PVC Rigid conduit of size 20 mm external dia fixed on pole duly clamped with MS clamps in Each 1 mtr gap incl nuts, bolts & washers (terminal and junction) and all other accessories such as tees, bends, mouth tube ends etc complete all as specified & directed.

Material and labour for dismantling of old steel tubular pole and suppy, errecting in truly vertical position steel tubular swaged pole 9.0 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP 22, including painting with anti corrosive paint internally complete and externally up to planting depth, alternative white & black strips of 30 cm width upto 1.5 mtr above ground level all as required at site and directed.

Supply & fix in replacement of 3 core of 1.5 sqmm PVC insulated copper cable for connection of street light with existing point all as specified and directed.

M & L for plain cement concrete 1 : 3 : 6 type C1 (using 20 mm graded stone aggregate) as platform mass concrete, coping to pole, for embedding stay rods including necessary form work and applying two coats of cement based paint on coping, platform, etc, whereever required all as directed.

Demolition of existing old PCC and M &L Plain cement concrete 1 : 4 : 8 type C1 (using 40 mm graded stone aggregate) as platform mass concrete, foundation of poles all as specified including necessary form work whereever required all as directed.

S & Fix in replacement outdoor type FRP junction box light weight suitable for pole mounting inclduing MCB SP 6 Amps single pole, flat iron clamp duly painted with two coats of aluminium paint over a coat of red oxide primer and GI nut, bolts, washers and necessary connector for loop in loop out cable connection and suitable size galnds, of size 230x170x105mm complete all as specified & directed.

Dismantling the old unserviceable LT Panel Board and Supply Fabricate, install, connect, test and commission Indoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 2 mm thick CRCA sheet epoxy powder coating for like all surfaces in and out and with gasket and suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:- Note for BOQ item No 18.00 to 25.00 : (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (if required) with suitable glands for existing/ new cables. (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet. (iv) All MCCBs fixed with extended rotary handles ROM. (v) Adequate space and independent compartment given to MCCBs & switch gears as directed. (vi) Adequate space given to Each MCBs for easy cable connection and working. (vii) Proper marking/ stickering to be done for showing feeders/OEM name.

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 600 amps with chamber

c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 400A with breaking capacity 50 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 250 A with breaking capacity 36 KA - 02 Nos

f) MCCB 4 Pole, 415 V,adjustable type, 100 A with breaking capacity 16 KA - 04 Nos

g) MCCB 4 Pole, 415 V, adjustable type, 63 A with breaking capacity 16 KA - 01 Nos

h) Timer switch with contactor

j) suitable cable gland for incoming and outgoing cable

Dismantling the old unserviceable LT Panel Board and Supply Fabricate, install, connect, test and commission outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3.15 mm thick CRCA sheet for like all over body, CRCA powder coated all over the all surfaces only including suitable angle iron/ flat iron frame work/ supports bottom 60x60x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 400 amps with chamber

c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 250A with breaking capacity 36 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA - 07 Nos

f) MCB 4 Pole, 415 V,adjustable type,40A - 02 Nos

g) suitable cable gland for incoming and outgoing cable

Supply Fabricate, install, connect, test and commission outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for like all over body, CRCA powder coated all over the all surfaces only including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 400 amps with chamber

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 200A with breaking capacity 36 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 160 A with breaking capacity 25 KA - 01 Nos

f) MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA - 05 Nos

g) MCB 4 Pole, 415 V,adjustable type,40A - 01 Nos

h) suitable cable gland for incoming and outgoing cable

Supply Fabricate, install, connect, test and commission outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for like all over body, CRCA powder coated all over the all surfaces only including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 300 amps with chamber

c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 160A with breaking capacity 36 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA - 07 Nos

f) suitable cable gland for incoming and outgoing cable

Supply Fabricate, install, connect, test and commission outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for like all over body, CRCA powder coated all over the all surfaces only including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 200 amps with chamber

c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 100 A with breaking capacity 25 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA - 02 Nos

f) MCB 4 Pole, 415 V,adjustable type,40A - 02 Nos

g) suitable cable gland for incoming and outgoing cable

Supply Fabricate, install, connect, test and commission outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for like all over body, CRCA powder coated all over the all surfaces only including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 400 amps with chamber

c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 200A with breaking capacity 36 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA - 6 Nos

f) MCB 4 Pole, 415 V,adjustable type,40A - 01 Nos

g) Timer switch with contactor

h) suitable cable gland for incoming and outgoing cable

Supply Fabricate, install, connect, test and commission outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for like all over body, CRCA powder coated all over the all surfaces only including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 500 amps with chamber

c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 250 A with breaking capacity 36 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA - 7 Nos

f) MCB 4 Pole, 415 V,adjustable type,40A - 01 Nos

g) Timer switch with contactor

h) suitable cable gland for incoming and outgoing cable

Supply Fabricate, install, connect, test and commission outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for like all over body, CRCA powder coated all over the all surfaces only including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-

a) LED/Neon indicator bulb in RYB Colour - 1 Set.

b) 4 No aluminium Bus bar 300 amps with chamber

c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT

d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 160A with breaking capacity 36 KA - 01 Nos

Out going:

e) MCCB 4 Pole, 415 V,adjustable type, 63 A with breaking capacity 16 KA - 03 Nos

f) MCB 4 Pole, 415 V,adjustable type,40A - 01 Nos

g) Timer switch with contactor

h) suitable cable gland for incoming and outgoing cable

Material and labour for cutting of bituminious raod / floor for laying of pipe/ cables not exceeding 30 cm wide and not exceeding 60 cm deep including refilling/ with material and, watering well ramming/ compacting and making good with PCC 1;2;4, type B-1, 100mm thick complete all as specified and directed by Engr-in-charge

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC conduit with its accessories all as specified and directed by Engr-in -charge for the following:-

(a) 4 x 6 sq mm and 1 x 6 sq mm as earth wire

Supply & fix heat shrinkable jointing kit for 1.1 KV grade cable for straight through joint/ end joint kit complete with jointing material and accessories suitable for 2/3.5/4 core XLPE / PVC armoured AIuminium Conductor cable of following size . (a) 16 sqmm to 50 sqmm

(b) 70 sqmm to 120 sq mm

M&L for earthing with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25M deep below ground level with top edge of the plate not less than 1.5M below normal ground level connected to galvanised strip 32x6mm by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earthing test point including excavation/ earth work in any strata removal of surplus earth, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab with 40mm dia light grade GI protection pipe and 20mm dia light grade GI pipe for watering all as specified and directed by Eng-in-charge. Note : Cost of earth lead & protection pipe upto 7.5 m shall deemed to be included in the quoted rate.

KESARI AND SONS

sagar construction

Mehta and Co.

SOURABH ENGINEERS

Sunhari Electricals

M/s ASPIRE ENGINEERING ENTERPRISES

Chaulya Enterprises

CHAITANYA WINDWELL

Mahindra Electric Stores

Prasur Electricals & Engineering Co.