Renovation / Addition Alteration of Sher I Kashmir Indoor Sports Complex, Srinagar by way of Renovation of bathrooms ladies and gents with change rooms/ disposal system, Renovation of 4 No washrooms with 2 No disposal system and sanitary fittings inc

Amount

Bathrooms/ Change Rooms Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in fundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out at the excavated soil and disposal of the surplus excavated soil as directed within a lead of 50m.All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidatind each deposited layer by ramming, watering lead upto 50m and lift upto 1.5m.

Providing and laying stone soling tightly hand packed under foundations footing etc. including carriages of materials from source to site of work complete in all respects.

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering. All works upto plinth level 1:4:8 ( 1cement: 4Coarse sand: 8 graded stone agg. 40mm nominal size) crusshed Incl all carriages complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor five level, excluding the cost of centering, shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). Incl all carriages complete.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth/ above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Centering and shuttering including strutting, propping etc. and removalof form for all heights : in Suspended floors, roofs, landings, balconies and access plateform

walls,strutts,retaing walls etc

Edges of slabs,beams etc.under 20 cm wide.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Polygonal /Random rubble masonry with hard stone of approved quarry in foundation and plinth including cost of bond stones. (Dry masonry.) Incl all carriages complete.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) Incl all carriages complete.

Demolishing brick work manually /by mechanical means including stacking of serviceable materials and disposal of unserviciable material as directed by Engineer Incharge complete (in cement mortar)

Brick work with FPS bricks of class designation 75 in 1:6 ( cement : 6 coarse Sand) upto upto floor 5 level including all carriages etc. complete:

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand)

Sanitary Fittings and disposal system

Providing and fixing water Closet (Indian type W.C. Pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china wall hung W.C. pan of size 580 x 440 mm (Hindware, Jaquar or Cera or eq. Make)

Providing and fixing wash basin with C.I. brackets , 15 mm C.P brass Pillar taps,32 mm C.P brass waste of standard pattern, including painting of fitting and brackets cutting and making good the walls where ever required. White ,Vitereous china Wash basin size 630x450 mm with a pair of 15 mm C.P Brass pillar taps.(Hindware, Jaquar or Cera or eq. Make)

Providing and fixing white ,vitreous china pedestal for wash basin completely recessad at the back for reception of pipes and fittings .

Providing and fixing 32 mm dia C.P. Brass Trap

Providing and fixing 32 mm dia C.P. Brass union

Providing & fixing White Vitreous China Large flat back half stall Urinal basin of 580 mm x380 mm x350 mm with flat white PVC automatic flushing Cistern ,of approved make with fittings ,C.I/M.S brackets,standard size of C.P brass flush pipe ,Spreaders with unions and clamps complete.(All in C.P.Brass) with waste fittings as per IS: 2556, C.I trap with out let grating and other couplings in C.P Brass including painting of fittings and brackets,Cuttings and making good the walls and Floors wherever required Single half stall urinal with 5 litres white PVC automatic Flushing Cistern of approved quality Jaquar, Hindware, Cera or eq.

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket at the same materials with /Snap fittings of approved quality colour and make. Weighing not less than 105 gms

Providing & fixing of Geyser of 25 liter capacity white colour of approved brand .Venus/Khaitan/Racold complete with necessary geyser bolts/fire Bolts. complete in all respects as per the directions engineer in charge .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Circular tank)

Providing and fixing ist quality ceramic glazed Floor tiles of confirming to IS: 13755 of min. thickness 8mm of approved make like NITCO, Orient, Somany, Kajaria or equivalent make of specified shades except Burgundy bottle green black of any size as approved by consultant over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kgs per Sq.m including pointing in white cement mixed with pigment of matching shade complete (300 mm x 300 mm ) size (Heavey Qality)

Providing and fixing ist quality ceramic glazed tiles of confirming to IS: 13753 of min. thickness 8mm of approved make like NITCO, Orient, Somany, Kajaria or equivalent make of specified shades except Burgundy bottle green black of any size as approved by consultant over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kgs per Sq.m including pointing in white cement mixed with pigment of matching shade complete in all respects.(300x450 mm sizes) (Heavey Qality)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per direction of Engineer in Charge. (Concealed Work including cutting chases and making good the walls etc.) A) 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including allCPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling &testing of joints complete as per direction of Engineer in Charge (External Work ) 25 mm nominal outer dia Pipes

Making connection of medium grade G.I distribution branch with G.I main of the following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete in all respects. 25 to 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 20 mm nominal bore

25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

20 mm nominal bore

25mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore Jaquar, Hindware, Cera or eq.

Providing and fixing C.P. brass stop cock (concealed) of standarddesign and of approved make conforming to IS:8931 .15 mm nominal bore Jaquar, Hindware, Cera or eq.

Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 (15 mm nominal bore)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing C.P. Brass Basin mixer/sink mixer 15mm dia aquar, Hindware, Cera or eq.

Health faucet 15mm dia

Grating 100 mm dia anti cockroach type

Providing and fixing G.I. Union in existing G.I.pipe line, cutting andthreading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :

15 mm nominal bore

20 mm nominal bore

Reducer 15mmx20 mm

Tanki Nipple 20 mm dia 300 mm long with nuts etc.as per site requirment

Providing and fixing 600 mm x 450 bevelled edge mirror of ,5.5 mm thick of float glass ( of approved quality) Complete with 6 mm tick hard board ground fixed to wooden cleats with CP brass screws and washers complete.

Providing and fixing 600 x 120 x 5 mm glass shelf with edges round or supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing and fixing toilet paper holder complete in all respects.( C.P.Brass )

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket at the same materials with /Snap fittings of approved quality colour and make. Weighing not less than 105 gms

Providing and fixing 110 mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx110 mm dia PVC plain branches (Single Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx5mm dia PVC plain branches (Single unequal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx 5 mmx5mm dia PVC branches double unequal Junction of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC offset including jointing and cost of spun yarn and sand etc. Complete. With 10 cm projections

With 15cm projections

Providing and fixing 110 mm PVC plain bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC collar ( Loose socket) ,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing brackets comparising of aluminium painted steel clips and cast iron base for 75 mm PVC pipes including cost of screws etc. and drilling of holes and making good the walls, including sand etc. Complete.

Providing and fixing 75 mm x75 mmx75 mm dia PVC plain branches (Single Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm x75 mmx75 mm dia PVC plain branches (Double Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm PVC offset including jointing and cost of spun yarn and sand etc. Complete. With 10cm projections

With 15 cm projections

Providing and fixing 8 cm dia. PVC plain bend of the required degree including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 8 cm dia PVC bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75mm PVC collar ( Loose socket) ,including jointing and cost of spun yarn and sand etc. Complete.

Demolishing of old deamaged tile work on walls/floors including disposal of the same as directed.

Renovation of 4 No Washrooms with two disposal System Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in fundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out at the excavated soil and disposal of the surplus excavated soil as directed within a lead of 50m.All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidatind each deposited layer by ramming, watering lead upto 50m and lift upto 1.5m. Or as directed.

Providing and laying stone soling tightly hand packed under foundations footing etc. including carriages of materials from source to site of work complete in all respects.

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering. All works upto plinth level 1:4:8 ( 1cement: 4Coarse sand: 8 graded stone agg. 40mm nominal size) crusshed Incl all carriages complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor five level, excluding the cost of centering, shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). Incl all carriages complete.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth/ above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Centering and shuttering including strutting, propping etc. and removal of form for all heights : A) Suspended floors, roofs, landings, balconies and access plateform

walls,strutts,retaing walls etc

Edges of slabs,beams etc.under 20 cm wide.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Polygonal /Random rubble masonry with hard stone of approved quarry in soakge pits, foundation and plinth including cost of bond stones. Including dewatering of trenches if required (Dry masonry.)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Incl all carriages complete.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand)

Providing and fixing water Closet Wall hung (Western type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous china wall hung W.C. pan of size 580 x 440 mm (Hindware, Jaquar, Cera or eq. make)

Providing and fixing wash basin with C.I. brackets , 15 mm C.P brass Pillar taps,32 mm C.P brass waste of standard pattern, including painting of fitting and brackets cutting and making good the walls where ever required. White ,Vitereous china Wash basin size 630x450 mm with a pair of 15 mm C.P Brass pillar taps. (Hindware, Jaquar, Cera or eq. make)

Providing and fixing 32 mm dia C.P. Brass Trap

Providing and fixing 32 mm dia C.P. Brass union

Providing and fixing white ,vitreous china pedestal for wash basin completely recessad at the back for reception of pipes and fittings.(Hindware, Jaquar, Cera or eq. make)

Providing & fixing White Vitreous China Large flat back half stall Urinal basin of 580 mm x380 mm x350 mm with flat white PVC automatic flushing Cistern ,of approved make with fittings ,C.I/M.S brackets,standard size of C.P brass flush pipe ,Spreaders with unions and clamps complete.(All in C.P.Brass) with waste fittings as per IS: 2556, C.I trap with out let grating and other couplings in C.P Brass including painting of fittings and brackets,Cuttings and making good the walls and Floors wherever required Single half stall urinal with 5 litres white PVC automatic Flushing Cistern of approved quality (Hindware, Jaquar, Cera or eq. make)

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket at the same materials with /Snap fittings of approved quality colour and make. Weighing not less than 105 gms

Providing & fixing of Geyser of 25 liter capacity white colour of approved brand .Venus/Khaitan/Racold complete with necessary geyser bolts/fire Bolts. complete in all respects as per the directions engineer in charge .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Circular tank)

Providing and fixing ist quality ceramic glazed Floor tiles of confirming to IS: 13755 of min. thickness 8mm of approved make like NITCO, Orient, Somany, Kajaria or equivalent make of specified shades except Burgundy bottle green black of any size as approved by consultant over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kgs per Sq.m including pointing in white cement mixed with pigment of matching shade complete (300 mm x 300 mm ) size (Heavey Qality)

Providing and fixing ist quality ceramic glazed tiles of confirming to IS: 13753 of min. thickness 8mm of approved make like NITCO, Orient, Somany, Kajaria or equivalent make of specified shades except Burgundy bottle green black of any size as approved by consultant over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kgs per Sq.m including pointing in white cement mixed with pigment of matching shade complete in all respects.(300x450 mm sizes)(Heavey Qality)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per direction of Engineer in Charge. (Concealed Work including cutting chases and making good the walls etc.) 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including allCPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling &testing of joints complete as per direction of Engineer in Charge (External Work ) 25 mm nominal outer dia Pipes

Making connection of medium grade G.I distribution branch with G.I main of the following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete in all respects. 25 to 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 20 mm nominal bore

25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standarddesign and of approved make conforming to IS:8931 .15 mm nominal bore Jaquar, Hindware, Cera or eq.

Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 (15 mm nominal bore) (Hindware, Jaquar, Cera or eq. make)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing/fixing of Basin mixer/sink mixer 15mm dia (Hindware, Jaquar, Cera or eq. make)

P/F of Health faucet 15mm dia (Hindware, Jaquar Cera or eq. make)

Grating 100 mm dia anti cockroach type

Providing and fixing G.I. Union in existing G.I.pipe line, cutting andthreading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore

20 mm nominal bore

Reducer 15mmx20 mm

Tanki Nipple 20 mm dia 300 mm long with nuts etc.as per site requirment

Providing and fixing 600 mm x 450 bevelled edge mirror of ,5.5 mm thick of float glass ( of approved quality) Complete with 6 mm tick hard board ground fixed to wooden cleats with CP brass screws and washers complete.

Providing and fixing 600 x 120 x 5 mm glass shelf with edges round or supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing and fixing toilet paper holder complete in all respects.( C.P.Brass )

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket at the same materials with /Snap fittings of approved quality colour and make. Weighing not less than 105 gms

Providing and fixing 110 mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx110 mm dia PVC plain branches (Single Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx110 mm dia PVC plain branches (Double Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx5mm dia PVC plain branches (Single unequal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx 5 mmx5mm dia PVC branches double unequal Junction of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC offset including jointing and cost of spun yarn and sand etc. Complete. With 10 cm projections

With 15cm projections

Providing and fixing 110 mm PVC plain bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC collar ( Loose socket) ,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing brackets comparising of aluminium painted steel clips and cast iron base for 75 mm PVC pipes including cost of screws etc. and drilling of holes and making good the walls, including sand etc. Complete.

Providing and fixing 75 mm x75 mmx75 mm dia PVC plain branches (Single Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm x75 mmx75 mm dia PVC plain branches (Double Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm PVC offset including jointing and cost of spun yarn and sand etc. Complete. With 10cm projections

With 15 cm projections

Providing and fixing 8 cm dia. PVC plain bend of the required degree including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 8 cm dia PVC bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75mm PVC collar ( Loose socket) ,including jointing and cost of spun yarn and sand etc. Complete.

Demolishing of old deamaged tile work on walls/floors including disposal of the same as directed.

Sanitary Fittings and Disposal System to Guard Room Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in fundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out at the excavated soil and disposal of the surplus excavated soil as directed within a lead of 50m.All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidatind each deposited layer by ramming, watering lead upto 50m and lift upto 1.5m.

Providing and laying stone soling tightly hand packed under foundations footing etc. including carriages of materials from source to site of work complete in all respects.

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering. All works upto plinth level 1:4:8 ( 1cement: 4Coarse sand: 8 graded stone agg. 40mm nominal size) crusshed Incl all carriages complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor five level, excluding the cost of centering, shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth/ above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Centering and shuttering including strutting, propping etc. and removalof form for all heights : A) Suspended floors, roofs, landings, balconies and access plateform

Edges of slabs,beams etc.under 20 cm wide.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate incl. all carriages complete.

Polygonal /Random rubble masonry with hard stone of approved quarry in sokage pits foundation and plinth including cost of bond stones. (Dry masonry.)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with FPS bricks of class designation 75 in 1:6 ( cement : 6 coarse Sand) upto upto floor 5 level including all carriages etc. complete:

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand)

Providing and fixing water Closet (Indian type W.C. Pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures including fixing white ,vitreous china pedestal for wash basin completely recessad at the back for reception of pipes and fittings . complete, including cutting and making good the walls and floors wherever required: A) White vitreous china W.C. pan of size 580 x 440 mm (Indain Type)

Providing and fixing wash basin with C.I. brackets , 15 mm C.P brass Pillar taps,32 mm C.P brass waste of standard pattern, including painting of fitting and brackets cutting and making good the walls where ever required. A) White ,Vitereous china Wash basin size 630x450 mm with a pair of 15 mm C.P Brass pillar taps.

Providing and fixing 32 mm dia C.P. Brass Trap

Providing and fixing 32 mm dia C.P. Brass union

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket at the same materials with /Snap fittings of approved quality colour and make. Weighing not less than 105 gms

Providing & fixing of Geyser of 25 liter capacity white colour of approved brand .Venus/Khaitan/Racold complete with necessary geyser bolts/fire Bolts. complete in all respects as per the directions engineer in charge .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Circular tank)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per direction of Engineer in Charge. (Concealed Work including cutting chases and making good the walls etc.) A) 15 mm nominal outer dia pipes

20mm dia nominal outer dia pipes

Making connection of medium grade G.I distribution branch with G.I main of the following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete in all respects. 25 to 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 20 mm Nominal Bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

B) 20mm Nominal Bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standarddesign and of approved make conforming to IS:8931 .15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 (15 mm nominal bore)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing/fixing of Basin mixer/sink mixer 15mm dia (Jaquar, Cera, Hindware or eq make)

Health faucet 15mm dia (Jaquar, Cera, Hindware or eq make)

Grating 100 mm dia anti cockroach type

Providing and fixing G.I. Union in existing G.I.pipe line, cutting andthreading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : A) 15mm Nominal Bore

20 mm nominal bore

Reducer 15mmx20 mm

Tanki Nipple 20 mm dia 300 mm long with nuts etc.as per site requirment

Providing and fixing 600 mm x 450 bevelled edge mirror of ,5.5 mm thick of float glass ( of approved quality) Complete with 6 mm tick hard board ground fixed to wooden cleats with CP brass screws and washers complete.

Providing and fixing 600 x 120 x 5 mm glass shelf with edges round or supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket at the same materials with /Snap fittings of approved quality colour and make. Weighing not less than 105 gms

Providing and fixing 110 mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx110 mm dia PVC plain branches (Single Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx110 mm dia PVC plain branches (Double Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx5mm dia PVC plain branches (Single unequal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm x110 mmx 5 mmx5mm dia PVC branches double unequal Junction of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC offset including jointing and cost of spun yarn and sand etc. Complete with 10 Cm Projections

With 15cm projections

Providing and fixing 110 mm PVC plain bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 110 mm PVC collar ( Loose socket) ,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing brackets comparising of aluminium painted steel clips and cast iron base for 75 mm PVC pipes including cost of screws etc. and drilling of holes and making good the walls, including sand etc. Complete.

Providing and fixing 75 mm x75 mmx75 mm dia PVC plain branches (Single Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm x75 mmx75 mm dia PVC plain branches (Double Equal Junction) of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 75 mm PVC offset including jointing and cost of spun yarn and sand etc. Complete. With 10cm projections

With 15cm projections

Providing and fixing 8 cm dia. PVC plain bend of the required degree including jointing and cost of spun yarn and sand etc. Complete.

Providing and fixing 8 cm dia PVC bend of the required degree with acess door inclusive of 3 mm thick bitumastic felt washer and bolts and nuts, complete,including jointing and cost of spun yarn and sand etc. Complete.

M/S WHITE LINECONSTRUCTIONS AND ENGINEERS

MOHAMMAD YOUSUF KHAN

FAYAZ AHMAD AHANGAR