PROVN OF CERTAIN REVENUE AND MINOR WORKS UNDER GE (AWC) MHOW.

Amount

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft,well,cesspit,manhole,pier hole etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out Soft/Loose soil.

Excavating in trenches, n. exc 1.5m wide and n. exc 1.5m in depth for foundation, etc or for shafts , wells, cesspits, manholes, pier holes etc n exc 10 Sq m on plan and n exc 1.5m in depth and getting out in any type of soil.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft,well,cesspit,manhole,pier hole etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out Hard/Dense soil.

Returning, filling in spreading and levelling and well ramming in layers not exc 25cm thick including watering for filling under floor.

M/L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L broken stone hard core of gauge n. exc 63mm deposited, spread and levelled in layers n. exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M/L Moorum/Red Bajri Filling in floors or pavings, laid in layers n. exc 15cm thick, spread, levelled and rammed including watering.

Removal of excavated soil to a distance exc 250m and n. exc 500m and depositing where directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface.complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point.

Removing excavated material exc 100m but not exc. 150m and depositing where directed at a level n exc. 1.5m above the starting point.

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M&L for 150 mm thick Hard core of broken stone/ boulder , broken to gauge n exc 63 mm complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, sub base or levelling coarse of flooring etc complete all as specified and as directed

M&L PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed

Supply only integral water proofing compound complete.

M & L for RCC M- 25 design mix / ( Type BO 1:2: 4 )12.5mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; asement slabs, under-reamed piles and mass concrete

M & L for RCC M- 25 design mix in Columns, pillars,piers,posts and struts using 20 mm crushed stone aggregate complete all as specified and as directed

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping etc complete all as specified and shown on drawings.

M & L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof, floors, slabs supported on walls.

M & L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in Chajjas.

M & L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping to drains complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (Using 40mm stone aggregate) as in post holes all as specified and directed.

M & L Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and setting in mortar 1:6 complete all as directed and specified.

M & L for RCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintel over 1.5m span etc. complete all as specified and directed.

M & L PCC 1:3:6 type C-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. complete all as specified and directed.

M & L PCC 1:3:6 type C-2 using 40 mm graded aggregate as in bed of drain including forming channels complete all as specified and directed.

M&L for Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Providing pre-cast cement concrete B1 type,1;2;4(using 12.50 mm graded aggregrate)set in cement mortar in kerb blocks with plain fair faces including champhers,weathering, throating etc and setting in cement mortar 1;4 complete with joint to match.

Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for Manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L brick work with sub class 'B' old size brick straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and as directed

M & L 40mm thick Damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4 Type B 0 including necessary formwork etc complete all as specified and directed.

M & L applying evenly a coat of blow type bitumen at the rate of 1.50kg per square metre and blinding with clean dry sand @ 0.05 cu.m per sq. m complete all as specified and directed.

M & L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks built in Cement mortar 1:4 complete all as specified and directed.

M & L Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc. section of fillet exc 25 sqcm but not not exceeding 50 sqcm.

M&L modular brick work with fly ash Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cill, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as per direction of GE

Use and waste form work to sides and soffits of floor or roof beams, lintel beam , cantilevers, shelves etc.

Use and waste form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200 mm thick surface of concrete, fair finished complete all as specified and directed.

M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exceeding 10cm but n. exc.20 cm wide Rough finished surfaces of concrete

Formwork to chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges fair finished surface of concrete flat.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete .

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete.

S & F 200 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30mm complete.

S & F 100 mm Hasp and staple, mild steel, wire type, stove enameled black, incudingbolt to hinge plate and fixed with screws in repair complete.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Description same as per item No. 54.00 but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders.

S & F steel work in rectangular/square hollow section pipe as in rafter/purlins and any other situation including special shaped washer etc complete using EWR or inducton butt welded tubes conforming to IS 4923 or IS-1161 grade St-240 complete.

M & L mild steel framed work such as grills , gratings, frame work for wall clading ,door chowkhats etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S & F Joist, channel, angle or tee , square or rectangular, tubler sections, fixed indipendently or as purlin , rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

S & F Expended metal, n exc 4 kg cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples to wood or steel members complete all as directed and specified.

S&F 40mm wide and 5mm thick flat iron fillets for securing chainlink /wiremesh including all necessary drilling, bolting or riveting etc conforming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F mild steet bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but length of bolt exc 15 cm and not exc22.5 cm long dia of neck 10mm.

S & F rolled section as in main and cross beams, hip and rafters, purlins, posts and running rails etc. fixed with or without angle cleat or other connected plates,including all necessary cutting and welding as directed, Grade Fe-410-W Gde E-250 Quality- A . Note:- Fabrication like cutting , welding, bending , or any other nature of work shall be at site or shop including in above rate.

S & F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel, sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L in repair 19/20 mm thick Pre-laminated particle board, interior grade, prelaminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screws teak wood beading all round / exposed faces complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.

M & L 75 mm thick Cement concrete type C-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.

M&L 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base to foot path etc.

M & L 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for flooring complete all as specified and directed.

M & L Cement concrete 25 mm thick type B-1, 1:2:4 (20mm graded aggregate) as in level course.

M & L Cement concrete 50 mm thick type B-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished top surface even smooth with using extra cement.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in floor all as specified.

M&L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 300mmx200mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 350mmx250mm x 6-7 mm / 450mmx350mm x 6-7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:3 complete all as specified and directed.

Dismantling floor, hearth or wall tiling also in patches of any description including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L joint free Non Skid ceramic plain coloured tiles also in patches of any description ay size , any location 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).

M&L vitrified ceramic endura tiles for exterior light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm screed bed in cement mortar 1:4 complete all as specified and directed.

M & L Brushing neat cement slurry with 3.0 kg of cement per sqm.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and pigment laid over dry sand cushioning, filling of joints with sand & compaction using surface vibrator after filling of joints, colour and pattern approved by GE,complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately) .

M & L Machine cut cudappa stone slab 20-25 mm thickover cement scred base laid and jointed with grey cement slury mixed with pigment to match shade of the slab including rubbing and polishing complete all as specified and directed

M & L bullnosing / moulding to exposed edges of stone slabs (any type) and polishing to match the adjoining surfaces complete all as specified and directed.

M & L 10 - 15 mm thick machine cut Kota stone slab in riser steps, skirting, dado etc.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L 12 mm thick rendering in cement mortar 1:6 on brick work or concrete surface of wall finished even and fair complete.

M & L 10 mm thick rendering in cement mortar 1:6 on brick work or concrete surface of wall finished even and fair complete.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface fair finished even and smooth complete. Note : Water proofing compound shall be measured and paid separately as supply only.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick wall Pillar and projection surface even and smooth without using extra cement.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, mixed with water proofing compound, surface fair finished even and smooth complete. Note : Water proofing compound shall be measured and paid separately as supply only.

M&L for 12 mm thick rendering on brick work or concrete surfaces of internal wall in cement mortar 1:6 surface complete all as specified and directed.

M&L for 5 mm thick rendering of ceiling surfaces in cement mortar 1:3 surface complete all as specified and directed.

M & L Screed bed or bedding layer of mortar 15mm th for laying floor finishes Cement plaster 1:4.

M&L three coats of white wash on newly plastered surfaces of wall including preparation of surface complete.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of priming coat (chalk whitening) complete all as specified.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I complete all as specified and directed.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

S & F vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.. Note :- Pillar tape shall be measured as supply only under respective item

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

Supplying, fixing, 20 mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

S & F 10 litre capacity PVC low level valveless, syphonic action type flushing cistern, white, with inlet, ball valve, float and handle includung 32 mm dia PVC pipe for conneting to EWC complete all as specified and directed.

S & F PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

S & F vitreous china Urinal , Half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern,flush pipe) complete all as specified and as directed.

S & F PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S&F 15 mm bore dia cp bib taps, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe .

S & F in repair Gun-metal, globe of gate valve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as specified.

S & F 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S&F pillar tap15 mm dia cast copper alloy, with capstan heads chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S & F 15 mm Stop cock chromium plated with high pressure crutch or butterfly handle screwed with both ends for iron pipe or PVC connection complete all as specified and directed.

S & F 15 mm Bib tap fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 150 mm internal dia of pipe complete all as specified and directed

Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 150 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement kmortar 1:1 complete all as specified and directed.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

Taking up or down existing 15 mm dia steel tubing and connection and removing complete.

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.Make :- Tata, Jindal , Prakash

Supplying, fixing, I repair 75 mm bore PVC(SWR) soil waste and vent pipes single socketed in any length with rubber joints fixed to walls / floors complete all as specified and directed.

S & F Grating doom 100 mm dia of PTMT(Minimum weight 25gms) complete all as specified and directed.

Dismantling of fencing wire mesh any type.

Dismantling posts or struts (wood, steel or RCC ) any section, including taking out embeded portion and making good disturbed ground.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

Supply only 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete.

S & F brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete.

S&F stainless steel plate rack of size 31" x 36"x 10" made of 0.63 mm thick stainless steel sheet including provision of different sizes of plates shelves for cups and saucers etc and hook, fixed to wall at required hight with stainless steel screw and PVC fastener by using drill machine etc complete all as specified and directed.

S & F( in repair) 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

S & F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 63.5mm x 38.1mm x 2mm thick. (ii) Two way track for sliding shutters of cross section 62mm x 30mm x1.5mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium glazing strip of size 18.2 x 16.66mm (Ix) fixing screw for frame with wall per windows- 06 Nos (x) Rubber shock absorber 03 nos per shutter (xi) Necessary fixing clips for middle fixed shutter as approved.

M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly complete all as specified and directed for one light / fan/ bell controlled by one ,one way switch 5/6 Amps.

Description same all as per item No 136.00 here in before but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch.

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed.

Supply and fixing modular metal flush box 3 module complete all as specified and as directed.

Supply and fixing modular metal flush box 8 module complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed.

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V .

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch socket combination modular type multipurposes 6/16 A, 1 module complete all as specified and directed.

S&F switch socket combination modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed.

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED fitting 2 feet long complete all as specified and directed.

S & F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed.

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified.

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

S&F exhaust fan AC single phase 230 volt 250 mm sweep, with louver complete all as specified and directed.

S & laying reinforced precast concrete cable cover class LV, type 1 flat, size 250x150mmx40mm.

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 6 sqmm, 2 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls/ on poles/ in ducts/ in GI pipes etc including taking down existing complete all as directed at site.

Supply, installation, testing & commissioning of waterless and maintenance free earthing with earth (grounding) electrodes and PCC pit with cover. (a) Earth electrode : 17.2mm dia copper bonded MS rod shall be in-situ cast an electrically conductive concrete earth enhancing material mixed with cement. Size of embedding of electrically conductive concrete earth enhancing material shall be 85 mm dia. The Electrode of 3000mm Should be able to with stand a fault current up to 35kA (Peak) For 1 Second duly tested from recognised National Test Laboratories like CPRI, ERDA, ERTL, MSME etc ( Not more than 18 months old ). The Ratio of mixing of conductive concrete to cement should be 3:1. Other hardware like nut, bolts and washers should be of stainless steel including copper strip with test point washers with should be of Stainless steel as specified & directed by engineer in charge.

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 16 Sqmm, 4 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls with clamp or required / on poles/ in ducts/ in GI pipes complete all as directed at site.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6 mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI wire 4mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt alround earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe, complete all as specified and directed.

Supply, fixing, testing and commissioning Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB TPN 32Amps IP-30 protection complete all as specified and directed.

Goyal Construction

M/S GARG CONSTRUCTION

KAILASH CHANDRA KHANDELWAL