Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹43,277.55Accepted-AOC | 1 | Accepted-AOC Workorder | |
| 2 | 2₹43,561.30+₹283.75 (0.66%)Rejected-Finance | 2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | Modern Infrastructure L2 | Thanush Ram Construction L1 |
|---|---|---|---|---|---|
| 1.00Providing Speed Breaker at Molasi road 11/6 to Muniappam palayam KM 0/0 - 0/800 (R -258) H/O Molasi | |||||
| 2.00 | Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m | 3.6 | Sqm | 23 ₹82.8 Lowest | 23 ₹82.8 Lowest |
| 3.00 | Cement Concrete in 1 : 2: 4mix using 40 mm metal including cost and conveyance of all materials to site and labour charges etc complete | 0.24 | Cum | 7,000 ₹1,680 Lowest | 7,000 ₹1,680 Lowest |
| 4.00 | Providing and laying of hot applied Thermoplastic compound 2.5mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORT&H specification No.803 including cost and conveyance of materials and labour charges etc complete. | 8.15 | Sqm | 890 ₹7,253.5 | 885 ₹7,212.75 Lowest |
| 5.00 | Providing and fixing reflective road studs of 'category A' Raised pavement markers made out of poly carbonate / methyl methecrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RA/NH. 33023/10/97-D0.III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a C1L not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not. less than 19 +/- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf etc., complete. | 20 | Nos | 475 ₹9,500 | 470 ₹9,400 Lowest |
| 6.00Providing and fixing of Retro Reflectorised cautionary mandatory and Informatory signs ( without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type IV of IRC 67-2012 and ASTM D 4956-09, Specification and fixed over 2.0 mm thick Aluminium sheet fixed on back supporting frame of 25mmX 25mm X 3mm mild steel angle iron post 75mm X 75mm X 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of refro-reflection as per Table 6.6 of IRC 67-2012. the rero - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 (as per MOR&H Specification No. 801). | |||||
| 7.00 | 90 Cm Equilateral triangle (Major road ahead) sign Board | 1 | No | 5,100 ₹5,100 Lowest | 5,100 ₹5,100 Lowest |
| 8.00 | 90 Cm Equilateral triangle (Speed Breaker) sign Board | 1 | No | 5,100 ₹5,100 Lowest | 5,100 ₹5,100 Lowest |
| 9.00 | 90cm Octagon | 1 | No | 8,200 ₹8,200 | 8,100 ₹8,100 Lowest |
| 10.00 | GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package}
(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) | 1 | GST Amount | 6,645 ₹6,645 | 6,602 ₹6,602 Lowest |
Tender Value
₹46,000
Closing Date
29 Sept 2026, 3:30 pmClosed
Special Officer /Block Development Officer (V.Pt)
Molasi Panchayat, Tiruchengode Block.
Providing Speed Breaker 1 Nos in Molasi Panchayat at Tiruchengode block Under Village Panchayat General Fund - 2026 - 2027 TGD-3
2026_RDTN_705495_1
01/2026/PF
Open Tender
Civil Works
Item Rate
30 days
Tiruchengode
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
30 Sept 2026
17 Sept 2026
29 Sept 2026
17 Sept 2026
29 Sept 2026
17 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing Speed Breaker at Molasi road 11/6 to Muniappam palayam KM 0/0 - 0/800 (R -258) H/O Molasi | - | - | - | - |
| 2 | Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m | 3.6 | Sqm | - | - |
| 3 | Cement Concrete in 1 : 2: 4mix using 40 mm metal including cost and conveyance of all materials to site and labour charges etc complete | 0.24 | Cum | - | - |
| 4 | Providing and laying of hot applied Thermoplastic compound 2.5mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORT&H specification No.803 including cost and conveyance of materials and labour charges etc complete. | 8.15 | Sqm | - | - |
| 5 | Providing and fixing reflective road studs of 'category A' Raised pavement markers made out of poly carbonate / methyl methecrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RA/NH. 33023/10/97-D0.III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a C1L not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not. less than 19 +/- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf etc., complete. | 20 | Nos | - | - |
| 6 | Providing and fixing of Retro Reflectorised cautionary mandatory and Informatory signs ( without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type IV of IRC 67-2012 and ASTM D 4956-09, Specification and fixed over 2.0 mm thick Aluminium sheet fixed on back supporting frame of 25mmX 25mm X 3mm mild steel angle iron post 75mm X 75mm X 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. High intensity Retro-Reflectro sheet shall consist of minimum coefficient of refro-reflection as per Table 6.6 of IRC 67-2012. the rero - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 (as per MOR&H Specification No. 801). | - | - | - | - |
| 7 | 90 Cm Equilateral triangle (Major road ahead) sign Board | 1 | No | - | - |
| 8 | 90 Cm Equilateral triangle (Speed Breaker) sign Board | 1 | No | - | - |
| 9 | 90cm Octagon | 1 | No | - | - |
| 10 | GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package}
(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) | 1 | GST Amount | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Technical.pdf
Tender Documents • 0.17 MB
BOQ_847969.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .