Block Babina ke Gram Khailar main Pracheen mandir Guda sarkar ki aur jane wali Neher ke dono taraf sadak Surakchatamak karya

TRAFFIC SIGNS- informatory board (0.90Sqm) Providing and erecting direction and place identification retro-reflectorised sign as per IRC- 67 made of high intensity grade sheeting The Retro reflective sheeting shåll be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage flexibility liner removal adhesion Impact resistance specular gloss and fungus resistance, 3 years outdoor weathering be obtained from International/Govemment Laboratory Institute by the manufacturer of the and its having passed these tests shall sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally In such a situation, the Employer Client, if so desires could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters. numerals and borders etc should be as per MoRTH specification No-801.3.7 Sheet fixed over alumìnium sheeting 2 mm thick with area not exceeding 0.9 sqm.Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm., below ground level as per approved drawing complete.

TRAFFIC SIGNS - Road Delineators Delineator: Supply & Fixing of M S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion The surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have lan ellipsoidal Gr circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide Pales shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtaini clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory / Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition,.it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. (As per lucknow SOR-Ch-26, SI-18-VI|)

TRAFFIC SIGNS - Metal beam crash Barrier Providing & erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail 70 cm above road / ground level fixed on ISMC series channel vertical posts 150x75x5 mm spaced 2m center to center 1.8 m high, 1.1m below ground / road level all steel parts are fitments to be galvinised by hot dip process to confirm 1$1364, metal beam rail to be fixed to a vertical post with a spacer of channel sectio 150 x75x5 mm ,330mm long complete as per clause 810.