Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L1 | Accepted-AOC Awarded as first lowest bidder L1 | |
| 2 | L2₹17.9 L+₹72,224.75 (4.20%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-AOC Second lowest bidder L2 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
17 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
REPAIR TO VALLEY GUTTER MANGLORE TILES JOINERY WORK CEILING AND BLDG MISC WORK AT ARDE UNDER GERD PASHAN
2024_MES_637204_1
GERD/PSN/TOKEN/57 OF 2023-2024
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹40,000
Yes
6 Mar 2024
12 Jan 2024
20 Feb 2024
12 Jan 2024
17 Feb 2024
29 Jan 2024
12 Jan 2024 - 19 Jan 2024
Amount
Dismantling Plain or corrugated steel sheeting any guage, thickness etc including nainital or similar pattern at any height including scaffolding etc complete all as specified and directed.
Supply and fix 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings at any hight including necessary scaffolding (length and girth as fixed) with grade of zinc coating 275 complete all as specified and dircted.
Supply and fix mild steel bands, straps, support or stays for rain water pipe, hold fast, clamp and similar small articles etc conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Hacking out old broken glass exc 1.5 Sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed.
Supply and fix Rough cast wired glass, 6.4mm thick of area exc 0.75 Sqm and n. exc 1.00 Sqm and glazing clip with oil putty at any height including necessary arrangement complete all as specified and directed.
Dismantling single layer manglore pattern or similar pattern tiles in roofing at any height including necessary scaffolding etc complete all as specified and directed.
Dismantling battens for tiles of any size including tilting fillets spaced exc 15cm at any height including scaffolding etc complete all as specified and directed.
Supply and fix in repar 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, bent to a curve,fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs etc at any height including scaffolding etc., complete all as specified and as directed.
Material and labour for IInd class hard wood clean sawn battens sectional area exc 5 & not exc 15 sqcm fixed at 30 cm centres at any height including scaffolding etccomplete all as specified and directed.
Material and labour for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote at any height including scaffolding etc complete all as specified and directed.
Material and labour for roof tiles, Manglore pattern, interlocking at side joints laid dry at any height including scaffolding etc complete all as specified and directed.
Material and labour for roof tiles, Manglore pattern, interlocking at side joints laid dry but except tiles at any height including scaffolding etc complete all as specified and directed.
Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tile, bedded and jointed in cement mortor 1:6 at any height including scaffolding etc complete all as specified and directed.
Taking down shutter of any description area exc. 2 Sqm complete all a specified and diredted.
Supply and fix in repair 1.00mm thick Steel rolling shutters, gear operated type with bevel gear box and crank handle with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete all as specified and directed.
Supply and fix in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, and double rollers brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
Supply and fix in repair Armstrong DUNE RH (R) RH 99 ceiling tiles with Silhouette 15mm face exposed grid (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed silhoutte grid The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm face exposed grid colour white having rotery stitching on all silhoutte type T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M² and need to be installed with Suspension system and necessarey aluminium angle of Armstrong make, complete all as specified and directed.
Supply and fix in repair Mineral Fibre Acoustical tiles with ARMSTRONG DUNE (R) RH 99 (Beveled Tigular) Edge Tiles in module size of 600 x 600 x 16mm, suitable for Green Building application, with Recycled content of 31%.etc and should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) of make Armstrong or Techno commericial equivalent complete all as specified and as directed.
Dismantling of floor, hearth ,or wall tilling ,including cement mortar bedding (but not backing )and removing rubbish off the premises complete all as specified and directed.
Material and labour for double charged dark shade Vitrified ceramic tiles 8mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n. exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed of 15mm thick in CM 1:6 complete all as specified and directed.
Material and labour for double charged vitrified ceramic tiles 8mm thick in dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed.
Taking down door/window chowkat or frame with shuters ( without taking off shutter from the frame) area n.exc 1.5 Sqm each complete all as specified and directed.
Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.
Supply and Fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed
Supply and fix 100mm long butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.
Supply and Fix 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and Fix extruded Aluminium alloy handles, fabricated type anodised size 100 mm long complete all as specified and directed.
Taking down chowkat or frame with shuters ( without taking off shutter from the frame) area exc 1.5 Sqm and n. exc 4.00 Sqm each
Supply and fix Aluminium powder coated sliding windows three track consists of 03 Nos of shutters i.e 02 Nos of Glazed shutters and 01 No of gauzed shutter with size of sections of styles and rails complete all as specified and directed by Engineer-in-Chharge Note : (i) All aluminium section including galzing clips, snap beading, joining cleats, rubber packing screws etc as required are deemed to be including in the rate quoted. (ii) Thickness of powder coating minimum 50 micron. (iii) Glass & wire cloth shall be measured and paid separetely under respective items.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid and beeded and pointed in any mortar complete all as specified and directed.
Material and labour for granite (of any type) 18 to 20mm thick in single piece as in platform of WHB or kitchen steps, window sill, similar work bedded and jointed in cement slury over and including 15mm inch screed in CM 1:4 and pointed in cement with pigment to match the shade of granite complete all as specified and as directed.
Taking down shutter of any description area exc. 1 Sqm and n.exc. 2 Sqm complete all a specified and diredted.
Supply and fix 105X60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.
Material and labour for plain cement concrete 1:3:6 Type C1, ( using 20 mm graded aggregate) for filling of hollow pressed steel frame complete all as specified and directed.
Supply and fix 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both sides.
Material and labour for 30mm thick factory made 2nd class hard wood glazed and skelton shutters open rebated and prepared to receie glass, guaze etc. edges of framing plain chamered or rounded fitted with cut and mitered beads for securing glass etc. all as specified and directed.
Supply and fix 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and Fix 150 mm long extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.
Supply and Fix 300 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed.
Supply and Fix Aluminium floor door stopper double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium cover plate 150mm base fixed with door shutter with screws at appropriate height complete all as specified and directed.
Supply and Fix aluminium ( die cast body )door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and, ISI mark complete all as specified and directed.
Material and labour for painting, two coats with synthetic enamel paint on new wooden surfaces of any description over 10cm width or girth including preparation of surfaces and priming with pink primer complete all as specified and directed.
Supply and Fix in repair 500 Ltrs capacity rotational moulded polythene water storage tank ISI marks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
Supply and Fix 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
Supply and Fix in repairs 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed.
Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.
Supply and Fix 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.
Supply and Fix 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250metre and not exceeding 500metre from the site complete all as specified and directed.
Material and labour for PCC 1:2:4 (Type B1 using 20 mm graded aggregate) levelling course average thickness 40 mm, to match the undulations of roof complete all as specified and directed.
Material and labour for rendering 10 mm thick on fair faces of concrete surface in cement mortar 1:3 to receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed.
Material and Labour for mechanical cleaning of surface make it free from any bituminous residue /dirt, oil and Greece etc and carry out following treatment complete all as specified and directed by GE/Engr-in-Charge. (a) Material and labour for cracks treatment by cutting open cracks and cleaning it from dirt/loose materials etc and filling with polyurethane based sealant with and including application of PU based primer complete all as specied and directed by GE/Engr-in-Charge. (b) Material and labour for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same materials after dilution of water at 50% or specific primer matching same materials as per manufacturer specification and as directed by GE/Engr-in-Charge. Properties of Polyurethane based chemical shall confirm to following Technical Parameters:- (i) Highly Elastic. (ii) UV Resistance (iii) Adhesion to concrete (iv) Tensile strength - not less than 2.0 N/Sq.mm for free film. (v) Elongation - not less than 300% (vi) Solid content by weight- not less than 60% (vii) Air/water permeability BSEN 12390 at 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0 mm (viii) Accelerated weathering (ASTM453) Pass 1000 hours. (ix) Reaction to fire non inflammable
Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc including ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.
Material and labour for old size bricks with fly ash bricks straight or curved on plan exc. 6metre mean radius and setting in cement mortar 1:6 etc. complete all as specified as directed.
Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Material and labour for Rendering 10mm thick in CM 1:6 on concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Supply and Fix fixed type partly panelled & partly glazed partition (SP/DP) aluminium section in frame and section should be not less than 63 mm x 38 mm and wall thickness of each section shall not be lessthan 1.00 mm including 4mm thick plain/frosted glass & 12mm thick prelaminated particle board with decorative choice lamination on both sides fixed with aluminium cleats etc complete all as specified and directed.
Supply and Fix in repair stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc. complete all as specified and directed
Supply and Fix wired glass of 5mm thickness for fixing to aluminium three track window including necessary fitting etc. complete all as specified and directed
VIRENDRA FABRICATORS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .