SPL REPAIR OF INTERNAL RD (OR MD ACCN) AT JAMUN LINE UNDER GE SAUGOR

M & L for Preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally using mechanical compressor to remove all loose dirt etc .and applying evenly a priming/ tack coat with bituminous primer using paving bitumen VG-10 grade at the rate of 5 Kg per 10 Sqm complete all as specified and as directed.

M & L for Premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with 4% binder content (Bituminous gradeVG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with power roller 8 to 12 tonnes capacity to required camber and gradient complete all as specified and as directed. Note-(i) Bituminous macadam shall be laid using self-propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 50 per kg.

M & L for 30 mm thick (consolidated thickness) Bituminous premix semi-dense asphaltic concrete with 5.50 % binder content (Bituminous gradeVG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with power roller 8 to 12 tonnes capacity to required camber and gradient for uniform smooth surface complete all as specified and as directed. Note- (i) Semi dense Bituminous concrete shall be laid using self-propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen required shall be determined following the Marshall Mix design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in Case 3.5.3 of IRC 111:2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 50 per kg.

Surface excavation not exceeding 30 cm deep and averaging 10 cm deep and getting out in soft/loose soil including rolling complete all as specified and as directed.

M & L for 100 mm spread thickness , moorum/red bajri in granular sub base or light wearing surfaces, spread rolled and compacted using vibratory roller of 80 to 100 KN static weight with plain or pad foot drum to required gradient and camber complete all as specified and directed.

Providing and applying 2.5 mm thick road marking strips, centre lines, stop lines, dashes, arroow etc. (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully or semi automatic thermo plastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surfaces including cost of material , labours, T &P , cleaning the road surface of all dirt, seals, oil, grase, and foreign material etc. complete all as specified and directed.

S & F in repair "Cat Eyes" solar reflective type of metal body alloy of size 100mm X 100mm X 20 mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl. MS stud of suitable size as per manufacturer's instructions complete all as specified and as directed.

S & F Solar cat eye aluminium alloy shall (100 % water proofing design according to 65) of size 125 mm x125 mm x 25 mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer's instructions complete all as specified and as directed.

S & F in repair metal tube delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti-theft steel net for reflector protection including embeding in PCC 1:2:4 (150X150X300mm) type B1 complete all as specified and as directed.

S & F in repair rubber speed bump of size 50 mm (height) X 300 mm (width) X 500 mm (length), ABS block black and yellow & reflectors on both sides including necessary fixing arrangement with epoxy/thermoplastic adhesive all as per manufacturers instructions and complying the guidelines issued by Min of road Transport etc., complete all as specified and directed.