PROVIDING WATER SUPPLY LINE FROM KACHARIA SPRING TO SHEEP BREEDING FARM DUGUALLA AND OTHER ALLIED WORKS UNDER DEPOSIT CONTRIBUATION WORK SHEEP BREEDING AND RESEARCH FARM

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) G.I pipe 50mmɸ(M)

G.I pipe 50mmɸ(L)

G.I pipe 40mmɸ(L)

G.I pipe 25mmɸ(L)

G.I pipe 20mmɸ(L)

G.I pipe 15mmɸ(L)

Welding, including transportation of plant at site etc. complete : By electric plant

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing & laying in position cement concrete of specified grade excluding the c/o centering & shuttering all work up to plinth level in 1:4:8(1: cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) (crusher)

Providing & laying in position cement concrete of specified grade excluding the c/o centering & shuttering all work up to plinth level in 1:3:6(1: cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) (crusher) 80% qty. only

Dumping of stone in level.

Providing & laying in position cement concrete of specified grade excluding the c/o centering & shuttering all work up to plinth level in 1:1.5:3(1: cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) (crusher)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) Incl. carriage

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: a) Foundations, footings, bases of columns etc. for mass concrete.

b) Suspended floors, roofs, landings, balconies and access platforms.

c) Lintel, beams, plinth beams, girders, bressumers and cantilevers.

d) Edges of slabs and breaks in floors and walls Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Cold twisted bars

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)

Structural steel work in built up sections, framed work, including, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Iron 40x40x6mm

Providing and fixing mild steel rings of 6mm round bar and 40mm internal dia. For fastening ropes of chicks

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement prime

Finishing of bathroom incl. providing and fixing of ( wash basin, 2no. Tap, mirror of size 0.45x0.60, floor tiles with skirting, ISI mark waker tank 500ltr. (01 No.), 0.5HP motor, complete sanitary fitting (cold). Size of bathroom (1.84 x 1.84m)

MECHANICAL COMPONENTS Providing, Installation, testing& commissioning of 1 no .submersible mono block pump set at water tank with following specifications along with 1 standby unit:- Make Kirloskar /KSB/CRI or other equivalent make Discharge-2500GPH - 3000 GPH Head -35m head – 45m head Job includes shifting of pumping set with allied accessories to pumping station. Providing, fabrication and fitting of G.I pipe 50mm dia. approximately 7-8m in length with GI socket and welding from delivery end of submersible pump set using adopter as per size of pump set upto pipe line.Job also includes cover of pump set by providing ,fabrication and angle iron protection casing with pump set and then lowering in the dugwell and fitting with the pipe line assembling including adopter ,nuts and bolts etc. Job also includes P/f of Submersible cable for supply of power to pump 3x2.5sqmm approximately 50mtr to make joint leak proof with insulation material, p/f of starter to make the pump on/off and protection of pump from single phase and overload etc. set and automation to turn off the pump during depletion of water in tank Complete job includes cost of material, labour, transport, shifting charges and fitment charges and charges for carrying tool-tackles for installation of pump at site. Complete job in all respect.

Design/Fabrication/Installtion/Testing/Commissioning of High mast :- Design/Fabrication/Installation/Testing/Commissioning of High mast on 11Mtr steel tubular pole by way Erection of pole .The exposed portion of the pole is to be painted with one coat of primer and two coats of silver white aluminum paint and underground section of the pole is to be painted with one coat of primer and two coats of black enamel paint both inner and outer side. The pole is to be erected by excavation pit including making foundation in cement concrete in the ration of 1:3:6 (1 cement: 3 coarse sand :6 graded stone, 40mm dia. nominal ). The foundation is to be continued upto0.5 M above ground level around the pole tapered suitably in to the collar in round shape of 0.5 M dia. The exposed portion of the block is to be plastered properly and white washed. The job includes fabrication of circular arm fitted on top of the pole with fixing of 4x100 watt LED fittings connection with wiring 2x2.25 sq mm wire of required length and P/f of MS box fitted with the help of clamps, supplying and fitting of 2x10sqmm flat cable of required length and controlling of light with SPN32amp with box. The arm should have provision for up/Down the arm with the help of gears. Job also includes internal electrification of pump room with 2x1.5sqmm single core copper wire with modular accessories, boxes, switches, sockets, PVC conduits, p/f of power point with 2x2.5 sq mm wire with 15/16 A switches/sockets and box. The wiring control with SPN 32Amp with PVC Box. Complete job includes cost of material, cost of material, labour charges and charges for carrying tool-tackles at site work.complete job in all respects.

Parshotam Kumar