REPAIR AND MAINT OF CEILING FAN, EXHAUST FAN AT OTM/MD ACCN UNDER THE JURISDICTION OF GE (A) JAISALMER

Amount

Attending the complaints of non functional of ceiling fan /exhaust fan /wall fan /air circulated fan of any sweep for testing and repair the ceiling fan /exhaust fan /wall fan / air circulated fan and make the installation serviceable in all respective with out taking down all as specified and directed by Engineer-in-chargeg. Note :- Any accessories found unserviceable that shall be replaced under respective items of this Sch 'A' and which shall measured & paid seperately as "Supply Only" under Srl item No. 2 (a) to (j).

Supply only the following spares/ items :-

(a) Fan condenser, 2.5 Mfd, 240 volts for ceiling/Exhaust fan including PVC clamp complete all as specified and directed by Engineer-in-charge.

(a) Fan condenser, 3.15 Mfd, 240 volts for Exhaust fan including PVC clamp complete all as specified and directed by Engineer-in-charge.

(b) Fan condenser, 4 Mfd, 240 volts for Exhaust fan including PVC clamp complete all as specified and directed by Engineer-in-charge.

(c) Fan regulator electronic Modular step type, 120 watts, 1 module/2 Module complete all as specified and directed by Engineer-in-charge.

(d) Steppped type electronic fan regulator flush type on the existing sheet 120 watts complete all as specified and directed by Engineer-in-charge.

(e) Rubber reel insulator, 3 Nos nut bolt , washer and lock pin complete all as specified and directed by Engineer-in-charge.

(f) Ceiling fan blade complete all as specified and directed by Engineer-in-charge.

(g) Exhaust fan blade size up to 450 mm complete all as specified and directed by Engineer-in-charge.

(h) Ceiling fan hook for fixing fan complete all as specified and directed by Engineer-in-charge. Note :- Rate quoted by the Contractor shall deemed to inclusive of chipping of RCC slab for exposing of reinforcement and insertion & taying of fan hook and making good the disturbed surface to match with existing specification.

(j) Ceiling fan downrod suitable size with brass bolt and nut, GI hook/pin as per requirement of site of any size complete all as specified and directed by Engineer-in-charge.

Taking down ceiling fan / Exhaust fan/Wall mounted fan/Air circulator fan of any sweep sealing cable ends dismanting blade and removing fan and blade to store complete all as specified and directed by Engineer-in-charge.

Supply & Fix ball bearing suitable for ceiling fan 1200/1400mm sweep including taking down existing unserviceable ball bearing complete all as specified and directed by Engineer-in-charge.

Supply & Fix ball bearing suitable for exhaust fans up to 450mm size including taking down existing unserviceable ball bearing complete all as specified and directed by Engineer-in-charge.

Supply & Fix brass GM bush suitable for fan any size including taking down existing unserviceable brass GM bush complete all as specified and directed by Engineer-in-charge.

M & L for rewinding of fan of any size with supper enameled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of following size complete all as specified and directed by Engineer-in-charge.

(a) Ceiling fan 1200/1400 mm Sweep

(b) Exhaust Fan 250/300/380 mm

(c) Exhaust Fan 400/450 mm

(d) Wall mounted fan 450 mm Sweep

(e) Air circulator 600 mm sweep

M&L for preparation of ceiling fan/exhaust fan complete in situ and painting using mechanical as per existing colour with synthetic enamel paint by spraying machine including filling cavity with filler one coat after cleaning all dust etc complete all as specified and directed by Engineer-in-charge.

Hanging only ceiling fan and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-charge. Note :- Cable shall measured and paid under respective item of this schedule.

Fixing only exhaust fan/Wall Mounting/Air circulator and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-charge. Note :- Cable shall measured and paid under respective item of this schedule.

Supply & Fix 3 Core PVC insulated and sheathed cable with copper conductor of size 40/0.076. and including taking down existing unserviceable cable complete all as specified and directed by Engineer-in-charge.

Note :-The quoted rates shall deemed to be included for the following : (a) As the above work is required to be carried out for rectifying day to day E/M nature compliants, the following term and conditions shall be applied. (b) Hence the contractor shall have to employee adequote manpower not less than 2 elects & 2 helpers to attend and rectify all the complaints/defects received in a day on same day. (c) A creadit rep of contractor shall report daily at service centre to concern JE E/M or Engr -in- Charge and receive job card/complaint slip for repair/replace the items on same day failing which the panalty shall be imposed and recovered as under :-

(i) Non reporting of trademen : 500/- per elect /day & Helper 350/- per helper per day (ii) Non attending the complaints to with in 48 hrs 50/- per complaints per day shall be recovered.(b) The contractor shall depute adequate trademan/ helper to repair/ replacement of u/s parts and attending the day to day complaints received from user on daily basis but not less than 2 Electrician and 2 helper per day.

SHREE BHAGWATI ENTERPRISES

Manisha Enterprises

Shri Maruti Trading Co.

star electricals

Leelashah Enterprises

SHRI HARI CONSTRUCTION

new india engineers