REPAIR AND MAINT TO FENCING GATE BOUNDARY WALLS FOOTPATHS DRAINS AND SEWAGE LINES INCLUDING OTHER MISC WORKS AT BAIRAGARH AREA OF BHOPAL MILITARY STATION UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Demolition of cement concrete in ground floor, (unreinforced) paving n exc 15 cm thick(below or above GL) incl tiling if any complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in levelling course complete all as specified and as directed.

M&L for multicolour vitrified outdoor, heavy duty, parking tiles of 9 -10 mm thick of size 400x400 mm matt for outdoor area, jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick size laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

All as per item No. 4.00 here-in-before but as in skirting over 15mm backing coat in CM 1:4 including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular), joint free area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors and pointed in white or coloured cement to match the shades of tiles over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles including Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

All as per item No. 6.00 here-in-before but as in skirting over 10mm rendering in cm 1:4 as in backing coat.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base concrete complete all as specified and directed.

M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 grade with grey cement and pigment for path etc over 50 mm thick sand cushion under paver block complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in bed blocks, copings, kneelers, apex stones, bed plates, lintels and the like etc complete all as specified and as directed.

M&L for 75 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in hardstadning and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, masonry, brick work, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh similar work Confirming to Fe-290 Gde E-165 etc complete all as specified and directed.

Excavating in post holes in any type of soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, incl removing of surplus soil complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified.

Dismantling fencing wire mesh, any type and any size complete all as specified and directed.

S&F of PVC coated GI chain linck fencing of size 50x50mm, wire dia 2.4 to 4mm, 60 GSM including provn of binding wire complete all as specified and directed.

S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each) line wire to be measured) complete all as specified and directed.

S&F of mild steel round bars 10 mm dia and over, cut to length, bent to shape required and all as specified conforming to gde Fe 410- W (Gde E-250) quality A for securing chain link fencing complete all as specified and directed.

Demolition of brick or stone work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for moorum in returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and directed.

Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM 1:6 complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type C2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for mild steel, TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste for formwork to sides of concrete foundation, footing, base of column, raft, raft beam sides and soffits of foundation and, walls, plinth beam for rough finished surfaces of concrete complete all as specified and directed

M&L for reinforced cement concrete (nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

M&L for 15mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for steel gate, including pintle hinges, stops, hand made sliding bolts, etc. framed work, forged into spikes; framed guard bars; barred iron doors; and drilled for fixing of steel sheeting or other covering similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description complete all as specified and directed.

M&L for 15mm thick rendering in cm 1:4 faces of brick or concrete surfaces(external surfaces) mixed with water proofing compound @ 3% by wt of cement, finished fair, even and smooth without using any extra cement complete all as specified and directed. Note :- Water Proofing compound will be measured and paid seperately.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation of new surface complete all as specified and directed.

All as per item No. 39.00 here-in-before but for complete removal of existing treatment.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings/wall cladding complete all as specified and directed.

M&L for pre galvalume aluminium zinc coating AZ-150, GI based corrugated steel sheet 0.50 mm thick of an colour having tensil strength of 550/MPA as in roof covering/cladding to wall/ ridge, fixed with self tapping screw/L type or J type cranked hook bolts complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws complete all as specified and directed.

M&L for walling of random rubble masonry brought in, course, built in cm 1:6 complete all as specified and directed.

All as per item no. 44.00 here-in-before but except stone

M&L for cement concrete 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in surface channel and drains complete all as specified and directed.

Demolition and breaking up drain pipes 150/200MM DIA (SGSW, AC, RCC or PVC), set in cement mortar and disposal of unserviceable materials and rubbish to a distance not exceeding 100m complete all as specified and directed.

S&F of 200mm dia (DWCPE Pipe), class SN-8 structural wall polyetylene (Pipe with online coupler and elastomeric rubber ring) with hollow annular smooth outer surface and a smooth inner surface (double wall plain) for non pressure underground drainage and sewage application type B nomial size (Dn /ID) made of polyethylene (PE) material confirming to ISI:6098 (Part II : 2013) and to be transported handled installed and joined as per Annex A Of ISI:6098 (Part II :2013) complete all as specified and directed.

Returning filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

M&L for precast, RCC cover slab, chullah hoods, chajjas, water troughts,shelves and similar articles 1:2:4 type B-1 using 20mm graded stone aggregate, set in cement mortar 1:4 complete all as specified and directed.

Deduct amount of Rs. 94,665.00 for Schedule of credit (calculation will be done off line)

PADAMSHRI CONSTRUCTION CO (BID ID -3246632)

Samaksh Enterprises (BID ID -3240714)

M/S AJAY JAIN (BID ID -3245894)

M/S Parikshit Sharma (BID ID -3240800)