Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹93.9 LAdmitted-Finance | -4.36% | ₹93.9 L | L1 | Admitted-Finance |
| 2 | L2₹97.2 LAdmitted-Finance | -1.00% | ₹97.2 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | - | Rejected-Technical Rejected |
| 4 | Rejected-Technical | - | - | - | Rejected-Technical rejected |
| 5 | Rejected-Technical | - | - | - | Rejected-Technical rejected |
Tender Value
₹98.2 L
EMD Value
₹2.0 L
Closing Date
12 Dec 2025, 4:00 pmClosed
Executive Engineer Construction Division kashmir
Executive Engineer Construction Division kashmir
Up-gradation of play field at SK Stadium Bandipore
2025_SPORT_296557_1
NIT 55 of 2025-26
Open Tender
Civil Works
360 days
srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
ex.engineer, CDK
₹2.0 L
2 Feb 2026
27 Nov 2025
13 Dec 2025
27 Nov 2025
12 Dec 2025
27 Nov 2025
Chain Link fencing :- Earthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5mtr in width and not exceeding 10 sqm on plan depth upto 1.5mtr including backfilling of soil & disposal of excavated soil to be leveled and neatly dressed within 25mts lead.
Providing and laying stone soling hand packed on level incl ramming with heavy rammers incl. all carriage upto site of work
Providing and laying in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level .(1:4:8 ) stone aggregate 40mm nominal size aggregate
P/L in position cement concrete of specified grade excluding the cost of centering and shuttering incl. all carriage . a) 1:2:4 mix ( 1 cement: 2 coarse sand: 4graded stone crushed aggregate 20 mm nominal size)
Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. 9made of G.I. wire of 4mm) incl. carriage by mechanical transport upto site of work.
Painting on steel work with synthetic enamel paint of approved brand and manufacture in all shades to give an even shade shade (two or more coats) on new work incl. priming coat of zinc primer complete.
ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. bags alsc having Earth pit chamber (300mm x 300mm) with man-hole cover for the above. Includin cost of 12.5mm wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe or PVC having Corrugation complete job having long strip
Cricket competition Pitch Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
Consolidation of pitch base to required gradient and X-section using Power Road Roller 8-10 Tonne Capacity to achieve the required density.
Providing and laying of soling stone size on level (hand packed ) of size not more than 100mm incl. Consolidation with Power Road Roller 8-10 Tonne Capacity Complete and all types of carriages complete
S/L of coarse sand incl. sieving of sand properly to remove any foreign substance and laying in layers not exceeding 50mm in depth and surface to be flooded with water incl. carriage of sand from near source
S/L of sandy loom (mixture of fine sand and fine clay) in 1:10 ratio to be laid in layers not exceeding 50mm in depth and consolidation with 1/2 Tonne roller or plate vinrator complete.
Supply and laying of Top layer of earth having highhest clay content available to be laid in layers not exceeding 50mm in depth and consolidation with 1/2 tonne roller or plate vibrator.
Providing and fixing of sign board duly fabricated of M.S sheet 2mm thick with necessary angle iron supports (50mmx50mmx5mm) including providing and applying priming coat of approved steel primer and two coats of synthetic enamel paint of approved brand and manufactuer including writting aplha numericla of requaired height (30 CM) and width (8 cm) as desired by Engineer Incharge at site including electrical, welding and carriages upto the site of work compelte job.
Net Practice Pitch Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
P/L of stone soling hand packed,incl ramming with heavy rammer incl. all carriage upto site of work
P/L in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level (1;4;8) stone aggregate 40 mm nominal size crushed aggregate (Including carriage )
P/L in position Reinfored cement concrete of specified grade excluding the cost of shuttering and centring finishing and reinforcement all work upto plinth level 1:1.5:3 Mix
Steel reinforcement for RCC work incl straightening ,cutting, hoisting ,placing, in position all complete (TMT Bars incl. Carriage
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (65 mm dia pipe of 4.5mm thicness)
Centering and shuttering incl shuttering propping etc and removal of form work for foundation footing bases of columns
P/F of synthetic polythene twin thickness knotted net 3 mm guage and 50x50 mm mesh
P/Fixing 15x15 feet cricket canvas sight screen and is movable foldable with stable MS section frame with channel base with 4 special turf tyres allowing easy movement with color black on one side of sight screen and white colour on other side
earth filling and levelling Supply ,spreading and levelling of good earth in layers not exceeding 30 cm thick incl. ramming, dressing, watering and rolling the top layer with power road roller/COMPACTOR 8-10 ton capacity incl. all leads, lits, royalties, taxes and carriages complete incl. engagement of skilled labour for levelling of top surface upto the desited level/finish as directed by the Engineer Incharge
Proving and fixing of hoardings made of 1"x1" MS Hollow sections pipes (Frame work) with 1mm thick flex including cost of photographs complete
PP/F of 50mm puff panels in walls of approved quality and colour incl. cost of all frame works using structural steel (MS Tube 50x25mm) and hings etc incl. all carriages upto site of work complete.
Dugout Supply of dugout structure fabricated from MS tube having minimum dimension of 50 x 50mm Square Tube detachable framework with powder coated matt finish. The height of the dugout will be 2.05 meter at front side, Curved surface roof and 4.9 mtr length The seating capacity will be of 10 players. The structure will be covered with 3mm thick transparent or colored polycarbonate sheet on top and two sides.Wheel Assembly – Solid tyre 10” wheel attached to dugout for easy movement without any damage to the sports field.The Structure is Provide with HDPE Blow Molded Seat:Double-wall hollow blow mold bucket type seat having minimum dimensions as 465 mm side length x 440 mm front width x 390 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 1.9-2.1 kg. Chair should withstand in high temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, the chair should be fixed with Metal Inserts moulded inside seat to connect seat with sheet metal bracket which is mounted on 40x2mmS Square tube.Chair has a warranty of 2years against significant color fading and 5 Years against breakage due to manufacturing .chair plastic part tested with xenon-Arceposure Test as per ISO 48892-2:2013. Cycle-1.TheseatpassBSEN12520: 2015 TEST
Construction of Volley Ball Court Preparation of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller including making good the undulation etc and disposal of surplus earth beyond Municipal limits with all leads, lifts, loading and unloading charges complete.
Supply and laying of GSB (Granular Sub base course) incl spreading, levelling and consolidation (power road roller 8-10 tonne capacity) to required gradient camber including all carriage complete job.
Supply and stacking of graded stone aggregate, moorun and stone screening at site incl. laying of water bound macadam with specified stone aggregate, stone screening and binding material incl. screening sorting spreading to template and consolidation with power road roller 8-10 tonne capacity incl carriages for an avg lead of 50 kms complete base course (G2) with (63-45) mm size incl. stone screening 13.2 mm size.
Providing and laying wet mix macadam on prepared sub grade/sub base with crushed quarry stone aggregate of specified grading as per IRC/MOST specification including mixing crushed material with predetermined quantity of water in accordance with specification to form dense mass which is spread and rolled with vibratory roller 80/100KN capacity speed of which should not exceed 5KM/Hour for each layer, rolling should continue till 98% density is achieved to approved grade and X-section the mixing is to be prepared in approved mech, mixing plant of suitable capacity including laying of cold emulsion with pressure sprayer at the rate 0.75 kgs/sqm complete, including cost of all materials, all leads lifts octroi charge taxes etc.
P/F of artificial UV resistanat polyethylene synthetic grass with rigid monofilment yarn, 40mm pile height and 1250g/sqm pile weight with total carpet weight not less than 2500g/sqm and infiill in the ratio of 2:1 with sand(size of sand 0.2mm-1.0mm) 15mm (minimum)height and Rubber 8mm(minimum)height infill weight not less than 2.25kg/sft .The stitch rate per meter should be minimum of 285 All line marking shall be white, unless in the drawings. line marking shall be sitched 'tufted' material (painted lines are not acceptable) the carpet should be laid as per the manufacturers manual incl. All applicable taxes, Lavies, Octoria, transportation loading/unloading complete. (analysis enclosed)
Supply of Volleyball post set of standard quality and make made of heavy duty 75mm round steel pipe with telescopic system for height adjustment, provided with wheels for smooth shifting and levelers to adjust height on uneven surfaces, complete including all applicable taxes, royalties, lavies etc incl. loading/unloading assembling erecting and adjusting at site and all leads and lifts complete.
FOOTPATH Earthwork in excavation by manual means in trenches for foundation including disposal of excavated earth lead 50 m , disposed earth to be leveled and neatly dressed in All kinds of Soil
Supplying/filling boulders tightly hand packed under foundation & under floors incld. all leads, lifts and all carriages upto site of work complete.
Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing all work upto plinth level in 1:4:8 (1 cement : 4coarse sand : 8graded stone aggregate 20mm nominal size)
Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing all work upto plinth level in 1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20mm nominal size)incl all carriages for an avg lead of 20kms by M.T complete.
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Ordinary cement without any pigment.
Centering & shuttering including strutting, propping etc. and removal of formwork etc Foundations, footings, bases for columns
Carriageof material by MT from source to site of work 25 km by mt (Sand and aggregate)
Electrification:- Point wiring for switch controlled primary light points with 3x1.5 sq mm (P+N+E) FRLS
Point wiring for 16 Amp Socket outlets (Two out lets wired in one sub circuit ) with 3x4 sq mm (P+N+E) FRLS PVC Insulated 660/1100 volt grade flexible stranded (56 strands of 0.3 mm dia.) copper conductor wires in recessed or surface conducting system and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socket out let along with 240 volt 16 Amp control Switch of approved quality and colour housed in zinc chromate passivity GI boxes with inter connection complete as per specifications and as required. The Job includes providing and laying of circuit wiring of same size from DB to first switch in sub circuit (Maximum two points shall be connected/provided in one required.
Point wiring for Ceiling fan points with 2x1.5 sq mm (P+N+E) FRLS PVC insulated 660/1100 volt grade flexible stranded (50 strands of 0.25 mm dia.) copper conductor wires in recessed or surface conducting system and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 6 amp control switch and 240 volts 300 watt 5 step electronic speed regulator of approved and colour housed in zinc chromate passivity GI boxes with modular cover plate and with inter connections complete as per specification and as required. The Job includes providing and laying of circuit wiring with 3 x 2.5 Sq.mm PVC Insulated multistranded copper to be laid through pvc conduit from DB to first switch in sub circuit complete job Including cost of condits.(Seperate wiring for normal and invertor supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length) Complete as required and Samples of wires /Switches /Sockets are to be approved by Engineer Incharge before execution or third party to be nominatedby department if required.
PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduitng system and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 6 amp control switch of approved quality and colour housed in zinc chromate passivity GI boxes with modular cover plate complete as per specification and as required. The Job includes providing and laying of circuit wiring with 3 x 1.5 Sq.mm PVC Insulated multistranded copper to be laid through pvc conduit from DB to first switch in sub circuit complete job Including cost of condits (Seperate wiring for normal and invertor supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length) Complete as required and Samples of wires /Switches/Sockets are to be approved by Engineer Incharge before execution or third party to be nominated by department if required
Point wiring for 6 Amp Socket out lets with 3x2.5 sq mm (P+N+E) FRLs PVC Insulated 660/1100 volt grade flexible stranded (50 strands of 0.25 mm dia.) copper conductor wires in recessed or surface conducting system incl the cost of supplying and fixing modular grid plate mounted flush mounted 3 no 240 volts 6 amp 5 pin socket out let along with 3 No's of 6 Amp control Switch same size from DB to first switch in sub circult (Maximum two points shall be connected /provided in one circuit and no extra circuit wiring shall be paid what so ever reason or lenght) Complete as required and Smaples of wires//Switches/Sockets are to be approved by Engineer Incharge before execution or third party to be nominated by department if required
Supply, Installation, Testing and commissioning of FRAME Panel Luminary Lights dully Recessed/ Concealed mounted light fittings (600x600x9mm) (Square Shaped 2ftx2ft size 36 WLED of ISI/ISO/IEC Certified The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of two years which includes replacement of damaged fixtures (What so ever reasons) by fresh one during AMC period Philips or Havel's Halonix or HG or Wipro or Jaguar or TRILUX or Bajaj
Supply installation testing and commissioning of 15 W + LED Surface Mounted /Cancelled Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95, THD<10%, CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips or Havel's or Surya or Panasonic or H.G Wipro orJaguar /Bajaj make
Supply, installation, testing and commissioning of Sub main Wiring along with earth of following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. (wire shall be approved before execution of work by Sirte Incharge Engineer strictly) a) 2X 10sq. MM+ 1 X 10 sq. MM (Phase +N+E) Power point Sub main in One run From proposed Control board to another Distribution boards
B) 2 X 6SQ.MM + 1 X 6. SQ.MM [Phase +N+E) for Lightings of Pavilion etc
C)2 X 4SQ.MM + 1 X 4. SQ.MM [Phase +N+E) for Each Flood Light of Pavilion etc
Supplying and fixing following way, horizontal /Vertical type TPN and SPN, sheet steel, MCB distribution board, 240v/415 V, on surface/ recess, complete with tinned copper bus bar, neutra bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as require samcoISO/IEC Certified Like Havel's/Legrand/ABB/Honeywell/ a) 6 way (4+18) Double Door TPN
b) 12 way (Double Door TPN
supply installation testing and commissioning of 1200mm sweep ceiling fan with 3 nos, blades, 30 cm long down rod, 2nos, canoples, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz.single phase Supply, etc. complete. USHA/Havells/Polycab
Providing and Fixing of mediu
Supply, Installation, Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. Compt 225-250mm Shutter Typed
Supplying and fixing following rating, Double pole, (P +N) 240 V, C Curve Residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as reqd. a) 40Amp. Legrand /Havells or L&T /Schneider/ABB/Siemens
m grade PVC conduit including its allied accessories like bends, etc for laying of wires through it dully recessed etc fitted with necessary cliffs and rowel plugs complete or to be laid in slab.(25/32 mm dia) .of pvc conduits for lighting circuits and conduits for laying of wiring circuits for heating points point,Sub mains including making of good the wall with plaster and wall putty etc b)25mm dia x 32 mm dia
b)63Amp. Legrand /Havells or L&T /Schneider/ABB/ Siemens
carraige of material by M.T from source to site of work A)sand for an avarage lead of 25 Kms
b) Supplying, Installation, Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified
Carriageof material by MT from source to site of work 25 km by mt (Sand and aggregate)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.42 MB
BOQ_960948.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid