Proposed Fire Fighting system in Camera Museum, Chakkarpur Gurugram.

Amount

FIRE FIGHTING PLANT ROOM EQUIPMENTS Supply, installation, testing and commissioning of fire authority approved fire fighting pumps, electrically driven generally as specified and shown in equipment schedule complete with Fire Hydrant Main Fire Pump Supply, installation, testing and commissioning of fire authority approved horizontal single stage, single outlet pumping set with bronze impeller, C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plate with RCC base and with all pump accessories, including pressure switch, pressure gauge ( both with cut off ball valves ) complete as per specifications. Motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction and specifications. Capacity : 2280 lpm App.head : 70 m App.H.P. : 78.0 HP

Main Diesel Pump - Common for Hydrant System Supply, installation, testing and commissioning of fire authority approved horizontal single stage, single outlet pumping set with C.I. body and bronze impeller connected by means of a flexible coupling heat exchanger cooled diesel engine mounted on a common structural base plate with RCC base, anti-vibration pads and foundation including pressure switch, pressure gauge ( both with cut off ball valves ) complete with electric panel for automatic starting, battery including spare battery, automatic starting arrangement, exhaust pipe of required length to discharge outside building with muffler, oil tank mounted on suitable structural supports complete in all respects as per specifications ready for use and as per latest requirement of fire authority/regularities. Capacity : 2280 lpm App.head : 70 m App.H.P. : 78.0 HP

Fire Jockey Pumps Supply, installation, testing and commissioning of fire authority approved horizontal single stage, single outlet pumping set with bronze impeller, C.I. body, electrical panel and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plates with all pump accessories including pressure gauge, pressure switch ( complete with cut off ball valves for both ) complete as per specifications motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (Specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction and as specified/approved. Capacity : 180 lpm App.head : 70 m App. H.P. : 7.5 HP RPM : 2900

TERRACE LEVEL - FIRE PUMP Supplying, storing, handling, shifting, installation, testing and commissioning, supervision of testing of electric driven terrace pump suitable for automatic operation of horizontal end section centrifugal type sychoronous speed of 2900 rpm TEFC confirming to IP : 55 & Flexible coupling & coupling guard mounted on common bed plate of fabricated mild steel channel or cast iron type as required. Capacity 450 LPM at 3.5 Kg./Cm2 delivery pressure for fire hydrant network. PANELS: (1 NO PANEL FOR EACH PUMP, COST INCLUDED ABOVE IN PUMP) Supply, installation, testing and commissioning of following integrated, cubicle type,dead front, extensible, sheet steel control panel. The panel shall be suitable for 440 volts, 50 cycles, 4 wire supply The following components and accessories shall be mounted with ineach control panel. One no 60 amps TP incoming MCCB with the following: 0-500 volts 96 x96 square mm voltmeter with slector switch and control fuses- 1 SET 0-100 amps 96 x96 square mm ammeter with CT's and slector switch- 1 SET Phase indicating lamp with toggle switches. Indication lamps for ON/OFF/TRIP status Outgoing Feeders / Starters as below: 60 ATP MCCB with star / delta as starter suitable for 15 HP motor for Downcomer Pump - 1 Set Provision in control panel to connect flow switch for autmatic operation of roof fire pumps.

Supply and installation of pressure gauge panel as per the requirement & comprising: Pressure gauges & pressure switches with ball valve and 2 x 1.5 sq mm copper conductor wiring to motor starter panel Water piping from system upto the gauge panel along with valves etc. Sheet metal enclosure with glass paneling etc. as approved

Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :- 150 mm dia

100 mm dia

80 mm dia

Supply, fabrication (as per code), installation, testing and commissioning of Pressure vessels 450mm diameter and 1000mm high fabricated from 8-10mm M.S. plate with accessories inside painting with epoxy paint and outside with enamel.

Supply, installation, testing, trial run and commissioning of hydrants all complete as required and as approved Internal hydrants / landing valves generally as specified and all complete with: 63mm dia single outlet SS landing valve IS marked with suitable size bolts, nuts, washers and gaskets. Landing valve shall be TAC Approved Make.(MAKE - SPAGO / FIRE SHIELD / NEW TECH)

First aid hose reel with 25 mm dia, 30 m long rubber hose, ball valve, piping and GM nozzle (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

63mm reinforced rubber hoses (RRL) with male and female GM coupling, IS marked- 15 m long (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

standard short size SS branch pipe with nozzle of 20mm nomnal bor outlet with instaneous type 63 mm dia coupling complete IS marked & TAC approved. (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

Providing and fixing of Fire Axe ((MAKE - SPAGO / FIRE SHIELD / NEW TECH)

TAC approved 1.6mm thick M.S. fire hose cabinet (750x600x250mm) made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose pipes, fittings & accessories. The box shall have a front glass door with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) - for external and roof hydrant. (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

Providing and fixing angle iron (40 mm x 40 mm x 5 mm) MS door frame 900x2100 door capable of accommodating fire hose reel, landing valve, hose pipes, fittings & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) Cost of fire extinguishers not included in item rate. (Liasioing with civil contractor for making 900x600x2100 Recessed type mansoary box (by civil contractor).

Supply, installation, testing, trial run and commissioning of hydrants all complete as required and as approved (at roof level). Internal hydrants/landing valves generally as specified and all complete with: 63mm dia single outlet SS landing valve IS marked with suitable size bolts, nuts, washers and gaskets. Landing valve shall be TAC Approved Make. (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

63mm reinforced rubber hoses (RRL) with male and female GM coupling, IS marked- 15 m long (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

standard short size SS branch pipe with nozzle of 20mm nomnal bor outlet with instaneous type 63 mm dia coupling complete IS marked & TAC approved. (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

Providing and fixing of Fire Axe (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

TAC approved 1.6mm thick M.S. fire hose cabinet (750x600x250mm) made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose pipes, fittings & accessories. The box shall have a front glass door with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) - for external and roof hydrant. (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

Supply and installation of Butterfly Valves with mating flanges generally as specified all complete. (MAKE - NEU-G/LEADER/ZOLOTO/SANT) 200 nominal bore

150 nominal bore

100 nominal bore

80 nominal bore

Providing and laying cast iron non-return valve IS marked with flanges genertally as specified complete.(MAKE - NEU-G/LEADER/ZOLOTO/SANT) 150 nominal bore

100 nominal bore

80 nominal bore

Supply, installation testing and commissioning double flanged MS pot strainers with M.S. body and SS 40-grade mesh strainer. (MAKE - NEU-G/LEADER/ZOLOTO/SANT) Size 200mm

Supply, installation, testing and commissioning C.I. flanged double air valves size 25mm with 25mm SS isolation valve etc. all complete. (MAKE - NEU-G/LEADER/ZOLOTO/SANT)

Supply, fabrication & laying heavy grade IS marked “C” class heavy duty MS pipe piping complete with all fittings, pipe supports, clamps etc. as approved with weleded jointing for external hydrant system. Thes pipes shall be provided with 4.0mm thick weather proof treatment like covering with pypkote complete. (MAKE - Jindal Hissar / Tata /Apollo) 150 nominal bore

100 nominal bore

Providing, laying, testing & commissioning of “C” class heavy duty MS pipe conforming to IS 3589 and 1239 (all pipes shall be ISI marked and shall be one of approved makes) including DI FORGED fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as per specificatipns and as required. (Above Ground) (MAKE - Jindal Hissar / Tata /Apollo) Note: a. Threaded joint upto 50mm diameter pipe. b. Welded joint above 50mm diameter pipe. 200 mm nominal bore (Class C)

150 mm nominal bore (Class C)

100 mm nominal bore (Class C)

80 mm nominal bore (Class C)

65 mm nominal bore (Class C)

25 mm nominal bore (Class C)

Supply, installation, testing and commissioning ss orifice plates in pipelines to reduce pressure from 8 kg. to 3.5kg/ sq.cm. (MAKE - GETECH / NEWAGE/ SAFE GUARD / NEW TECH)

Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, conforming to IS 2878, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. (MAKE - SPAGO / FIRE SHIELD / NEW TECH) Capacity 4.5 kg

Providing & Fixing of stored pressure Fire Extinguisher ABC powder type (Mono Ammonium Phosphate Powder) Magnetic Pressure Gauge having the facility to check at site, Discharge Time less than 9 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 21A, B Rating 55B as per BS EN-3 BIS 15683 marked, Can Construction : Deep drawn & CO2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating ofCan : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, Helium LeakDetection Tested, Warranty. (MAKE - SPAGO / FIRE SHIELD / NEW TECH) 6 kg Mono ammonium phosphate (ABC) type cartridge operated extinguishers

2 kg Mono ammonium phosphate (ABC) type cartridge operated extinguishers

Providing & Fixing of 5Kg Automatic ceiling mounted Fire Suppression Extinguisher Direct Low Pressure, Dupont™ Clean Agent FE 36 Zero ODP, Stored Pressure Type, fitted with Pressure Gauge, Discharge Time 32 Seconds approx, Applicable on class A, B, C and electrically started fires, With suitable support (BMS & ELEC. ROOM) - For Below Ceiling Level (MAKE - SPAGO / FIRE SHIELD / NEW TECH)

Providing and fixing mechanical foam type Trolley Mounted Fire Extinguisher of bearing to IS:10568/IS13385/IS13386 with dis (MAKE - SPAGO / FIRE SHIELD / NEW TECH) Capacity 50 Lit.

Providing and fixing Carbon Dioxide Type Trolley Mounted Fire Extinguisher of as per IS: 2878 with discharge time of 10 to 20 sec/15 to 36sec/20 to 60sec respectively. (MAKE - SPAGO / FIRE SHIELD / NEW TECH) 22.5 Kg. CO2 Fire Extinguisher (trolley mounted)

For supply of Fire fighting main pumps control panel as per above details (with standrad items supplied by Manufactures)

For installation, testing & commissioning of Fire fighting main pumps control panel as per above details

Supply, laying, testing and commissioning of power and control cabling, as per Standard specification including end termination as required. Power cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on existing cable trays). Power cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on existing cable trays). 3C x 70 Sq. mm

3C x 6 Sq. mm

Control Cabling (PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays). 5C x 1.5 Sq. mm

Providing and fixing 25 x 5 mm copper strip in 40 mm

Providing and fixing 25 x 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 4.0 mm dia. Copper wire on surface or in recess for loop earthing as required.

Supply & laying of rubber mat of size 1000 mm & 12 mm thick.

Supply and installation of ladder type 16G ms cadmium plated 'U' shaped channel 40mm x 20mm cable tray of following sizes: 150 mm wide

300 mm wide

SS Infra

JMD MAHA MEVA GROUP