DEFPROC/09/2020-21

Civil Construction Materials.

Cement 43 grade PPC in 50 Kg bags. Make : Birla/ACC/Ultratech/Ambuja.

Fly Ash Brick

Sand Fine.

Hardcore of broken stone n exc 63mm

Stone Aggregate graded 12.50 mm.

Stone Aggregate graded 20 mm.

Stone aggregate graded 40 mm

Moorum

TMT Bar 12mm diameter. Make : TATA/SAIL/RINL /TISCO/SRMB UDHYOG LTD/Shyam steel

TMT Bar 8mm diameter. Make : TATA/SAIL/RINL /TISCO/SRMB UDHYOG LTD/Shyam steel

Round MS bar 6 mm dia Make : TATA/SAIL/RINL /TISCO/SRMB UDHYOG LTD/Shyam steel

Misc Construction Materials.

Binding wire 0.90mm diameter.

Floor tile Group B1 (a) of size 600 x 600mm and 10mm thick with water absorption less than 0.08% as per IS : 15622 . Make - Kajaria/Johnson/Orient.

Non skid tiles of size 300 x 300mm and 7mm thick as per IS : 13712. Make - Kajaria/Johnson/Orient.

Glazed tiles ceramic 200 x 300mm x 7mm thick. Make : Kajaria, Johnson, Orient.

Cement Base Paint Make : Duracem/Snowcem

White cement Each packet 01 Kgs .Make: Birla/JK cement

Mild steel conduit plastic/pvc coated Drapery curtain rods 20mm di, Length 1.5 mtr. including Two Bracket and Two fancy end caps for Drapery curtain Rod with 05 Nos PVC curtain rings.

20 - 25 mm thick Kota stone of size 550mm x 550mm machine cut in uniform colour duly polished of approved quality as per sample.

18-20 mm thick grante stone as per sample cut as in required size. Note : Rate included notching/chemfering and polishing etc.

Thinner

First quality Synthetic enamel paint. Make- Asian/Berger.

Red Oxide primer Ist quality Make ASIAN/ SHALIMAR/BERGER

Black Japan Paint Ist quality. Make ASIAN/ SHALIMAR/BERGER

Paint Brush 4" Make Horse or equivalent.

Lime Powder Each Pakcet 5 Kgs

Misc Items.

Window Glass 60" x 20" x 5 mm, ISI Marked

Alumimium Door Glass 48" x 60" x 5 mm, ISI Marked

Aluminium aldrops bolt of 300mm length, ISI Marked.

Door Lock 25 mm 6 lvr Office type for Aluminium Door (Inter Lock), ISI Marked

Pre coated Galvalume steel sheet of 1000 mm x 1200 mm, 0.5mm thick confirming to AFTM-A653/ZIF 3312/IF227/AF1397 and of thick 0.50 mm for ridge profile Make : Make: Jindal/Tata Bluescope/Bhushan Note :- Ridge will be in the form of roof panel corrugation profile. SKETCH "R"

Wall Panel. 50 mm PUF insulated thick Panel with 0.5mm PPGL sheet both sides in 40±2 Kg Density. The PU panel shall be CFC free using n-Pentane as a blowing agent made out of continuous sandwich panel line running on uninterrupted power supply. Panel shall have PPGL sheet on both side of Polyurethane Foam confirming to IS 12436:1988. The pre coated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS : 277 : 1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGL sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The panels shall be vertically joined together by tongue and groove joints. The PU Foam shall be self-extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt (+, -2 Kgs)PUF Panel Manufacturing Plant with continuous paneling high pressure dispensing unit capable of forming a panel with PUF insulation with Hot platen rotating Press with requisite heating heated platens to allow smooth flow of PUF chemical mixture when it is spread over for forming of panels so as to attain the desired finish. Make: Jindal Mectec/Lloyd/ Sintex/ACME/ Synergy Thrislington.

Roof Panel: Roof Panel: 30/64 mm PUF insulated thick Corrugated Panel with 0.5mm PPGL sheet both sides in 40±2 Kg Density. The PU panel shall be CFC free using n-Pentane as a blowing agent . The roof panels will have tounge and groove jointPanel shall have PPGL sheet on both side of Polyurethane Foam confirming to IS 12436. The pre coated sheet shall be of minimum 550 mpa steel grade confirming to IS 14246 and shall have zinc coating of minimum 120 GSM as per IS : 277, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGL sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation.) A slope of 1:4 shall be provided such that the wall height at eaves is 3.0m and 3.76m at centre gable. Make: Jindal Mectec/Lloyd/ Sintex/ACME/ Synergy Thrislington/Green Tech/BNAL/Pre-star.

Roof covering: Roof covering shall be of Pre-Painted galvanized steel sheet (GI-Base) shall have a minimum thickness of 0.50mm TCT, 550 Mpa profile width 1070mm of desired length with trapezoidal shape profile(conforming to ASTM A653, IS 3312, IS 277 , AS1397) to be fixed by using self drilling screw to be as AS3566 class 3 of Buildex or Tata bluescope. These sheets are laid over a frame of trusses, columns and purlins fixed using suitable fastener, having minimum 120GSM galvanizing conforming to IS-277, 2003 is to be fixed on the top junction of the roof using suitable fasteners. A slope of 1:4 shall be provided with maintaining the wall height at eaves by front 3m and back 2.7m. Make : Jindal/Tata Bluescope/Bhushan

Aluminium Ventilator of size 600 x 450mm

PVC Door of size 750 x 2100mm, solid PVC frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube and shutter made solid panel PVC 30mm thick (style) consisting of frame made out M S tunes for top & bottom rails. MS moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together. Make : Rajshri/Sintex/Madan aluminium & decoration Ludhiana/Poly moulds Kanpur/Gaziabad plasti - wood industries Gaziabad. Note :- The door frame will be 150 mm embedded in floor. Hence the height of the frame 2250 mm (2100 + 150 = 2250mm). SKETCH "H"

Steel Flush Door double leaf of size 1200 x 2100mm,

Factory made solid panel pvc skelton door shutter with stainless steel Mosquito proofing wire cloth Single leaf of size 1100 x 2100 mm 30mm thick consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of single side Prelam PVC sheet panels The wire gauge shall be wrapped on an additional square 8mm M.S. Solid tube & hits tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly door frame shall be existing pressed steel frame 95 x 55 x 1.5 mm thick. opening as per specification & drawing. The door having the following fittings. (a) 04 Nos of 100 mm stainless steel but hinges (b) Two Nos of 150 mm aluminium handles (c) Two nos of heavy duty door stoper. (d) Two nos aluminium 150 mm tower bolt. Make : Rajshri/Sintex/Madan aluminium & decoration Ludhiana/Poly moulds Kanpur/Gaziabad plasti - wood industries Gaziabad or equivalant. SKETCH "J"

PVC Door of size 750 x 1500mm, solid PVC frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube and shutter made solid panel PVC 30mm thick (style) consisting of frame made out M S tunes for top & bottom rails. MS moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together. Make : Rajshri/Sintex/Madan aluminium & decoration Ludhiana/Poly moulds Kanpur/Gaziabad plasti - wood industries Gaziabad. Note :- The door frame will be 150 mm embedded in floor. Hence the height of the frame 2250 mm (2100 + 150 = 2250mm). SKETCH "K"

Sanitary Items.

Ceramic European Water Closet (EWC) of size 580mm with cover. Make : Hindware/ Parryware/Cera.

Vitreous Chine Ceramic wash basin (630 x 450mm) with pedestal (white colour) accessories to include waste pipe, coupling, down pipe, bracket for fixing WHB etc. (Make Parryware/Hindware /Cera).

Vitreous Chine Ceramic wash basin (550 x 445mm) (white colour) counter top (suitable for fixing in RCC slab with granite top) accessories to include waste pipe, coupling, down pipe, etc. (Make : Parryware, Model No. Cascade NXT C0407 or equivalent in Hindware /Cera.

Looking mirror cabinet large size of best quaility of size 350 x 450 mm Make of glazz Atul/Modi/saint gobain frame make Prayag

CP Towel Rail 600mm long with Peg Stay Bracket.Make :Parryware/Hindware/Jaguar

CP brass Soap Tray. All as per sample approved

Stainless steel Sink 1 mm thick with drain baord over all size 915 x 460 mm and bowl size 410 x 320 x 160 mm including all fittings i.e waste coupling and waste pipe etc. Make- Nirali/Prayag/ NeelKamal, ISI Marked

Urinal Pot fully stall vitrous China with water splitter and all accesseries. Make -Parryware/ Hindware /Cera.

Plumbing items.

CP 15 mm stop Cock Make :Parryware/Hindware/Jaguar

PVC Connection Pipe 450mm longwith both side of nut of size 15mm diameter.

uPVC Ball valve 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Ball valve 20mm Make Aqua Gold supreme/Prince/Astral

PTMT swiveling shower rose 15 mm + shower arm 225 mm Cat part No 181 - C of prayag Make :Prayag/Supreme/Astral

PTMT bib cock fency 15 mm diameter Make :Prayag/Supreme/Astral

PTMT Bib Cock long body 15 mm diameter Make :Prayag/Supreme/Astral

Gun metal Gate valve 20 mm Make : Leader/zoloto

CP Bib brass Cock long body 15 mm diameter. Weight not less than 400 gm each bib cock. Make :Parryware/Hindware/Jaguar/Benson etc.

CP Toilet Paper Holder Make -Parryware/ Hindware /Cera.

CP Pillar Cock 15 mm dia .Make :Parryware/Hindware/Jaguar/Benson etc.

PTMT bib cock standard 15 mm Make :Prayag/Supreme/Astral

CP Brass Wall mixer hot and cold with 60 cm PVC fancy type pvc pipe and telephonic shower complete including all accessories. Make :Parryware/Hindware/Jaguar/Benson etc.

CP Brass wash basin mixer to hot and cold water with swan nack, hot and cold writing will be engraved on mixer Make :Parryware/Hindware/Jaguar.

HDPE water tank white colour for storage of water tripple layered manufactured under rotationally moulded process using FDA approved grade of High Density Polyethylene Enamel (HDPE) duly stabilized for out door appliances produced in cylindrical vertical shape with manhole and lockable hinged type lid shall be provided in 1000 ltrs water capacity. Material shall be conform as per IS specification IS- 12701 : 1996. Make Sintex/Polyplast/Polycon.

HDPE water tank white colour for storage of water triple layered manufactured under rotationally moulded process using FDA approved grade of High Density Polyethylene Enamel (HDPE) duly stabilized for out door appliances produced in cylindrical vertical shape with manhole and lockable hinged type lid shall be provided in 500 ltrs water capacity. Material shall be conform as per IS specification IS- 12701 : 1996. Make Sintex/Polyplast/Polycon.

HDPE water tank white colour for storage of water double layered manufactured under rotationally moulded process using FDA approved grade of High Density Polyethylene Enamel (HDPE) duly stabilized for out door appliances produced in cylindrical vertical shape with manhole and lockable hinged type lid shall be provided in 200 ltrs water capacity. Make Sintex/Polyplast/Polycon.

Float Valve brass 20mm with complete set. Weight not less than 450 gm each valve and wall thickness of the float is 2 mm.

uPVC 15 mm pipe. Make Aqua Gold Supreme/Prince/Astral

uPVC 20 mm pipe. Make Aqua Gold Supreme/Prince/Astral

uPVC coupler 15 mm. Make Aqua Gold Supreme/Prince/Astral

uPVC coupler 20 mm. Make Aqua Gold Supreme/Prince/Astral

uPVC Elbow 90 degree 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Elbow 90 degree 20 mm. Make Aqua Gold Supreme/Prince/Astral

uPVC reducing elbow 90 degree 20 x 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Equal Tee 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC equal Tee 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC reducing TEE 20 x 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC end Cap (Plain) 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC end Cap (Threaded) 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC end Cap (Threaded) 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Union 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Union 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threded elbow (Plastic) 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threded elbow (Plastic) 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded Tee 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded Tee 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC male threaded adopter M.T.A 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC male threaded adopter M.T.A 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded adopter F.T.A 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded adopter F.T.A 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded Tee (Brass) 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded Tee (Brass) 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded elbow (Brass) 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded elbow (Brass) 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Male threaded adapter (Brass) 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Male threaded adapter (Brass) 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded adapter (Brass) 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Female threaded adapter (Brass) 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC pipe clip plastic 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC pipe clip plastic 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Threaded plug 15 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Threaded plug 20 mm Make Aqua Gold Supreme/Prince/Astral

uPVC Tank connector 20 mm Make Aqua Gold Supreme/Prince/Astral

Teflon tap

uPVC solvent cement Regular duty containing 250 ml per container Make Aqua Gold Supreme/Prince/Astral

Sewage Disposal.

Eco drain pipe 160 mm dia SN - 4 PVC - Upipe Make-Supreme/Finolex/Prince/Astral

PVC SWR Coupler 160 mm dia for eco drain pipe. Supreme/Finolex/Prince/Astral

RCC NP 2 Pipe 300 mm dia

RCC NP 2 Pipe 250 mm dia

RCC NP 2 Pipe 150 mm dia

PVC SWR Grating 110mm. Make-Supreme/Finolex/Prince.

Urinal waste pipe . Make :Prayag/Supreme/Astral

PVC SWR 110mm Nahani Trap. Make-Supreme/Finolex/Prince.

PVC Floor Trap 110mm . Make-Supreme/Finolex/Prince.

PVC SWR Bend with inspection door cover 110mm diameter. Make-Supreme/Finolex/Prince.

PVC SWR Bend 110mm diameter. Make-Supreme/Finolex/Prince.

PVC SWR 110mm socket or connector. Make-Supreme/Finolex/Prince.

PVC SWR pipe 110mm dia. Make-Supreme/Finolex/Prince.

PVC SWR pipe 75mm dia. Make-Supreme/Finolex/Prince.

PVC SWR Cowl 75mm dia. Make-Supreme/Finolex/Prince

PVC SWR tee 110mm Make : Supreme/Finolex/Prince

PVC SWR Reducer 110 x 75mm dia Make : Supreme/Finolex/Prince

Rubber lubricant for SWR pipe containing box 500 gm per box Make Marut supreme/Prince/Astral.

PVC SWR 75 mm bend Make-Supreme/Finolex/Prince

PVC SWR Tee 75 mm Make-Supreme/Finolex/Prince

PVC SWR clamp for holding of 75 mm dia pipe Make-Supreme/Finolex/Prince

PVC SWR clamps for holding of 110 mm dia pipe. Make-Supreme/Finolex/Prince

Electrical Items.

Switch Fuse unit 4 pole 63 Amp, 415 volts conform to IS 60947 1&3. Make - Havells/L&T/Legrand ISI Marked

MCB DB 4 Way TPN, 415 volt conform to IS 13032. Make : Havells/Legrand/HPL.

MCB DB SP&N 8 way, double door. Make : Havells/Legrand/HPL .

MCB SP 6 Amps. Make : Havells/Legrand/HPL ISI Marked.

MCB 10 Amps, SP, 240 volt, 10KA conform to IEC-60898(2002) and IS 8828(1996). Make : Havells/Legrand/HPL ISI Marked.

PVC switch mounting box 8" x 10" ISI Marked.

PVC switch mounting box 7" x 4" ISI Marked.

Energy efficient 5 star rated Ceiling Fan 1200mm sweep without regulator. Make : Model No. Energia ISI White of Usha or equivalent model in Havells/Crompton Greaves ISI Marked.

Exhaust Fan 450 mm sweep, 1400 RPM with louvers and fitting acessories. Make : Model No. Supreme DLX HD 450mm of Bajaj or equivalent model in Usha/Khaitan/Havells.

Ventilating Fan 250 mm sweep, plastic body with louvers. Make : Model No. Ventil Air DX of Havells or equivalent model in Usha/Bajaj/CG.ISI Marked.

Ventilating fan metalic body and blade, powder coated metalic finish, 300 mm sweep, 1350 RPM with sturdy steel bird guard. Make : Model No. Ventilair DSP of Havells or equivalent model in Crompton Greaves/Usha ISI Marked.

Ceiling rose surface bakelite 65x50 mm 3 terminal. Make : Anchor/Plaza/Havells ISI Marked.

Electronic regulator stepped type two module suitable for ceiling fan 1200mm sweep. Make : Anchor/Plaza/Havells ISI Marked.

PVC pipe 20 mm dia,heavy duty. ISI Marked.

PVC casing capping 32x16 mm size. ISI Marked.

Flexible conduit 20 mm dia. White Colour

PVC junction box two way, 20mm dia. ISI Marked.

PVC junction box three way, 20mm dia. ISI Marked.

PVC space bar saddles for 20 mm dia PVC pipe. ISI Marked.

PVC Tee for 32x16 mm casing caping. ISI Marked.

PVC Tee for 20mm dia PVC pipe. ISI Marked.

PVC elbow for 20mm dia PVC pipe. ISI Marked.

PVC coupler for 32x16 mm casing capping. ISI Marked.

PVC internal corner bend for 32x16 mm casing. ISI Marked.

SDS Type Steel Screw full threaded 1/2".

SDS Type Steel Screw full threaded 1".

SDS Type Steel Screw full threaded 3/4".

Electronic static Kilowatt hour meter three phase, four wire, 5-30 Amps, class 1 with LCD display with enclosure conform to IS-13779. Make : Havells/HPL ISI marked.

Ply board 12 mm thick of size 375 mm x325mm with four Nos GI nut and bolts with washers of size 10 mm dia 100 mm long.

Electronic Chock 36 W for Ceiling Light 600 x 600mm Product Name - BGD 36 100I Product Code - 112690 .Make : Bajaj

Furniture Items

Looking Mirror. Looking Mirror gents of size 450mm x1500mm x 5.5mm thick with 6mm thick plywood back & teak wood finished all around frame and hanging arrangement make Saint Gobain/Modiguard.

Writing boards/Notice boards of size 1500x1200mm, manufactured using green or white color ceramic and synthetic sheets, which are pasted on the front side of ply board. Moreover, these boards have aluminum channels and fiber corners fixed at the outer beading.

Cylinder Cage. Cylinder cage of sze 2000mm x 600mm of height 450 mm will be providded as shown in Sketch 'PU'

EXTERNAL ELECTRIFICATION.

LT feeder pillar box , out door type factory made, CPRI approved, sloppy roof, double door, front and rear openable made out of CRCA sheet 3.15 mm thick painted with high class powder coated paint in side and out side of approved shade with locking arrangement ,two earth terminals and suitable cable glands for all incomming and out going cables connection, mounted on 50x50x5 mm angle iron, and danger plate complete all as specified and directed, including the following components :- (a) 4 Nos 600mm size Aluminium bus bars for phase and neutral of rating 200 amps duly mounted on porcealain support or any other insulating material - 01 set. (b) Incoming MCCB 415 volt, 16 KA, 4 pole, 63 Amp capacity . Make: Havells/HPL/Legrand. - 01 No

SECURITY FENCING.

Galvanized steel chain link fencing of dia 3.15 mm dia and apperture size 50 x 50 mm,weight not less than 2.9 KG per Sqm of Fencing. Chain link fence should be as per IS - 2721 - 2003 (Second revision), Galvanized steel wire should be confirm to IS - 280 : 2006 having zinc coating type heavy as laid down in IS 4826, hot dipped galvanized coating on round steel wire or IS 1257, Electrogalvanied coatings on round steel wires. Tensile strength of the wire shall be within 400 to 500 MPa. The wire shall be free from any scale, irregularties, imperfections, flaws, sand splits and other defects. zinc coating shall be smooth even and bright. Note : Chain link fencing should be suplied in one role of span 1.8 RM wide.

Barbed Wire, Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing weight Min 0.097 and Max 0.106 Kg Per RM of barbed wire. The barbs shall have a length of not less than 13 mm and not more than 18 mm . the points shall be sharp . The line and point shall be circular in section, free from sclaes, rust and other defects and shall unifromly galvanized. Barbed wire shall be galvanized steel barbed wire conforming to IS 278 - 2001. The galvanized barbed wire shall be manufactured rom galvanized mild steel wire conforming to IS 280 - 2006. Galvanized coating of steel wire shall confirm to requirement as laid down for medium coated wire in IS 4826, Hot dipped galvanized coatings on round steel wires. (All specification of barbed wire will be as per para 10.32 and 10.32.1 of MES SSR part I 2009.)

Punched tape concertina coil 610 mm dia with anti rust black colour IA confirming to specifications No IND/ENG/PROV/1245/B (except clause 11 & 13) for advance sample and raw materials respectively) and CQAE, Pune drawing No CQAE/5660/1602/a (except clause 11.1 and 11.2.2). Dia of coil when closed = 610 + 20 mm. Dia of coil when opened upto 6 mtr = 580 + 20 mm. Wt of coil with 50 turns and 129 nos clips = 9 kg +/- 5%

MS angle of size 75 x 75 x 6 mm conforming to FE 410 W (Gde E - 250) quality B. ISI Marked Make SAIL/TATA/RINL/SRMB Note : (a) MS angle should be fabrictaed as as per drawing attached. (b) Five notches will be made for holding the barbed wire at U shape of fencing post as per Sketch 'L' attached.

MS flat 40 x 4 mm conforming to FE 410 W (Gde E - 250) quality B. ISI Marked make SAIL/TATA/RINL/SRMB NOTE: MS flat will be cut in 1.8m length and five drilled hole will be made of 15 mm dia in each MS flat.

10 mm dia ms round bar Conforming to Fe 410 - W (Gde E 250) quality A or fe 290 (Gde - E 165) Make SAIL/TATA/RINL/SRMB

4 mm dia wire for fencing. Shall be galvanized and shall confirm to IS 280 - 2006, specification for mild steel wire for general engineering purpose. Galvanized coating of steel wire shall confirm to the requirements as laid down for medium coated wire in IS 4826, hot dipped galvanized coating on round steel wire or IS 12753, electrogalvanized coating on round wires. Make SAIL/TATA/RINL/SRMB.

30 KVA Genr Set Spare Parts.

Fuel filter element primary for 30 KVA Make : Kirloskar

Fuel filter element secondary for 30 KVA Make : Kirloskar

Fuel flexible pipe for 30 KVA Make : Kirloskar

Hose pipe for 30 KVA Make : Kirloskar

Oil Filter for 30 KVA Make : Kirloskar

Fan Belt for 30 KVA Make : Kirloskar

Fuses for 30 KVA Make : Kirloskar

Change over switch 63 Amp, 3 phase 4 pole, 415 volt Make: Havells

PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable,1100 Volt grade size 2.5sqmm dia two core confirm to IS694/1990(roll of 100m) Make: Havells

Bed Switch 5Amp Make: Havells

Extension board 3 pin x 15Amp Sockets Make: Havells

LED Bulb 15W Make: Philips

Bty 12V 100 AH Suitable for 30 KVA Genr Set Kirloskar Make:Exide express/Koel Green/Amron

Self Starter Suitable for 30 KVA Genr Set Make : Kirloskar

Coolant Oil

Electrolyte mixed distilled water

EXLPE insulated armoured heavy duty electric cable with standarded aluminium conductor 1100 Volt grade size 6sqmm 2 core Make: Havells

XLPE insulated armoured heavy duty electric cable with standarded aluminium conductor 1100 Volt grade size 4sqmm 2 core Make: Havells

MCB DB SP&N 2 way, 240 volt Make: Havells

63 KVA Genr Set Spare Parts.

Fuel filter element primary for 63 KVA Make : Kirloskar

Fuel filter element secondary for 63 KVA Make : Kirloskar

Fuel flexible pipe for 63 KVA Make : Kirloskar

Hose pipe for 63 KVA Make : Kirloskar

Oil Filter for 63 KVA Make : Kirloskar

Fan Belt for 63 KVA Make : Kirloskar

15 KVA Genr Set Spare Parts.

Fuel filter element primary for 15 KVA Make : Kirloskar

Fuel filter element secondary for 15 KVA Make : Kirloskar

Fuel flexible pipe for 15 KVA Make : Kirloskar

Hose pipe for 15 KVA Make : Kirloskar

Oil Filter for 15 KVA Make : Kirloskar

Fan Belt for 15 KVA Make : Kirloskar

Fuses for 15 KVA Make : Kirloskar

5 KVA Genr Set Spare Parts.

Fuel filter element primary for 5 KVA Make : Kirloskar

Fuel filter element secondary for 5 KVA Make : Kirloskar

Fuel flexible pipe for 5 KVA Make : Kirloskar

Hose pipe for 5 KVA Make : Kirloskar

Oil Filter for 5 KVA Make : Kirloskar

Fan Belt for 5 KVA Make : Kirloskar

Fd Water Supply Scheme

Repair of RO System 500 ltr/hr purification capacity with all connected accessories and one spare set of filter media for One Year Repair/Maintenance

Delivery pipes (composite multi-layer pipes) 75mm dia (outer diamerter)

Composite multi-layer equal elbow 90 degree 16 mm. Make : KiTEC

Composite multi-layer female threaded Connector 40 mm. Make : KiTEC

Composite multi-layer female threaded Connector 50 mm. Make : KiTEC

Composite multi-layer female threaded Connector 75 mm. Make : KiTEC

Composite multi-layer reducing TEE 50 x 25 mm. Make : KiTEC

Composite multi-layer female elbow 75 mm. Make : KiTEC

Composite multi-layer female Tee 25 mm. Make : KiTEC

Composite multi-layer female Tee 40 mm. Make : KiTEC

Composite multi-layer female Tee 50 mm. Make : KiTEC

Composite multi-layer male threaded connector 75 mm. Make : KiTEC

Union of Size 75 mm

Union of Size 40 mm

Union of Size 50 mm

PVC Stop Cock 50mm

Plug Short 20mm Make : Kitec

Plug Short 25mm Make : Kitec

Composite multi-layer male threaded connector 16 mm. Make : KiTEC

Composite multi-layer male threaded connector 40 mm. Make : KiTEC

Float valve dia 20mm Make : ISI Marked

PVC Stop Cock 25mm Dia Make : Aqua gold

Repair

Repair of Ventilator of size 600 x 450mm

Repair of Aluminium door of size 1.0 x 2.1 m made out of Al Frame section of fixed with 4mm thick glass pane. Al door shall have 01 no. door closer. The door shutter shall be fixed with the door frame with 3 nos SS hinges 100mm length. The door shall be provided with 1nos locking arrangement and two nos, 150mm long handles.

Repair of Aluminium Window of size 1000 x 1500mm, anodised as window will be consisting double shutter one of glazed and second of mosquito proof mesh (two leaf for glazed and two leaf for wire mesh side open able side hunging). The window frame will be 102 x 45 x 2.10mm end on vertical member of size 55 x 45 x 2mm will be fitted in the middle of window (parallel to the hiegt). Window shutter will be side open able and shutter member size will be 50 x 45 x 2mm. Two shutter for glaze and two shutter for stainless steel mosquito wire cloth incl all necessary fitting joinery cleats glazing packing, aluminium snap beading etc. The middle partition rail factory fitted with leg proof rubber gasket. Make of aluminium section Hindalco/Nalco/Jindal.

Repair of Fixed window (G-1) of size 2400mm x 1800mm, 8mm thick toughened tinted glass fixed with powder coated aluminium frame section of size 102X50X2.10MM thick . Make of aluminium section Hindalco/Nalco/Jindal.

Repair of Steel Flush Door double leaf of size 1200 x 2100mm,

Repair of Hand held Trolley. . Hand held trolley made of stainless steel with four Nos pneumatic wheel.

Repair of Revolving Chair. Revolving chair of size 1060 x 700 x 12mm thick, pressed ply wood upholstered with fabric and moulded polyurethane foam. The back foam shall be desegined with contour lumber supper for extra comfort with PVC lipping around. Pedestrial assy will be injection moulded in block 30% glass filled nylon. A 10.5mm forged bright zinc plated MS cartor pin is of pressfitted into each prong. Make- Godrej/Usha/Durian or equivalent.

Repair of Steel Almirah. Locker steel of size 1900mm x 910mm x 490mm with 20 guage with 03 shelves at equal interval.

Repair of Steel Almirah. Locker steel shall as per drawing of size 1985x1300x485mm with internal shelves 4 Nos of 1 mm MS Sheet duly painted with two coats of synthetic enamel paint (Spray painted)

Repair of Chair Easy. Chair easy of teak seasoned wooden duly french polished with plastic cane seat and back rest of over all size 545x545x740mm. All wood work and teak veneered surface shall be French polished. First grade kiln seasoned teak wood free from knots and cracks shall be used.

Repair of Locker Bed side. Locker steel shall as per drawing bed side steel 900x430x1200 mm with vertical portition at centre and internal shelves 3 nos one side and other side fixed non corrosive alumiuium rail 20 mm dia at top with fixing clamp complete of 1.60mm MS Sheet duly painted with two coats of synthetic enamel paint (Spray painted) as per approval. locking arrangment will be 100 mm aluminium Hasp & Staples with hing pinincluding bolt to hind plate.

Repair of Writing Table. Table of size 900 x 610 x 760 mm shall be provided. Table top shall be 19 mm thick particale board prelaminated decorated sheet fixed with hollow section frame with screw @ 200 mm c/c. The frame work of table shall be of MS hollow section of size 25 x 25 mm all as per drg. end of legs will be sealed with MS sheet 1.6 mm thick with proper weelding process to avoid the dust entry. All steel surface will have two coats of synthetic enamel paint over a coat of red oxide primer. The legs will be fitted with PVC shoe hard.

Repair of Storage Rack. Storage racks of size 2000x600x1800mm made of pre- fabricated mild steel structure of MS angle of size 50 x 50 x 6mm. These are provided with 1.25 mm thick MS sheet. It will be spray painted internally and externally with Olive green over a coat of redoxide primer. Four Nos racks will be welded to the vertical members.

Repair of Chair dinning 890 x 440 x 430 mm.

Repair of Bed Hard. Bed Hard. Steel Charpoy with head board. Ply wood top of size 900x2050mm to be provided MS Square cube of dimension as specified in drawing. BWR phenol bondd ply with edging (unpolished) placed on top of 25 x 25mm supports. 18mm thick prelaminated partical baord with PVC edging screwed to MS Strip to be provided in the head board.

Repair of Peg Table. Peg table of size 300mm x 450mm x 380mm. Table top will be 19mm thick ply and will be covered with 1.2mm thick particle board with sunmica top. All the wood work and teak veneered surface shall be French polished first grade seasoned teak wood as per IS free from knots and cracks shall be used.

Repair of energy efficiant 5 star rated Ceiling fan 1200/1400MM, Make : Havels/Bajaj/CG ISI Marked.

Repair of Exhaust fan 450MM sweep, Make : Havels/Bajaj/CG ISI Marked.

Repair of Ventilating Fan metalic body and blade, powder coated metalic finish, 300mm sweep 1350RMP with sturdy steel birdn guard. Make : Havells/Crompton/Greves/Usha.

Repair of Pedestal fan 450mm. Make : Havells/CG ISI marked

Repair of Wall mounted fan oscillating 400mm sweep complete. Make : Compton/Greves/Bajaj/Havells

Repair of Water Cooler electric diven (single phase) having approx storage capacity of 80 lts and nominal cooling capacity of 40 ltr per hours. Make : Voltas/Bluestar

Repair of Deep Freezer of capacity of 300 ltr. Make : Voltas/LG/Bluestar

Repair of Water Heater storage type five star rated, electric driven, single phase having storage capacity of 25 ltr with hot water outlet and inlet PVC connection and other connected items. Make : Hvells/Bajaj/Racold.

Repair of Floor mounted Water Dispensor 20ltr capacity 230V, single phase for cold and hot water with cabinet and two numbers 20 ltr capacity jar. Make : TATA Voltage/Bluestar/Usha

Repair of Ventilating Fan 250 mm sweep, plastic body with louvers. Make : Model No. Ventil Air DX of Havells or equivalent model in Usha/Bajaj/CG.ISI Marked.

M/s Buildcon

S S ENTERPRISE

SHREE BALAJI TRADERS

M/S PRATIMA ENTERPRISE

S.R. Traders

SWASTIKA METAL & ELECTRIC CO.

SHREE BALAJI TRADERS

S.R. Traders

S S ENTERPRISE

M/s Buildcon