REPAIR / MAINT OF DI / CI / GI PIPE LINES, VALVES, SERVICE TANKS, CLEANING OF UG SUMP / GROUND SUMP / SETTLING TANK, OH TANKS, VALVE AND ALLIED SERVICES AT ARTY CENTRE AND AOP AREA UNDER GE NASIK ROAD CAMP

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Cutting existing 300 mm dia cast iron pipe in position for insertion of new pipe/tees, branches etc.

All as per item No 04 above but size of 250 mm dia

All as per item No 04 above but size of 200 mm dia

All as per item No 04 above but size of 150 mm dia

All as per item No 04 above but size of 100 mm dia

Taking up cast iron water mains incuding flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead of size 300 mm dia

All as per item No 09 above but size of 250 mm dia

All as per item No 09 above but size of 200 mm dia

All as per item No 09 above but size of 150 mm dia

All as per item No 09 above but size of 100 mm dia

All as per item No 09 above but size of 80 mm dia

Supply and laying cast iron pipes with spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of size 300 mm dia

All as per item No 15 above but size of 250 mm dia

All as per item No 15 above but size of 200 mm dia

All as per item No 15 above but size of 150 mm dia

All as per item No 15 above but size of 100 mm dia

All as per item No 15 above but size of 80 mm dia

Taking up or down GI Tubing and connections including cleaning for refixing or removal to store - of size 15 mm dia

All as per item No 21 above but size of 20 mm dia

All as per item No 21 above but size of 25 mm dia

All as per item No 21 above but size of 40 mm dia

All as per item No 21 above but size of 50 mm dia

Refixing old GI Tubing and connection in New or old position (walls, Ceiling, Floors etc) of size 15 mm dia

All as per item No 26 above but size of 20 mm dia

All as per item No 26 above but size of 25 mm dia

All as per item No 26 above but size of 40 mm dia

Laying only old serviceable removed GI Tubing from site and connection in New or old position (in trenches) of sizes 20mm dia

All as per item No 30 above but size of 25 mm dia

All as per item No 30 above but size of 40 mm dia

All as per item No 30 above but size of 50 mm dia

Supply and laying GI tubing medium grade with all fittings and fixed complete laid in trenches of size 20 mm dia

All as per item No 34 above but size of 25 mm dia

All as per item No 34 above but size of 40 mm dia

All as per item No 34 above but size of 50 mm dia

Supply and laying GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of size 15 mm dia

All as per item No 38 above but size of 20 mm dia

All as per item No 38 above but size of 25 mm dia

All as per item No 38 above but size of 40 mm dia

Removing Unserviceable Gate valve/stop valve of water supply lines, closing the opening with plug or preparing for new as required necessary fitting complete and deposited to E/M store yard of size 20 mm dia

All as per item No 42 above but size of 25 mm dia

All as per item No 42 above but size of 40 mm dia

All as per item No 42 above but size of 50 mm dia

Supply and fix Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size 20 mm dia

All as per item No 46 above but size of 25 mm dia

All as per item No 46 above but size of 40 mm dia

All as per item No 46 above but size of 50 mm dia

Supply only Float valve high prssure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed of size 20 mm dia.

All as per item No 50 above but size of 25 mm dia

Supply only bib tap high prssure of PTMT with epoxy coated screwed for iron pipe and fixed of size 15 mm dia .

All as per item No 52 above but size of 20 mm dia

Cutting 15 mm dia existing galvanised iron pipe in position for insertion of new pipe/tees, branches etc.

All as per item No 54 above but size of 20 mm dia

All as per item No 54 above but size of 25 mm dia

All as per item No 54 above but size of 40 mm dia

All as per item No 54 above but size of 50 mm dia

All as per item No 54 above but size of 80 mm dia

M&L for run lead joints of size 300 mm dia complete for water mains with spigot & socket pipes and fittings, all as specified and directed

All as per item No 60 above but size of 250 mm dia

All as per item No 60 above but size of 200 mm dia

All as per item No 60 above but size of 150 mm dia

All as per item No 60 above but size of 100 mm dia

All as per item No 60 above but size of 80 mm dia

Supply & fix rubber tyton joint of size 300 mm dia.

All as per item No 66 above but size of 250 mm dia

All as per item No 66 above but size of 200 mm dia

All as per item No 66 above but size of 150 mm dia

All as per item No 66 above but size of 100 mm dia

All as per item No 66 above but size of 80 mm dia

Supply & fix rubber gasket joint for flange end of size 300 mm dia

All as per item No 72 above but size of 250 mm dia

All as per item No 72 above but size of 200 mm dia

All as per item No 72 above but size of 150 mm dia

All as per item No 72 above but size of 100 mm dia

All as per item No 72 above but size of 80 mm dia

Supply & fix machanical joint ISI marked for spigot end pipe of size 300 mm dia :

All as per item No 78 above but size of 250 mm dia

All as per item No 78 above but size of 200 mm dia

All as per item No 78 above but size of 150 mm dia

All as per item No 78 above but size of 100 mm dia

All as per item No 78 above but size of 80 mm dia

Supply and laid spigot and socketed CI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size upto 150mm dia.

Supply and laid spigot and socketed CI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size 200mm to 300mm dia.

Dismantling/taking out unserviceable sluice valve of size 80mm to 300mm bore dia by opening/cutting rusted nuts, bolts etc all as specified and directed.

Supply and fix CI sluic valve both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.0 ISI marked complete all as specified and directed of sizes 80 mm dia

All as per item No 87 above but size of 100 mm dia

Supply and fix CI sluice valve Make- Upadhaya both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed of size 150 mm dia

All as per item No 89 above but size of 200 mm dia

Dismantling/taking out unserviceable air release valve of size 80 mm by opening/cutting rusted nuts, bolts etc all as specified and directed.

Supply and fix cast iron double ball air release valves of size 80mm as per IS 14845, PN rating H-7 ISI marked.

Dismantling/taking out unserviceable non return valve of size 80 mm to 300 mm by opening/cutting rusted nuts, bolts etc all as specified and directed.

Supply and fix CI double end flanged and drilled non return valve of following size 200 mm dia

All as per item No 94 above but size of 150 mm dia

Cutting of road /hard standing for laying /dismentling of pipe line and making good surfaces matching with the existing surface after laying of pipe line up to 30 cm

fabricate, supply & fix stainless steel spindle and nut suitable for 300 mm dia sluice valve complete with stainless steel nut and threding as per sample & directed by engr-in- charge

All as per item No 97 above but size of 250 mm dia

All as per item No 97 above but size of 200 mm dia

All as per item No 97 above but size of 150 mm dia

All as per item No 97 above but size of 100 mm dia

Disconnecting unserviceable RCC tanks including breaking and lowring from site with the help of hooks /crains if required making exsting surface water proof and also refixing inlet & out let pipe of sizes 20/25/40mm dia for fixing only PVC tanks of 500 ltrs capacity.

All as per item No 102 above but of 1000 ltrs capacity

Dismantling PVC water tanks and removing from the site to store 500 ltrs capacity.

All as per item No 104 above but of 1000 ltrs capacity

All as per item No 104 above but 2000 ltrs capacity

Supply & Fix rotational moulded polythene water tank 500 lit cap (cylidrical verticle with closed top) including all necessary GI fittings note- (1) Extra GI pipe required to be measured & paid seperately

Supply & Fix rotational moulded polythene water tank 1000 lit cap (cylidrical verticle with closed top) including all necessary GI fittings note- (1) Extra GI pipe required to be measured & paid seperately

Supply & Fix rotational moulded polythene water tank 2000 lit cap (cylidrical verticle with closed top) including all necessary GI fittings note- (1) Extra GI pipe required to be measured & paid seperately

M&L for draining water from OH reservoirs not exc. 16 Mtr head/staging, and cleaning internal portion of tank (bottom and walls) by means coir / wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc 50 mtr including one coat of synthetic enamel paint on all steel surfaces such as ladder, railing, inlet & over flow CI pipes connected sluice valves of the 400000 gallons capacity OH tanks/ground level reservoir etc writing letters with white paint (date of cleaning and capcity of tank) on black painted surface of tanks all as directed by Engineer-in-Charge.

All as per item No 110 above but the 325000 gallons capacity

All as per item No 110 above but the 100000 gallons capacity

All as per item No 110 above but the 50000 gallons capacity

All as per item No 110 above but exc 16 Mtr head / staging 100000 gallons capacity

All as per item No 110 above but exc 16 Mtr head / staging 75000 gallons capacity

All as per item No 110 above but exc 16 Mtr head / staging 50000 gallons capacity

All as per item No 110 above but exc 16 Mtr head / staging 100000 ltrs capacity

All as per item No 110 above but ground level reservoir of 100000 gallons cap each tanks devided in two poriton

M&L for 25000 gallons capacity dewatering the water from settling tanks by using monoblock pump set and clean the internal surfaces of walls by means of coir / wire brush etc and after removal of sludge / mud to a distance not exc 50 mtr and clean the internal surface by clean water and two coats of synthetic enamel paint on all steel surface such as ladder, railing and CI pipes including valves all as specified and directed by Engineer-in-Charge

All as per item No 119 above but the 36000 gallons capacity

All as per item No 119 above but UG Sump 250000 gallons capacity

All as per item No 119 above but UG Sump 100000 gallons capacity

All as per item No 119 above but UG Sump 100000 ltrs capacity

All as per item No 119 above but UG Sump 50000 ltrs capacity

Disconnecting existing 500 ltrs tanks setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position (Cleaning, repairing etc measured seperately)

All as per item No 125 above but the 1000 ltrs

All as per item No 125 above but the 2000 ltrs

Cleaning and removing all scale and dirt etc from 500 ltrs tanks and from mouths of circulating pipes etc.

All as per item No 128 above but 1000 ltrs

All as per item No 128 above but 2000 ltrs

Locate the any kind of fault in water pipe line of any size and any type by digging only with JCB along the length of any type of water pipe line and upto the depth from 1.5 to 3 mtr as required at site in any type of soil of water pipe line bottom to locate the exact pin point location of fault including rectification of fault with the help of plumber, returning and filling of same by tightening the union,replacing elbows,sockets,tees,nipple, checknut,lead jonits,flanged joints etc complete all as directed by Engg-in-charge. Note 1.Items required to replace shall be measured and paid seperately.

Taking out burnt starter panel and Supply & fix pannel for soft starter 150 HP including following items 1.semiconductor fuse- 3 nos, 2.push button- start/stop -2 nos , 3. indication run/trip- 2 nos , 4. indicating lamp RYB- 3 nos, 5.relay card 4 channel-01 nos ,6.MFM 4400 LCD meter CI 1 cat no WC440010OOOO, 7.CT- 3 nos , 8. cooling fan and tubelight-01 nos , 9. pannel wiring, 10. accessories ,Al Bus bar and terminals of suitable capacity ,11. panel with angle 450 mm angle iron base, 12. MMCCB 400Ammps 50 KA, 13. Contactor MNX suitable for 150 HP motor.

Taking out unesreviceable motor starters and Supply & fix soft starter 6 wire built in bypass 150 HP 180 A Cat No EMX4i-0250B-511 MAKE -L&T Legrand or equivalent.

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 1,55,795.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

UNITED ENTERPRISES

Kaushalya Buildcon

DURGAI ELECTRICALS

Bidder Name

UNITED ENTERPRISES

DURGAI ELECTRICALS

P C DAVE AND SONS

Kaushalya Buildcon