Renovation of Revenue Department Staff Chamber, Office Rooms at 3rd Stage, West Wing 5th Floor, M.S Building, Bengaluru

Renovation of Revenue Department Staff Chamber, Office Rooms at 3rd Stage, West Wing 5th Floor, M.S Building, Bengaluru

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...

Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...

Repairing door and window frames with available wood to the required

Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as ...

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plasterin...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing Sal wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexpos...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to ...

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 100 mm length

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and of...

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with ...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

Fabrication and fixing of Office table of size 2.0x0.75x0.75=1.125 Sqm. made out of 19mm sandwiched plywood finished all exposed surfaces by using thickapproved veneer and all edges lipped with teakwo...

Supplying and fixing single unit Mobile Pedestal made out of 18mm thick Pre-Laminated board of approved texture finished over exposed area, inside finished with 0.8mm white laminate, Provisioned with ...

Providing and Supplying of Executive Table finished with Approved Laminate with Right Side Cabinet includes 2 Drawers with Lock 1 Swivel Door with CPU Space includes Alloy Wire box with Cable Manager ...

Providing and fixing 2 sharing work station of size 1200 mmx1200mmx750mm (one work station is 1200mmx600mm 750mm) consisting of back to back unit made of 40mm thick particle board covered with laminat...

Supplying and providing Visitors chairs with fixed arms with sledge base of featherlite, Godrej or equivalent make, including the cost of all materials, labour and transportation lead lift etc., as pe...

Providing and Supplying of Executive Medium Back Mesh Chairs with multi lock, gas lift of optima series of featherlite/Godrej or equivalent make, including the cost of all materials, labour and transp...

Providing And Supplying High Back Chair genuine Leather Upholstery, White PP Seat Shell, Alu. Alloy 5 star Base, high Adjustment and Synchro tilt Mechanism with Multi Position Locking And Automatic Te...

Providing and Supplying Medium Back Revolving chairs with Mesh Back And Soft Cushioning Seat, Fixed lumber Support and Gas Lift, Knee tilt Mechanism of featherlite/ Godrej or equivalent make, includin...

Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 25mm thick water proof block board for shutter and 19mm plywood for allround ward robe, openable shutters with 25mm x 6mm thick...

Supplying and fixing Medium back Leatherette Chairs with knee tilt, with Gas Lift, Lumber support of featherlite/Godrej or equivalent make, including the cost of all material, labour and transportatio...

Supplying and fixing High back Leatherette Chairs with knee tilt, with Gas Lift, fine tuning adjustment, Lumber support of featherlite/Godrej or equivalent make, including the cost of all material, la...

Supplying and fixing 2 Seater Black PVC cushioned with arms Featherlite/Equivalent Make, including cost of all materials, lead and lift loading and unloading and labour charges for the successful comp...

Supplying And Fixing Single Seater fabric Sofa with Wooden handrest of Featherlite or equalant Make.Complete, including cost and conveyance of all materials, labour for all items of work, HOM of equip...

Supplying 3 seater stainless steel public seating chair SJ-820A - 3 seater Tandem with black pvc of Featherlite or equivalent make, complete as per specification. The work includes cost of all materia...