Construction of 2 Lakhs litre Sump

Amount

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard red earth, shales, murrams, gravel, hard rock not requiring blasting ete complete., FOR 1ST DPETH ALL SOILS

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard red earth,shales, murrams, gravel,hard rock not requiring blasting ete complete., FOR 1ST DEPTH SDR

Earth work excavation for foundation in all soils such as red earth, hard stiff clay soil, stiff black cotton soil, hard red earth,shales, murrams, gravel,hard rock not requiring blasting ete complete., FOR 1ST DEPTH DMR NOT REQUIRING BLASTING

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard red earth,shales, murrams, gravel, hard rock requiring blasting ete complete., FOR 2ND DEPTH HARD ROCK BY BLASTING

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard red earth,shales, murrams, gravel, hard rock requiring blasting ete complete., FOR 2ND DEPTH HARD ROCK BY BLASTING

Levelling coarse in cement concrete 1:4:8 mix using 40mm hard broken stone for foundation and leveling coarse including cost of all materials, mixing, placing, ramming, curing, finishing etc., complete. Below 1.5m - 4.5m For foundation

Reinforced Cement Concrete M 30 mix using Machine crushed HBG stone for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete. 0 - 1.5m below GL For base slab, haunches, sidewall, column

Reinforced Cement Concrete M 30 using Machine crushed HBG stone for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete. From 0 m to 4.5m above GL For column head, sidewall, Haunches

Reinforced Cement Concrete M 30 using Machine crushed HBG stone for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete. Beyond 1.5m & upto 4.5m below GL For Base slab

Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25 X 25 X 3mm for boarding laid over Silver Oak joists of size 10cm X 6.5cm space at 10cm c/c and supported by Casurino Props 10cm - 13cm spaced at 75cm c/c etc., complete

Centering for 0.00 M to 03.30 M (Above 1.00 LL Capacity) For Baseslab, Side Wall, Column, Col.Head (CURVED SURFACE)

Centering for 3.30 M to 04.30 M (Above 1.00 LL Capacity) (CURVED SURFACE)

Centering for 4.30 M to 5.30 M (Above 1.00 LL Capacity) (CURVED SURFACE)

Centering For 0.00 M to 3.30 M (PLANE SURFACE)

Centering For 3.30 M to 4.30 M (PLANE SURFACE)

Centering For 4.30 M to 5.30 M (PLANE SURFACE)

Centering For 0.0 M to 3.30 M (FOR SQUARE COLUMN)

Centering For 0.00 M to 3.30 M (FOR ROUND COLUMN)

Supplying, fabricating and placing in position of RTS rods for reinforcement including cost of steel and binding wire, labour charges etc., complete for RCC works and as directed by TWAD Board Officers. For RCC Works

Providing pipe connection work for SR.Rate including supply & laying of pipes, specials and valves etc., complete and as directed by TWAD Board Officers. For Inlet,Over Flow arrangement

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supply, Delivery and fixing of MS angle Manhole frame with cover of following size including cost of all materials, fixing of MS clamps,Bolt and nuts etc.,complete. Size 0.60m x0.60m

Supplying and fixing in position of RCC (1:1.5:3) in side access lader of following size using 20mm size HBS jelly including cost of all materials, centring, shuttering,strutting, fabrication and placing in position of reinforcement, finishing, curing etc., complete and as directed by TWAD Board Officers. For the sump

Refilling the foundation with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification and as directed by TWAD Board Officers.For the sump site

Provision for supply & fixing of MS ladder including Painting etc. complete.

CONSTRUCTION OF PUMP ROOM

Earth work excavation for foundation in all soils such as red earth, hard stiff clay soil, stiff black cotton soil, hard red earth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,For Foundation

Cement concrete 1:4:8mix using 40mm gauge hand broken granite stone jelly for foundation including watering wherever nessary and laid in layers not more than 10cm thick completed etc, complete

Random rubble masonry in CM 1:5 mix using rough stone and bond stone including cost and conveyance for all labour chrges etc.,

Brick work in CM 1:5 mix using country bricks of size 8 ¾ " x 4 ¼" x 2 ¾" including curing neat finishing, etc., complete complying with standard specifiction.

Filling basement with excavated earth in layers well rammed watered and compacted complete as per standard specification including all labour charges etc complete

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Supplying, fabricating and placing in position of the following dia of Mild steel grills/Ribbed for steels for reinforcement for all reinforced cement concrete works including cost of steel, binding wires, tying, bending fabricating the reinforcement gril

R.C.C. 1:1.5:3 mix using 20mm ISS gauge machine broken HBG metal for RCC works excluding cost and abrication off reinforcemnet and centering shuttering charges but including curing and provideing fixtures like fan clamps in the RCC floor or Roof wherever necessary and including cost and conveyance of all materials etc, complete.

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Labour charges for fixing door along with frames in position etc., complete

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 mix 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Plastering in CM 1:3mix, 10mm thick for finished with neat cement including band cornice, scaffolding curing etc., complete in all respects, as directed by the departmental officers

Plastering in CM 1:5mix, 12mm thick for finished with neat cement including band cornice, scaffolding curing etc., complete in all respects, as directed by the departmental officers

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coat of new iron works such as steel Doors, windows, ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc,

Supply and Fixing of 63 Amps TPN Metal clad switch with rewirable fuse units TRIPLE POLE SWITCHES (SIDE HANDLE) including cost and conveyance of all labour charges etc and complete

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 69

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD 65

Supply and fixing of 32A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW board with earth connection only SD 142

Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 83

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) SD 20

EXTENSION OF PIPE LINE WITH SUBMERSIBLE PUMP

Earth work excavation in a Narrow trench for laying pipe line with initial lead of 10M and lift of 2.00m in Hard stiff clay, stiff Black cotton soil, Hard red earth, shales, Murrams and earth mixed with small size boulders etc as per SS 20B as per TWAD Schedule of Rate.

Supply and delivery of the following size of 6ksc 110mm dia PVC Pipes including all labour charges etc.,

Supply and delivery of the following size of 4ksc 90mm dia PVC Pipes including all labour charges etc.,

Conveying the PVC pipes and specials to trench lowering into the trenches, laying to proper grade and alignement, jointing with PVC Coupler and specials fixing with cement paste and testing to the required pressure as per IS including conveyance of water from 1 KM lead for filling during testing as per TWAD Schedule of rate.

Refilling with excavated soil complying with standard specification in layers of 15 cm thick well rammed and consolidated after the pipes and specials are laid and tested.

Drilling 150mm dia deep bore well in hand rock area including all conveyance charge and all labour charges etc complete.

Supply and delivery of Following 150 mm pvc casing pipes including conveyance charges etc..complete.

Supply and delivery of Three Phase 10 HP submersible motor for 150mm dia Bore well with 75X225 Head including cost and conveyance etc complete.

Supply and delivery of Three Phase 10 HP submersible motor Panel Board including cost and conveyance etc complete

Suplly and delivey of 50 mm GI pipe for Bore well including cost and conveyance of all labour charges.

Supply and run of PVC Insulated and Sheathed 3 Core Flat Type Copper Cable Conforming To Is 694/1990 and as amended thereafter including all labour charges etc complete.

Labour charges for erecting of Three Phase 10 HP submersible motor including all labour charges etc complete (P.320)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

shree and co (BID ID -1214848)