Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹40.0 L+₹9.0 L (29.1%)Rejected-AOC | L2 | Rejected-AOC Rejected other than L1 | |
| 3 | L3₹40.1 L+₹9.2 L (29.6%)Rejected-AOC | L3 | Rejected-AOC Rejected other than L1 | |
| 4 | L4₹41.7 L+₹10.8 L (34.7%)Rejected-AOC | L4 | Rejected-AOC Rejected other than L1 | |
| 5 | L5₹59.5 L+₹28.6 L (92.2%)Rejected-AOC G 58 KIRAN GARDEN UTTAM NAGAR NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L5 | Rejected-AOC Rejected other than L1 |
| Sl No | Description | Qty | Unit | H.B. Traders L3 | Sumit Enterprises L5 | kailash chawla L2 | GIR RAJ BUILDERS L1 | VIJAY KUMAR GUPTA L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Schedule-A | ||||||||
| 1.01 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge. | 100 | Each | 50 ₹5,000 Lowest | 300 ₹30,000 | 50 ₹5,000 Lowest | 100 ₹10,000 | 100 ₹10,000 |
| 2.00 | All as per Item No 1.01 but exceeding 1.50 sqm each and n.exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge. | 60 | Each | 50 ₹3,000 Lowest | 300 ₹18,000 | 50 ₹3,000 Lowest | 120 ₹7,200 | 100 ₹6,000 |
| 3.00 | Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each , complete all as specified and directed by Engineer-in-Charge. | 100 | Leaf | 50 ₹5,000 Lowest | 50 ₹5,000 Lowest | 50 ₹5,000 Lowest | 100 ₹10,000 | 100 ₹10,000 |
| 4.00 | S&F 35 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both the faces.complete all as specified and directed by Engineer-in-Charge. | 100 | Sqm | 1,350 ₹1,35,000 | 2,400 ₹2,40,000 | 1,000 ₹1,00,000 Lowest | 1,500 ₹1,50,000 | 1,500 ₹1,50,000 |
| 5.00 | Taking Down of old shutter exc 1 sqm and n exc 2 sqm each including ,easing and adjusting and refixing in same opening complete all as specified and directed by Engineer-in-Charge. | 100 | Per Leaf | 50 ₹5,000 Lowest | 50 ₹5,000 Lowest | 70 ₹7,000 | 100 ₹10,000 | 100 ₹10,000 |
| 6.00 | Taking Down of old steel shutter Welded steel wire fabric exc 1 sqm and n exc 2 sqm each ,easing and adjusting and refixing in same opening repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of fittings and refixing on the same opening complete all as specified and directed by Engr-in-Charge. (Note:- New hinges, if required will be measured and paid under separate item). | 100 | Per Leaf | 100 ₹10,000 Lowest | 700 ₹70,000 | 100 ₹10,000 Lowest | 500 ₹50,000 | 100 ₹10,000 Lowest |
| 7.00 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,& incluing taking down of old window of any description ,complete all as specified and directed by Engineer-in-Charge. | 60 | Sqm | 8,000 ₹4,80,000 | 8,000 ₹4,80,000 | 5,000 ₹3,00,000 Lowest | 5,000 ₹3,00,000 Lowest | 7,000 ₹4,20,000 |
| 8.00 | S&F in repair Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. | 250 | Kgs | 550 ₹1,37,500 | 600 ₹1,50,000 | 500 ₹1,25,000 | 400 ₹1,00,000 Lowest | 500 ₹1,25,000 |
| 9.00 | S&F in repair Anodised aluminium window and ventilator shutters, side hung type or sliding without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-Charge. | 52 | Sqm | 3,200 ₹1,66,400 | 6,000 ₹3,12,000 | 4,000 ₹2,08,000 | 3,000 ₹1,56,000 Lowest | 4,000 ₹2,08,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
10 Jun 2026, 6:00 pmClosed
GE (AF) Gurgaon No 1
GE (AF) Gurgaon No 1 Near Atul Kataria Chowk Gurgaon
CA NO. GE AF NO.1 / GUR-14 / 2026-27 REPAIRS /REPLACEMENT OF WOODEN AND STEEL JOINERY ,WINDOWS, DOORS, FIRE EXIT DOORS, AND OTHER CONNECTED SERVICES IN BLDG NO 144 TO153 AT SEKHON VIHAR UNDER GE (AF) GURGOAN NO 1
2026_MES_766235_1
GE(AF) No 1/GUR-14/2026-27
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) Gurgaon No 1
All as per NIT
10 documents required · 10 mandatory
₹500
GE (AF) Gurgaon No 1
₹90,000
Yes
29 Jul 2026
19 May 2026
12 Jun 2026
19 May 2026
10 Jun 2026
3 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Schedule-A | |||||
| 1.01 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge. | 100 | Each | - | - |
| 2 | All as per Item No 1.01 but exceeding 1.50 sqm each and n.exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge. | 60 | Each | - | - |
| 3 | Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each , complete all as specified and directed by Engineer-in-Charge. | 100 | Leaf | - | - |
| 4 | S&F 35 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both the faces.complete all as specified and directed by Engineer-in-Charge. | 100 | Sqm | - | - |
| 5 | Taking Down of old shutter exc 1 sqm and n exc 2 sqm each including ,easing and adjusting and refixing in same opening complete all as specified and directed by Engineer-in-Charge. | 100 | Per Leaf | - | - |
| 6 | Taking Down of old steel shutter Welded steel wire fabric exc 1 sqm and n exc 2 sqm each ,easing and adjusting and refixing in same opening repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of fittings and refixing on the same opening complete all as specified and directed by Engr-in-Charge. (Note:- New hinges, if required will be measured and paid under separate item). | 100 | Per Leaf | - | - |
| 7 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,& incluing taking down of old window of any description ,complete all as specified and directed by Engineer-in-Charge. | 60 | Sqm | - | - |
| 8 | S&F in repair Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. | 250 | Kgs | - | - |
| 9 | S&F in repair Anodised aluminium window and ventilator shutters, side hung type or sliding without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-Charge. | 52 | Sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
BOQ_858149.xls
BOQ • 0.85 MB
TenderDocument14.pdf
Tender Documents • 1.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .