Renovation of Municipal Committee Office building at Basohli.

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms, including getting out the excavated earth and disposal of surplus excavated earth as directed, including all leads and lift. a) All Kind of soil.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Labour engaged for demolishing / dismantling of old ceramic tiles in bath rooms incl. disposal of demolished material outside as per direction of Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement)3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing of partition wall using aluminum channels with ACP sheet and glass of 4’-0” and 3’-0” height respectively incl. door opening with all accessories i.e. Handle, tower bolt and Arl (5mm thick glass).

Providing and fixing of 8mm thick glass shelf with supporting brackets.

Providing and laying PVC soil waste pipe including bed concrete and all iround PVC pipe as per standard design (Prince, finolex, superme make of 4 kg / cm² pressure. A) 110mm dia.

Providing and fixing PVC loose collar (surpreme / prince make). (i) 110mm dia

Providing and fixing PVC plain bend (surpreme / prince make). (i) 110mm dia

Cutting holes upto 15x15 cm in R.C.C floors and roofs for passing drain pipe etc. and reparing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof (including all leads and lifts carriages of material by MT/HL)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fitting and fixtures, complete including cutting and making good the walls and floors wherever required: W.C.pan of Hind ware / Cera make with ISI marked white solid plastic seat and lid.

Providing and fixing white vitrous china flat half stall urinal basin of (580x380x350) mm with white PVC automatic flushing cistern of approved make.

Providing and fixing wash basin with CI / MS brackets (without pillar taps) 32mm C.P. brass waste coupling Flat back wash basin size (630x450)mm with taps.

Providing and fixing white vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

Providing and fixing chilli or jaguar make of approved quality and standard specifications.

(i) 15mm C.P. basin mixture CON-CHR-167 KNB

(ii) 15mm long nose C.P. bib cock CON-CHR-107 KN

(iii) 15mm short body C.P. bib cock CON-CHR-011 KN

(iv) 15mm C.P. extension nipple.

(v) 15mm C.P. flange Cup

Providing and fixing 32mm dia PVC waste pipe for sink or wash basin including PVC waste fitting complete. Flexible pipe.

Providing and fixing (600x450) mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88gms.

Providing and fixing stainless steel A ISI 304 (18x18) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required.Kitchen sink with drain board. i. 510x1040mm bowl depth 250mm.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Kathua for an average lead of 80.00 Km. by M.T. b) Stone aggregate (Crusher bajree) below 20mm nominal size from Kathua for an average lead of 80.00 Km. by M.T.

M/s. Sohan Lal

Narinder Pal Raina

Zoraber Singh Govt Contractor