MAINTENANCE OF FLOOR TILING, WALL TILING, ROOF, FALSE CEILING, CHAJJA, ROOF TREATMENT, ETC AND PERIODICAL SERVICES INCLUDING TREATMENT TO EXPOSED REINFORCEMENT OF BLDGS, COMPOUND WALLS OF HATIALI, LAIPULI AND PANITOLA AREA UNDER GE DINJAN

Amount

Demolition of unreinforced cement concrete as in roof, floors (other than ground floors), beams, staircases, landings, chajjas etc complete all as specified and as directed.

M&L for PCC (1:2:4), type B0 ( using 12.5 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for reinforced cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, etc complete all as specified and as directed.

S&F for mild steel TMT steel bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for TMT steel bars 6 to 8mm dia, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exceeding 6 m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete all as specified and as directed.

Taking down chowkats or frame exceeding 1.5 Sqm and not exceeding 4.00 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frame not exceeding 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0 Sqm each complete all as specified and as directed.

Refixing shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each in the same opening complete as directed.

Refixing shutters of any description not exceeding 1.0 sqm each in the same opening complete all as specified and as directed.

S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed by Engr-in-Charge.

S&F for well seasoned second class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints including treating the timber libarally brushed at least twice with oil or kerosene based solusion of chlorophyrifos 20EC 1.0 % (by weight) concentration complete all as specified and as directed.

S&F 35 mm thick, second class hard wood, glazed and skeleton shutters with open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a), complete all as specified and as directed.

M&L for 35mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of 12mm thick veneered particle board medium density with commercial face veneers: supplied and fitted to chowkats, sizes/section of members of shutters shall be as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and as directed.

S&F for 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded as specified in SSR Part I Section 8 clause 8.24 (b) complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00mm and fixed with wooden bit or stainless steel wire staples as required complete all as specified and as directed.

S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for aluminium anodised, window and ventilator shutters, fixed type, with or without sash bar, using aluminium section weighing not less than 0.55Kg per metre including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium handles 2 numbers in each shutter, hinges, anodised aluminium snap beading, screws etc complete all as specified and as directed. Note : (a) Thickness of aluminuim section shall not be less than 1.5mm. (b) Glass will be measured and paid separately.

M&L for anodised aluminium frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

S&F for 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane incl hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs 5.5 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for mild steel small articles using flat iron of size 25x6mm thick such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290, (Gde E-165) complete all as specified and as directed.

S&F for 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for 75mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for 300 mm long, mild steel, sliding door bolts, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, etc complete all as specified and as directed.

S&F for 150 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish complete all as specified and as directed.

S&F for 125 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish complete all as specified and as directed.

S&F for 125 mm size, aluminium handles, cast type, anodised to a bright natural, mat finish complete all as specified and as directed.

S&F for 150 mm size, auminium handles, cast type, anodised to a bright natural, mat finish complete all as specified and as directed.

S&F for aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm anodised finish complete all as specified and as directed.

S&F second class hardwood small fitting such as brackets of any type, latch and hinge blocks, shapes door and window stops and the like including all necessary labours, articles not exceeding 200 Cu.cm complete all as specified and as directed.

S&F 100 mm long aluminium anodised hasp & staple, safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair aluminium (die cast body) door closer hydraulically regulated, designation No.3, universal type suitable for shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

S&F for rolled mild steel work as in roof truss (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleat etc. steel section Conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde (E-165) complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position, unframed work complete all as specified and as directed.

Dismantling timber works in fillets,rail, post, rafter, purlins etc under 40 Sq.cm in section (unframed work), in any position complete all as specified and as directed.

S&F for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exceeding 3 Sqcm and not exceeding 6 Sqcm complete all as specified and as directed.

M&L for second class hard wood plain fillets, square or rectangular in section, exceeding 3.00Sqcm and not exceeding 6.00Sqcm in cross sectional area, bullnosed, splayed, chamfered or rounded on one edge or face fixed with screws complete all as specified and as directed.

M&L for second class hardwood, scantlings, wrought, timber framed and fixed complete all as specified and as directed.

Dismantling of asbestos cement (corrugated or semi corrugated) sheets in roof coverings including ridges complete all as specified and as directed.

S&F for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, etc. and fixed with 'L' type or 'J'-type or cranked hook bolts, complete all as specified and as directed.

S&F for 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with 'L' type or 'J' type hook or cranked hook bolt with washer complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridge shall be same colour as that of sheet used for roof.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets and frame work any type complete all as specified and as directed.

S&F for aluminium anodised snap grid frame work of size 605mm x 605mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of distemper oil emulsion complete all as specified and as directed.

S&F GI frame work for false ceiling seamless comprising of galvanised iron perimeter channel 0.55mm thick with two unequal flangeds of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermadiate channel 0.90mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre using 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 08mm thick seamless calcium silicate ceiling made out of 1800mm X1200mm size board of siliceous and calcareous materials reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and as directed.

M&L for seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 20 mm thick in two layers (10mm + 10mm) on fair faces of brick work or concrete surfaces in cement mortar (1:4) and top layer of 10mm thick mixed with integral water proofing compound weight of cement as per manufacturer's instructions and finished surface even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately against relevant item.

M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. over 10 mm thick back coat of cement mortar in (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.

M&L for glazed ceramic, coloured tiles of size 450X 300X 7 mm thick , on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortar (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for vitrified ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.

M&L for granite stone slab (of any type) 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed or bedding in cement mortor (1:6) and cutting, polishing complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) complete all as specified and directed.

M&L for hard core of broken stones of guage not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor, etc complete all as specified and as directed.

M&L for 75mm thick, PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in floor finished , even and smooth using extra cement incl spik rolling to surface or making expressions of expended metal, whilst the concrete is green complete all as specified and as directed.

M&L for prepolished chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, as in floors etc, including 15 mm thick screed bed or bedding in cement mortar (1:4) and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in floors laid in panels, finishing the surfaces even and smooth with using extra cement complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 50mm thick, plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding / levelling course with WPC as per manufacturer's instructions complete all as specified and as directed. Note : WPC shall be measured and paid separately.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, etc including necessary form work complete all as specified and as directed.

Taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

Taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete obtained from item above respectively as directed.

Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete obtained from item above respectively as directed.

S&F in repair top cover for water storage tank of any capacity, the colour of cover shall be matching with the existing tank's colour complete all as specified and as directed.

M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 250 Liters n.exc 500 Liters complete all as specified as directed. Note : (i) On completion of cleaning of tank, date of cleaning to be marked/ written clearly on tank surface in an accessible location with letters or figures n.exc 5 cm high viz (as per example) "TANK CLEANED ON……...….….". "NEXT DUE ON ............................" (ii) Cleaning of tank to be carried out in accordance with the schedule published for the purpose of cleaning of tank. (iii) During cleaning of the tanks, any vegetation and growth on the roof slab shall also be removed by the Contractor and the quoted rates are deemed to include for the same.

All as per Sch 'A' Item No. 83 here in above but capacity exc 500 Liters and n.exc 1000 Liters.

All as per Sch 'A' Item No. 83 here in above but capacity exc 1000 Liters and n.exc 2000 Liters.

S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe including 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repair for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe including 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repair 20 mm bore, ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repair 15 mm bore, bib taps, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repair 15 mm bore, bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferule complete all as specified and as directed.

S&F in repair 15 mm bore, stop valves (concealed type), cast copper alloy, chromium plated, long sunk and cup, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair 15 mm bore, stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F for 15 mm bore, pillar taps, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F for 15mm dia two way bib cock complete all as specified and as directed.

S&F in repairs 15mm dia angular stop cock with flange complete all as specified and as directed.

S&F in repairs 15/20mm bore, bib taps of PTMT, any colour high pressure, screwed for iron pipe and fixed (minimum weight 90 gms for 15 mm / 125 gms for 20mm) complete all as specified and as directed.

S&F in repair brass cast copper alloy chromium plated shower rose, 125mm size with shower arm 15mm size, 195mm long with bend of 45 degree with flange complete all as specified and as directed.

S&F in repair 20 mm bore, brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and as directed.

S&F in repair stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, with 32mm bore PVC (HDPE) waste pipe 450mm long, 32mm bore CP waste coupling, chain, plug and porcelain stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed.

S&F in repair, plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china bowl urinal bowl type, of size 465x355x265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern but including flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and as directed.

S&F in repair vitreous china wash basin of size 580x450mm, white, flat back, excluding taps, waste pipe, chain, plug and porcelean stopper but including backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed.

S&F in repair CP health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs PVC low level flushing cistern, 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor using concrete (1:2:4) type B0 and to match with existing specifications complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (closed pattern), wall hung EWC/white/ivory/off white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, including flushing cistern and flush pipe complete all as specified and as directed.

S&F for mixer wall mounted with long arms complete all as specified and as directed.

S&F for LDPE pipe as waste pipe 32 mm dia wash basin complete all as specified and as directed.

S&F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repairs PTMT(half or full threaded) waste coupling 32mm for sink (min weight 32mm - 45gms) complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of clearcholle primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for one coat of white wash on old decorated surfaces of walls, cornices including preparation of surfaces complete as specified and as directed.

M&L for one coat of white wash on old decorated surfaces of ceilings including preparation of surfaces complete as specified and as directed.

M&L for preparation old decorated plastered or unplastered surfaces, Washing, rubbing down and stopping of distempered and painted surfaces by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moss, efflorescent, having oil and greases spots and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moss, efflorescent, having oil and greases spots and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition and breaking up to 100mm bore drain pipes including fittings (AC/PVC) set in cement mortar complete all as specified and as directed

Demolition and breaking up to 75mm bore drain pipes including fittings (AC/PVC) set in cement mortar complete all as specified and as directed

S&F for 110 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and as directed.

S&F for 75 mm bore, PVC (SWR), Type 'B', soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F for 75 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F for 75 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) vent cowl fixed with solvent cement complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls, cornices etc by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying two coat of white wash including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceilings by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls, cornices etc by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying two coat of colour wash including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of distemper-oil-emulsion including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceilings by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of distemper-oil-emulsion including necessary scaffolding complete all as specified and as directed.

M&L for preparation old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying two coat of cement base paint (white or tinted) including necessary scaffolding complete all as specified and as directed

M&L for preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint including necessary scaffolding complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint including necessary scaffolding complete all as specified and as directed.

M&L for complete removal of existing treatment on wall surfaces and filling cracks with 3mm thick wall care putty and applying two coats of distemper oil emulsion over a coat of primer including necessary scaffolding complete all as specified and as directed.

M&L for complete removal of existing treatment and filling cracks with filler materials as per manufacturer's instructions, including washing the surface with water including necessary scafolding as per site requirement and applying two coat of exterior emulsion paint ( weather coat) over a coat of primer of same manufacuterer of existing treatment upto the height of 7.5m including necessary scaffolding complete all as specified and as directed.

Demolition of reed, lathing, single or double including battens and plaster or chicken wire lathing complete all as specified and as directed.

M&L for GI wire netting of 0.90mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceilings etc including all laps, cutting and waste fixed with tinned tacks of wire staples complete all as specified and as directed.

M&L for rendering 15 mm thick on one side of lathing in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on other side of lathing in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of any description, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of any description, not otherwise described, any width or girth and applying two coats of cresote oil complete all as specified and as directed.

M&L for writing letters or figures (Block ,Roman, Italic or Indian) not exceeding 30 cm height with synthetic enamel paint complete all as specified and as directed.

M H KHAN

CHETIA CONSTRUCTION

M/S N K SAI TRADING

R.D.CONSTRUCTION

Bimal Trading Company

NChetia and Sons Trading

FREEZCON