Design, fabrication, installation, testing and commissioning of automatic starter cum control panel with 1 incoming and 3 no. outgoing feeders along with auto starter panels for 3 no. pumping units along with cables and other allied electromechanical

Amount

Dismantling of cable connections from LT terminals and from 100 KVA transformer and removing the 4 nos. burnt cables from transformer to LT terminals after getting the HT supply disconnected. Providing and installation of one no. LT Fuse link set consisting of minimum 40 mm MS angle, MS flat, drilling holes aluminum bus bars/L clamps, D type shackle insulators , nut bolts, fuse wire, drilling holes Clamps and fixing. Job also includes proper erection of MS angle frame either to be fixed on pole or properly embedded on ground with PCC. P/Fitting of 50sq. mm copper cable 12 mtrapprox or equivalent after stripping the cable ends, P/F thimble by crimping tool and giving connections to transformer and LT fuse link set. Fitting of the aluminium service cable to the LT junction after cutting & stripping the cable ends. The job includes cost of material, thimbles, insulators, bus bars, supporting angle arms, nut bolts, washers, clamps, insulation tape, , labour, transportation charges etc.

Providing and fitting of electrical wiring at LIS Karnailachak by way of point wiring for three no. light points and two no. flood lights with 1/1.5 sq mm or equivalent copper cable for light / fan points / socket points inside and outside pump room building in casing / caping or surface conduit. The job also includes providing and fitting of switch board, switches, sockets, holders, back sheets, LED bulbs and other fittings required for the purpose. Providing and fitting bulb holder-03 no., switches, sockets, LED bulbs-03 no., switch board-1 no., led flood light 30 watt-02 no. standard make along with support stand for safety of workers. The job includes providing and laying of 04 sq. mm multistrand copper cable(neutral)-10 mtr approx. from transformer to main switch board and providing and fitting of 16 ampere SPN-01 no. Job includes fastening of cables/conduits by using wooden/plastic gutties/gang boxes, screws, clamps, drilling holes in the walls for crossing of the cable and other works required for execution of the job. The job includes cost of all sort of material, hire charges of tools and tackles required for the job including labour and carriage charges.

PERFECT ELECTRICAL WORKS

M/S FASTTRACK ENGINEERS