REPAIR TO BOUNDARY WALL, GATE LEAKAGE/ SEEPAGE TO ROOF, JOINERY PLASTER WORK AND MISC WORK, ROAD PATH AND CULVERT AT HALDIA UNDER GE (I) (CGN) KOLKATA

Amount

Dismantling of wrought or mild steel work of any description such as in ladder work, bracing/supporting agle iron, roof top MS sheets, railings complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including any pattern roof coverings complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified and as directed by the Engr-in-Charge.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by the Engr-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed..

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any position below or above ground floors, not exceeding 15 cm in depth complete all as specified and as directed.

Material and labour for reinforced pre-cast RCC (1:2:4) type B-1 (using 20 mm graded aggregate) 75mm thick, drain cover slab, set in cement mortar (1:4) including all necessary form work complete all as directed Note : Reinforcement shall be paid seperatly.

Material and labour for mild steel TMT bars, 10mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified and directed.

Material and labour for Providing cement concrete type B-1,1:2:4 (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and directed.

M & L for brick work with fly ash bricks of class designation 7.5 as per IS 12894: 2002, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for fabrication of MS angle iron post or posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by the Eng-in-Charge.

Supply & fixed in repairs for 2.24mm dia 2 strand galvanised steel barbed wire with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard railing strainning both including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pin etc after and including dismantling of existing unserviceable barbed wire complete all as specified and as directed by the Engr-in-Charge.

Supply & Fixing in repair stainless steel concerntina coil fencing with punched tape concerntina coil 600mm dia 10 mtr openable length (total length 90mtr), having 50 nos round per 6 mtr length upto 3 mtr heigth of wall with 9 horrizsontal RBT reinforced barbed wire, stud tied with GI satples and GI clips to retain horrizontal, including nessesary bolts or GI barbed wire tied with angle iron complete all as specified and as directed

Material and labour for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats cement base paint over one coat of primer complete all as specified and as directed.

Material and labour for prepartion of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge.

Preparation of newly or previously untreated steel surface of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old surfaces of wall by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement base paint complete all as specified and as directed.

Taking down existing treatment of any description and any layer from roof including scraping and roughening old by picking, sweeping clean and washing down complete all as specified and as directed.

Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B1 using 20 mm nominal size graded crushed stone aggregate as in floor 40 mm thick finished even and fair complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and as directed by the Engr-in-Charge.

Material and labour for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and providing 10 mm thick cement plaster in CM (1:4) using water proofing compound @ 3 % by weight of cement for filling depression if any to receive water proofing treatment and providing APP modified bituminous membrane water proofing membrane with polyester reinforcement and mineral finish of thick (not less than 5.1 kg/sqm ± 10% per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sqm by the same membrane manufacture of density at 25 C, 0.87-0.89 kg/litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints complete all as specified and as directed by Engineer-In-charge (Note : WPC shall be measured and paid separately)

Taking down aluminium window of any description and in any position and removing from site complete all as specified and as directed .

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from work site complete all as specified and as directed

Taking down wooden door shutter area exceeding 1.00 but not exceeding 2.00 sqm each complete all as specified and as directed.

Taking down and refixing in same opening wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed by the Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both facesomplete all as specified and as directed by Engr-in-Charge.

Supply and fixing for 35mm thick 2nd class hard wood glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

Supply and fixed solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening all as shown on drawing and specified .

Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening for moulded door all as shown on drawingand specified and as directed by the Engr-in-Charge.

Supply and fixed factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

Supply and fixed factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engr-in-Charge.

Material and labour for easing adjusting of aluminum window and refixing of shutter section with screw including replacement of unserviceable locking arrengment, stay hook and nessessary neoprene beading comp all as spd and as directed

Material and labour for anodised aluminium sections for windows, ventilators, side hung/ sliding three track partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. Note : (i) Glass panes, wire mesh & handle will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

Material and labour for anodised aluminium sections window, ventilator shutters, anodised aluminium section weighing minimum 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium snap beading screws etc. complete all as specified and as directed.

Supply and fixing stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing for 5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge..

Supply and fixing for 4mm thick figured glass, ordinary quality and glazing with oil putty in square n .exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge.

Supply and fixed in repair for 19/20 mm high strength aluminium powder coated drapery rod fancy type complete all as specified and as directed .

Supply and fix in repairs 19/20mm fancy type bracket for drapery rods anodized aluminium alloy complete all as specified..

Supply and fixing in repair floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, overall length cover plate 150mm complete all as specified and as directed by the Engr-in-Charge.

Supply and fixed 75 mm size steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

Supply and fixed in repair 100mm size steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

Supply and fixed in repair 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.

Supply and fixed in repair 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.

Supply and fixed in repair 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

Supply and fixed in repair 150mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed

Supply and fixed in repairs 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 drip and straight flashing complete all as specified and as directed.

Material and labour for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work upto 12 storied bldg con- forming to Fe.290.Gde-E-16

S&F in repairs steel rolling shutters, without ball bearing, as specified including top cover anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete, push pull or manual type thickness of laths in 1 mm comlete all as specified and directed.

Oiling/greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shuttercomplete all as specified and as directed.

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.

Material and labour for light shed Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and incl 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Material and labour for light shed Virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting, dado, (in vertical surface) set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and incl 10 mm thick screed plaster in CM 1:4 complete all as specified and directed

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

Material and labour for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof anti fungle paint over a coat of acrylic primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over putty to match the existing surfaces complete all as specified and as directed

Dismantling of defective interlocking paver block and keep aside paver block for reuse or taking on schedule of credite complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 typr D2 using 40 mm nominal size graded crushed stone aggregate 150 mm thick in sub base for laying tiles, pavings, floorings etc. all as specified and as directed.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Material and labour for chequered cement concrete tiles, cast in rubber mould, glossy finish of approved colour, general purpose, double layer, size 30 cm X 30 cm X 22 -25 mm thick, with mixture of white and grey cement in equal proportions and pigments, set, jointed and pointed in neat cement slurry in floor including laying over 20 mm thick bedding of cement mortar(1:4) all as specified and as directed.

Material and labour for cement concrete in surface channels and drains in 1:3:6 type C2 using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

BHARAT TRADING CORPORATION

HIGH HILLS INFRA

KAKOLI ENTERPRISE

NATIONAL CONSTRUCTION CO

UNIVERSAL TRADING