15 TH FINANCE TIED GRANT 2024 2025 II ND ALLOTMENT

Amount

Dismantling and Clearing away from this site for exisiting damaged condition of work including cost for all labour charges etc., Complete as per standard Specification. i)Plain cement Concrete work ( SSR S.No. 28/37 Page 22

ii) brick work in Cement Morter SSR S.NO;14/14 PAGE 21

iii)Indian type water closet :

iv) Palstering in cement morter:

Earth work excavation for foundation and depositing on bank for refilling within an initial lead of 10.00 m and an initial lift of 2.00 in hard stiff clay. Stiff black cotton soil, hard red earth, sales, murrams, gravel, stoney earth, earth mixed with small sized boulders and hard gravelly soil and except hard rock requiring blasting including shoring, strutting, bailing water wherever necessary and all other incidental charges etc., complete as directed by departmental officers as per S S 20B

Plain Cement Concrete 1:4:8 (One Part of cement, Four Part of sand, and Eight Part of Aggregate) mix using 40mm ISS HBG metal from approved Quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete to site and other incidental charges etc., complete. as per standard specification 28 V,VI S25

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Supplying and fixing in Position of indian type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Plastering in Cement Mortor 1:3 Mix (one cement, five sand) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Suppling and fixing of 30 mm thick Cudapah slab including cost and conveyance of all materials and all labour charges etc. complete as per standard specification

Supplying and fixing 75 mm Thick RCC Pre cast slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications.,

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

H) Painting one coats over the old iron work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications Rate for 10 Sqm

H) Painting one coats over the NEW iron work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications Rate for 10 Sqm

Paving the floor with Vertified tiles of approved make and quality and clour of size 300x300x10mm in cement mortor 1:3, 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification

Daddoing with glazed titles of size 300x200x6mm of approved make and quality and clour cement mortor 1:2 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitablecolour for open PVC light point / fan point (for electronic regulator) (6 points per coil) (SD 20)

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush withwall with 3mm thick hylem sheet cover for 15A 3 pin flush type non inter locking wall socket with 15A flush typeswitch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC powerplug point ( SD-41)

supply and fixing of Eectrical material 9 wLED bulb

1 x 13 W CFL Street light fitting

Wooden board

36 Amp fuse carier

Incinetar for ladies

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copperconductor of 1100V on 7 / 20 GIbearer wire for service connection mains (SD 65)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitablecolour(SD 56)

Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 2.50 mm Flate vertified cable

32 mm dia GI Pipe " B " class

32 mm dia GI Coupling

32 mm dia GI Elbow

32 mm dia Bore well clamp

110 mm dia bore well cover

32 mm dia GI Union

32 mm dia GI Hex nipple

32 mm dia GM Gate valve

32 mm dia MTA

32 mm dia UPVC Pipe

32 mm dia UPVC Elbow

1000 LT HDPE Tank

32 mm dia Tank Nipple

32 mm dia Ball Valves

32 x 20 mm dia PVC Reduced Thereded Elbow

20 mm dia Waste not Tap

wash basin

.Supply of single phase Sub mersible motor with Pump set as per ISI 8034 with Out Panel board of 20 lpm X 125 M of approved quality including cost and conveyance of all materials and all labour charges and other incidental charges to site etc., complete as per standard specification.

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). 2HP PANAL BOARD SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START

Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter,Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Providing and laying of 83mm thick high strength type conforming is 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 50 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specificatio

C.SIVAKUMAR (BID ID -1306866)