REPAIR REPLACEMENT OF UNSV SECURITY LIGHTS FLOOD LIGHTS STREET LIGHT PANELS LIGHTENING CONDUCTOR AND LT UG CABLE CAPACITOR BANKS APFC PANEL LT CONTROL PANEL AND OTHER ALLIED WORKS IN PH I AND PH II IN THE AOR OF AGE EM UNDER GE NARANGI

Amount

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable , etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling watering and well ramming in layers not exc 25 cm thick for any type of soil complete all as specified and as directed.

Removing surplus soil to a distance not exc 50m and depositing at level not exc 1.5m above the starting point complete all as specified and as directed.

M&L for taking out old unserviceable UG cable of any size/ type from trenches / wall / roof etc. for necessary repair/ replacement / re-laying works complete all as specified and as directed.

M&L for relaying old serviceable UG cable of any size/ type alongwith brick protection, sand cushioning etc as obtained from taking up/down old cable here in before in trenches/ wall/ roof etc. after necessary repair/ rerouting if directed complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

M&L for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable for protection of LT cable complete all as specified and as directed.

M& L for Manual boring under roads / hard standing by required T&P without disturbing the top surface of the road for passing the cable in GI Pipe of 40 mm to 80mm dia complete all as specified and as directed.

M&L for GI pipe light grade 40mm bore with all fittings laid in trenches or in floors, including taking up/ down old pipe complete all as speciffied and as directed

S&F in repair cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 25-50 Sqmm 3.5 core complete all as specified and as directed.

S&F in repair cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 70-120 Sqmm 3.5 core complete all as specified and as directed.

S&F in repair cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 150-185 Sqmm 3.5 core complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M & L for preparation of old painted surfaces of LT steel tubular pole 9.00 m long, cross arms, bracings, supports, clamps, back plate with nut bolts washers and providing one coat of aluminium paint including numbering and making strips in circular shape of diameter 150 mm black colour letter of hight 50 mm complete all as directed by Engr in Charge not exceeding 150 mm upto 1.5 mtr above ground level with alternate layer of white and black paint complete all as specified & as directed.

M & L for complete removal of existing treatment of LT Panel, box, board, cross arms etc. and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

S &F street light fitting of 90 Watt LED made of pressure die cast aluminium housing with toughned glass and LEDs with secondary optics and IP 66 protection and lens embedded PC Cover having top opening seperate driver compartment ,should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT≥5500,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection device upto 5 kVcomplete also tested for 440 Volt for 8 hour Phase to phase without any damage including taking down old unserviceable light fittings complete all as specified and as directed. (Make :- Century Ltd Magic Cat Part No. SPBL090C2111 or equivalent in Philips/Havells/Crompton ) ( NOTE : (i) PVC insulated PVC sheathed, multistranded aluminium or copper conductor cable of size 1.5 sqmmX 3 core from light fitting to Street light feeder (max 2.0 mtr ) deemed to be included in quoted rate. (ii) Manufacturer’s test certificate of LED light fitting in respect to LM 79 and LM 80 shall be submitted by the contractor.)

S &F street light fitting of 46/45 Watt LED made of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver ,should have luminaire efficacy ≥120 lumens/watt,CRI>70 ,PF > 0.95,CCT≥5500,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection device upto 5 kVcomplete also tested for 440 Volt for 8 hour Phase to phase without any damage including taking down old unserviceable light fittings complete all as specified and as directed. (Make :- Century Ltd Magic Cat Part No. SPBL046C2126 or equivalent in Philips/Havells/Crompton ). ( NOTE : (i) PVC insulated PVC sheathed, multistranded aluminium or copper conductor cable of size 1.5 sqmmX 3 core from light fitting to Street light feeder (max 2.0 mtr ) deemed to be included in quoted rate. (ii) Manufacturer’s test certificate of LED light fitting in respect to LM 79 and LM 80 shall be submitted by the contractor.)

Supply and fixing LED flood light of capacity 50 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have LED efficacy≥100 lumens/watt,CRI>70 PF 0.95,CCT≥3000, IP66,impact resistance IK 07 , inbuilt 5kV surge protection device including taking down old unserviceable light fittings complete all as specified and as directed. (Make : Century Ltd Magic Cat Part No.FWZP050C0833 or equivalent in Philips/Havells/Crompton) ( NOTE : (i) PVC insulated PVC sheathed, multistranded aluminium or copper conductor cable of size 1.5 sqmmX 3 core from light fitting to Street light feeder (max 2.0 mtr ) deemed to be included in quoted rate. (ii) Manufacturer’s test certificate of LED light fitting in respect to LM 79 and LM 80 shall be submitted by the contractor.)

Supply and fixing LED flood light of capacity 100 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have LED efficacy ≥100 lumens/watt,CRI>70 PF 0.95,CCTCCT≥5500, IP66, impact resistance IK 07 ,inbuilt 5kV surge protection device including taking down old unserviceable light fittings complete all as specified and as directed. (Make : Century Ltd Magic Cat Part No.FWZP100C0135 or equivalent in Philips/Crompton/ Havells ( NOTE : (i) PVC insulated PVC sheathed, multistranded aluminium or copper conductor cable of size 1.5 sqmmX 3 core from light fitting to Street light feeder (max 2.0 mtr ) deemed to be included in quoted rate. (ii) Manufacturer’s test certificate of LED light fitting in respect to LM 79 and LM 80 shall be submitted by the contractor.)

M&L for connection of junction box to street light luminaire using wiring with two runs ( P-N) of single core 1.5 sqmm ( nominal area) FRPVC insulated and unsheathed multistranded copper conductor cable 1100V grade and one run of FRPVC insulated and unsheathed multistranded copper conductor cable 1100V grade of size 1.5 sqmm single core as earth continuity wire drawn through PVC conduit ( Heavy grade) and tiding the same by aluminium strip with the pole complete all as specified and directed.( Note: Two single core 1.5 sqmm cable and one single core 1.5 sqmm earth conductor cable and one run of PVC conduit shall be measured as one run. ) .

S&F in repair MCCB with Thermal - magnetic release of 80-100 Amps, 4 Pole, 415V, 25 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories complete all as specified and as directed. (Make : L&T Cat Part No. CM91712OOKOOG or equivalent in Schneider/ Legrand)

S&F in repair MCCB with Thermal - magnetic release of 125-160 Amps, 4 Pole, 415V, 25 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories complete all as specified and as directed. (Make : L&T Cat Part No. CM90642OOMO or equivalent in Schneider/ Legrand)

S&F in repair MCCB with Thermal - magnetic release of 200-250 Amps, 4 Pole, 415V, 36 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories complete all as specified and as directed. (Make : L&T Cat Part No. CM92109OOP1OG or equivalent in Schneider/ Legrand)

S&F in repair MCCB with Thermal - magnetic release of 320-400 Amps, 4 Pole, 415V,50 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories and taking down old unserviceable one complete all as specified and as directed. (Make : L&T Cat Part No. CM94103OOR1OG or equivalent in Schneider/ ABB)

S&F in repair MCCB with Thermal - magnetic release of 500-630 Amps, 4 Pole, 415V,70 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories complete all as specified and as directed. (Make : L&T Cat Part No. CM94102OOT1OG or equivalent in Schneider/ Legrand)

S&F in repair SS enclosure for MCCB of rating 250 Amps in built neutral link for TPN system 1 IK08 and IP 30 protection having louvers for better heat dissipation suitable to accommodate upto 185 Sqmm 3.5 core Aluminium armoured cable including taking down and refixing serviceable/ new MCCB in enclodsure and conecting existing IC/OG cable with proper dimension lugs complete all as specified and as directed. (Make : L&T Cat Part No. CM91003 OOOO or equivalent in HAVELLS/ CG ) . ( Note : The cost of New MCCB if provided under the item shall be measured and paid seperately).

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried in ground (Earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised iron earth strip 25 mm x 4 mm as earth lead by means of nut, bolts check nut and wahser of galvanised iron or steel etc all as shown in electrical plate No.3 of SSR part I- 2009 connected to earth test point all as specified or indicated including PCC pit in PCC (1:3:6) type C-1 cast iron MS frame, 50 mm thick pre cast RCC (1:1 1/2:3) type nominal mixed cover slab rainforced with 8 mm dia MS deformed bar 15 C/C and suitable for handle cast including necessary exavation earth work in soft/loose soil and disposal of soil to adistance n exc 50 m and charcoal 120Kg, salt 105 kg, funnel with water pipe ,wire mesh, copper logs etc GI protection pipe of size 15 mm bore dia including tetsing complete including taking down old unservicable earthing & earth pit all as specified and directed by Engr-in-charge.

M&L for earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15 mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with the top edge not less than 1.5 mtr below ground level connected to copper strip 20 x 3 mm as earth lead by means of bolts, nuts, check nuts and washers of steel and other end connected to earthing test point including funnel, 20mm dia GI pipe medium grade for watering pipe and 25 mm bore GI pipe, light grade for protection of copper strip, wire mesh, charcoal or coke and common salt in alternate layers all around the earth electrode compacted thickness 15 cm, earthing in pit in PCC (1:3:6) type C1, 50 mm thick pre-cast RCC cover slab (1:2:4) type B1 set in CM (1:4), reinforced with 8 mm dia TMT bars @ 10 cm/c/c and suitable handle of 10 mm dia MS round bars including earth work in excavation in soft/loose soil, desposal of soil not exc. 50 meter complete and testing on completion all as shown in electrical plate No 3 of MES schedule, part-I complete including taking down old unservicable earthing & earth pit complete all as specified and as directed. Notes 1. The unit rate include copper strip from top of earth plate upto 7.5 metre.

Taking down old unsv / corroded LT feeder pillar box / DB Box / Busbar Chamber of any sizes or types and disconnection of all electrical connections complete for replacement with new one, complete all as specified and as directed.

Supply, installation, testing and commissioning of factory made powder coated (CPRI approved) outdoor type, dust & vermin proof feeder pillar box made out of 3.15mm CRCA steel sheet of suitable size and angle iron 40 mm x 40mm x 6 mm , powder coated over one coat of red oxide primer, factory made duly fixed on the ground by PCC foundation (1:2:4 Type B-1) of size700mm x300mm x600mm on the adjacent pairs of leg & net cementing the same. The feeder pillar box shall be cured by 9 tank chemical treatment process duly painted with two coats of epoxy based powder quoted paint over a coat of red oxide primer (internally & externally) on the surface all as specified and directed by Engr-in-Charge. The feeder pillar box is cubicle shaped, roof canopy type, with special type of heavy duty industrial door hinges and totally enclosed dust proof and vermin proof front and back opening with locking arrangements. The box shall have provision/accommodation of the following electrical items:- INCOMING: (i) Aluminium bus bar 4 strips (covered with colour coded insulated PVC sleeves) 600 Amps capacity of suitable length including connection etc complete – 01 Set (ii) Indicator lamp for RYB phase (iii) Moulded case circuit breaker 320-400 Amps 415 Volts, Thermal Magnetic release with adjustable over load setting and adjustble short circuit setting,4 pole, ,Ics=100% Icu,50 kA breaking capacity.= 01 Nos. Make : L&T Cat Part No. CM94103OOR10G or equivalent in Schneider/ ABB. (iv) VAF+PF multifunction meter CI flush mounting 96x96mm CT/PT site programmable including CTs. Note: In bus bar there must be provision of connecting of minimum 4 outgoing cable

OUTGOING: (i) Moulded case circuit breaker 200-250 Amps 415 Volts, Thermal Magnetic release with adjustable over load setting and adjustble short circuit setting,4 pole, ,Ics=100% Icu,36 kA breaking capacity.= 01 No. Make : L&T Cat Part No. CM92109OOP1OG or equivalent in Schneider/ ABB (ii) Moulded case circuit breaker 125-160 Amps 415 Volts, Thermal Magnetic release with adjustable over load setting and adjustble short circuit setting,4 pole, ,Ics=100% Icu,25 kA breaking capacity.= 01 No. Make : L&T Cat Part No. CM90642OOMO or equivalent in Schneider/ ABB (iii) Moulded case circuit breaker 80-100 Amps 415 Volts, Thermal Magnetic release with adjustable over load setting and adjustble short circuit setting,4 pole, ,Ics=100% Icu,25 kA breaking capacity.= 03 No. Make : L&T Cat Part No. CM91712OOKOOG or equivalent in Schneider/ ABB

Supply only Switch disconnector-fuse unit of current rating 125Amp having terminal shrouds on both sides including phase barrier open execution type suitable for DIN fuse-link(4P) complete all as specified as directed. Make : L&T Cat Part No. SK90497 or equivalent in Havells/C&S.

Supply only Switch disconnector-fuse unit of current rating 100 Amp having terminal shrouds on both sides including phase barrier open execution type suitable for DIN fuse-link(4P) complete all as specified as directed. Make : L&T Cat Part No. SK90496 or equivalent in Havells/C&S.

Supply only digital 8 step APFC controller of size 96X96 for contractor switching, operating voltage 415V Volts complete all as specified and as directed. Make : L&T, Cat No CS90902OOOO or equivalent make of Schneider/ABB.

Supply only Indoor tape insulated ring type low tension current transformers of ratio 100/5A accuracy class 1.0 for LT panel board, complet all as specified and directed by Engr-in-Charge.

Supply only Indoor tape insulated ring type low tension current transformers of ratio 200/5A accuracy class 1.0 for LT panel board, complet all as specified and directed by Engr-in-Charge.

Supply only 3 Phase, 415 V duty contactor, with built in surge suppressor and encapsulated with damping resistor assembly suitable for 5 KVAR rating complete all as specified and as directed. Make : L&T Cat Part No CS96127 or equilvalent in Havells/ABB.

Supply only 3 Phase, 415 V duty contactor, with built in surge suppressor and encapsulated with damping resistor assembly suitable for 10 KVAR rating complete all as specified and as directed. Make : L&T Cat Part No CS96156or equilvalent in Havells/ABB.

Supply only 3 Phase, 415 V duty contactor, with built in surge suppressor and encapsulated with damping resistor assembly suitable for 20 KVAR rating complete all as specified and as directed. Make : L&T Cat Part No CS90021or equilvalent in Havells/ABB.

Supply only 3 Phase, 415 V power contactor of AC3 rating 25 Amp complete all as specified and as directed. Make : L&T Cat Part No CS94110 or equilvalent in Havells/ABB.

Supply only 3 Phase, 415 V power contactor of AC3 rating 32 Amp complete all as specified and as directed. Make : L&T Cat Part No CS94111 or equilvalent in Havells/ABB.

Supply only 3 Phase, 415 V power contactor of AC3 rating 40 Amp complete all as specified and as directed. Make : L&T Cat Part No CS94190 or equilvalent in Havells/ABB.

Supply only coil for MNX 25-MNX 40 contactor 240 V AC complete all as specified and as directed. Make : L&T Cat Part No CS94105 or equilvalent in Havells/ABB.

Supply only MNX contactor contact kit complete all as specified and as directed. Make : L&T Cat Part No CS94147 or equilvalent in Havells/ABB.

Supply only heavy duty cylindrical type capacitor of capacity 5 k VAR, suitable for operating on 440 Volts 3 Phase complete all as specified and as directed. Make : L&T or equivalent in Havells/ABB.

Supply only heavy duty cylindrical type capacitor of capacity 10 k VAR, suitable for operating on 440 Volts 3 Phase complete all as specified and as directed.

Supply only heavy duty cylindrical type capacitor of capacity 12.5 k VAR, suitable for operating on 440 Volts 3 Phase complete all as specified and as directed. Make : L&T or equivalent in Havells/ABB.

Supply only heavy duty cylindrical type gas filled capacitor of capacity 20 k VAR, suitable for operating on 440 Volts 3 Phase complete all as specified and as directed.

Supply only heavy duty cylindrical type capacitor of capacity 25 k VAR, suitable for operating on 440 Volts 3 Phase complete all as specified and as directed. Make : L&T or equivalent in Havells/ABB.

Supply and fix in repair duty box capacitor with inbuilt MCB of suitable rating and LED indication for indication of capacitor health of capacity 20 KvAR with all neccessary connection with LT panel complete all as specified and as directed. Make : L&T Cat Part No. LTBCM325B2 or equivalent in Havells/ABB.

Repairs/maintenance of APFC LT Panel board/box upto 100 kVAR capacity including disconnecting all incoming and outgoing connection after taking necessary shut down, cleaning the carbon/rust from bus-bar, re-thimbling with new lugs/thimble of existing size, removing old burn out wiring and re-wiring with new cable of exising size, including replacement of unserviceable parts complete all as specified & directed :- Noted :- (i) New spares shall be measured and paid separately under relevants items. (ii) Cost of unsheathed multistranded copper conductor of size upto 2.5 Sqmm for internal wiring like connection of CTs deemed to be included in quoted rate. (iii) For item No 35 to 52 fixing charge of items are considered in item No 54 (iv) All calibration of meters and APFC controller shall be done by the contractor after fixing in position. (iv) Suitable size of copper/aluminium cable lugs shall be provided by contractor for fixing/jointing the cable in bus bar etc.

Repair/ maintenance of LT panel board/box of various sizes including disconnecting of all incoming and outgoing connection after necessary shut down, cleaning the carbon/ rust from bus bar, rethimbling with new lugs/ thimble of existing sizes, replacing burnt DMC insulator or bus bar supports as per existing one, removing old burnt wiring and rewiring with new cable of existing size, including replacement of unserviceable parts complete all as specified and directed. ( Note : i) The spares to be replaced under this item will be paid seperately as Supply Only under relevent item of this schedule. ii) The cost of 2.5 Sqmm multistranded unsheathed copper conductor is deemed to be included in the quoted rate. iii) All caliberation of meters shall be done by the contractors after fixing in position. iv) Suitable sizes of copper cable lugs shall be provided by the contractor for fixing / jointing the cable in bus bar etc.

Supply only 3 phase single function LED Voltmeter flush mounting 96x96 mm of input voltage measurement range 50 - 520 VAC ( P-P) , 5 A, accuracy class 1 for LT panel board complete all as specified and as directed. Make : L&T Cat part No. WL1320 10 OOOO or equivalent in Seimens/ Conserv.

Supply only 3 phase VAF+PF digital meter flush mounting 96x96 mm of input voltage measurement range 50 - 520 VAC ( P-P) , 5 A, accuracy class 1 for LT panel board complete all as specified and as directed. . Make : L&T Cat part No. WL411021OOOO or equivalent in Seimens/ Conserv.

Supply only Indoor tape insulated ring type low tension current transformers of ratio %00/%A accuracy class 1.0 for LT panel board complete all as specified and as directed.

Supply only LED indicator lamps to be mounted on LT panel for RYB phase ( Of colour Red, Green , Yellow) operates on 240 V AC for fixing in the existing place for LT panel board complete all as specified and as directed. Make : L&T or equivalent in AE/ Conserv.

Supply only FRLS PVC insulated single core Unsheated multistranded copper conductor for voltage grade 1100 V of size 50 Sqmm complete all as specified and as directed.

Supply only FRLS PVC insulated single core Unsheated multistranded copper conductor for voltage grade 1100 V of size 25 Sqmm complete all as specified and as directed.

Taking down defective street / flood light fittings from height upto 11 mtr of wattage upto 120, from pole for repairs and refixing the same, after replacing defective accessories like LED driver, SPD, PVC inslutaed sheathed copper conductor etc complete all as directed. (Note : New spare parts/components of street light fittings shall be measured and paid sepeartely under respective items as supply only however, screws, insulation sleeves, nuts, bolts, washeres and PVC insulated PVC sheathed, multistanded aluminium or copper conductor cable of size 1.5 sqmm x 3 core from light fitting to street light feeder are (max 1.5 mtr) deemed to be included in quoted rates).

Supply only constant current LED driver sutiable for LED luminaries of wattage of 45 Watt complete all as specifed and directed. Make : Bajaj, Surya, Havells/C&S.

Supply only constant current LED driver sutiable for LED luminaries of wattage of 60 Watt complete all as specifed and directed. Make : Bajaj, Surya, Havells/C&S.

Supply only constant current LED driver sutiable for LED luminaries of wattage of 70 Watt complete all as specifed and directed. Make : Bajaj, Surya, Havells/C&S.

Supply only constant current LED driver sutiable for LED luminaries of wattage of 80 Watt complete all as specifed and directed. Make : Bajaj, Surya, Havells/C&S.

Supply only constant current LED driver sutiable for LED luminaries of wattage of 90 Watt complete all as specifed and directed. Make : Bajaj, Surya, Havells/C&S.

Supply only surge protection device of capacity 10 kV complete all as specified and directed.

Supply and fixing in repairs MCBs, DP 32 Amps, 240V 10 kA, 'C' curve complete all as specified and directed. Make : L&T Cat Part No BB20320C or equivalent model of make Siemens/ABB.

Supply and fixing in repairs MCBs, FP 32 Amps, 240V 10 kA, 'C' curve complete all as specified and directed. Make : L&T Cat Part No BB40320C or equivalent model of make ABB/Schneider.

Supply and fixing in repairs MCBs, FP 63 Amps, 240V 10 kA, 'C' curve complete all as specified and directed. Make : L&T Cat Part No BB40620C or equivalent model of make ABB/Schneider.

Supply and fixing in repairs street light bracket made of GI pipe 40 mm bore light grade (bend to shape), 1.5 metre long and fixed with Ms flat iron clamp(clamp shall be 40 x 5mm), nuts, bolts and washers on pole complete all as specified and directed.

Supply and fix in repair 3 pole power contactor of AC1 rating 50 Amps, with built in surage supprressor, RoHS compliant including necessary electrical connnection with suitable size of copper conductor cable complete all as specified and directed. Make : L&T Cat Part No CS94568 or equivalent in Havells/C&S.

Supply and fix in repair astronomical time switch single phase operatges on 110-240VAC including all necessary connnection complete all as specified and directed. Make : L&T Cat Part No T2DDT7 or equivalent in Havells/C&S.

M&L in repair for Air termination, single pointed, aluminium rod 12 mm dia dn 300mm long to be fixed on horizontal lightning conductor with suitable fixing arrangement all as specified and directed.

M&L in repair for Air termination, single pointed, copper rod 12 mm dia dn 300mm long to be fixed on horizontal lightning conductor with suitable fixing arrangement all as specified and directed.

Taking out old GI/aluminium strip of any size and type in any height and any location as directed by Enginner-in-Charge.

M&L for refixing of serviceable aluminium strip/GI strip retrieved form taking out old GI/Aluminium strip on top of "V" type procelain insulator sutitable size, GI nuts and bolt, screws cleats etc. (Cost of procelain insulator deemed to be included in quoted rate) duly straightened properly as directed by Enginner-in-Charge. Note : the distance between two porcelain insulator shall be one metre.

M&L for aluminium strip 25 x 3.15 mm with "V" type porcelain insulator or DMC insulator of suitbale size and fixing with GI screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

M&L for copper strip 25 x 3.15 mm with "V" type porcelain insulator or DMC insulator of suitbale size and fixing with GI screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

M&L in repair for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed incl 03 Nos 8mm dia 25mm long hexagonal head screws for fixing strips to test point including necessary fixing arrangement to fix test point terminal block to test point junction box all as specified and directed. complete all as specified and directed.

M&L for fabrication of display board for earth pit nos, location and periodical test results for lightening arrester earthing, made of MS sheet 4.00 mm thick rectangular shape welding on 12 mm dia rod of height from ground level 30 cm including fixing in PCC 1:2:4 with 20 cm x 20 cm x 20 cm (below ground level) grade aggregate foundation. Dimension of board shall be 30 cm x 25 cm. The instruction shall be written on black painted board with white letters not less than 2 " size for all type of boards complete all as specified and directed .. Note :- Cost of all necessary MS Sheet, aluminum screws and PCC works etc are deemed to be included in the quoted rate.

S&F in repair street light junction box of size 155x210x92mm made of high quality polycarbonate with IP-66 protection ( Dust and vermin proof according to IEC-60529) totally insulated made of halogen and silica free recyclable material having high quality gasket made out of polyurethane with MCB, DP, 10 KA, 6 Amps to be fixed on Din rail, with locking arrangement with cable gland suitable upto 10Sqmm cable and neccessary fixing arrangements such as clamps, nuts, bolts etc. complete all as specified and as directed. Make Hansel Cat No. KF-1616B.

M&L in repair for thermoplastic ( Polycarbonate) Junction box for test point without terminal block of dimension 130x130x77mm IP 66 halogen free and weather proof including four hexagonal anti corrosive screws for outdoor installation complete all as specified and as directed. Make : Hensel Cat Part No. KF0600B .

VISHWAKARMA ELECTRICAL

J K CONSTRUCTION

M/s KRISHNA CONSTRUCTIONS