WELCOME MAINTENANCE TO MD ACCN AND CERTAIN B R AND E M WORKS AT ZONE A AND ZONE B AT MIL STN SHAHJAHANPUR UNDER GEE BAREILLY.

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.complete all as specified and directed.

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling all as specified and directed.

M&L for preparing old decorated surfaces of wall and applying two coats of cement base paint on old surfaces of wall complete all as specified and as directed

M&L for two coats of cement base paint including preparation of new surface of wall complete all as specified and as directed.

M& L for two coats of oil bound distemper including preparation of new surface of wall complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and applying two coat of distemper oil emulsion (white or tinted) complete all as specified and directed.

M&L preparing old distempered surfaces of wall by complete removal of existing treatment and applying two coat of oil emulsion distemper over 2mm thick wall care putty complete all as specified and as directed.

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified

M&L preparing Old plastered or unplastered surfaces of wall and applying two coats of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing Old plastered or unplastered surfaces of ceiling and applying two coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping and applying one coat of synthetic enamel paint (any tint/shade) complete all as specfied and direcetd

M&L for preparation of old painted steel and iron surfaces of any description,over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4.5 sqmeach complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Refixing of shutter in the same of opening after minor repair as directed by Engr -in-Charge

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hang shutter including hinges steel pag stay.complete all as specified and directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and fixing con- forming to Fe.410-W(Gde-E-250) quality-A , complete all as specified and directed.

S&F 0.63 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts,urinal trough and funnels etc , cut to size,edge beaded if directed, holes punched , including round headed screws,clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up,mitred angles, stopped ends, outlets etc as required all as specified and directed.

Dismantling boarding any sidescription fixed in any position with nails all as specified and directed.

S&F 20mm thick boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides..complete all as specified and directed.

S&F of 30 mm of second class hard wood Glazed and and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides..complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F haps and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws.complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed .complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed .complete all as specified and directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed.complete all as specified and directed.

M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F, 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for complete all as specified and directed.

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete all as specified and directed.

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface of size 300 mm x 200 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement or colour cement laid over & including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and jointed with neat cement slurry and pointed in coloured cement to match coloured tiles laid over & including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc laid over & including 15 mm thick screed bed in CM (1:6) set and jointed with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in dado/skirting etc laid over & including 10 mm thick screed bed in CM ( 1:4) set and jointed with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.

M&L for Vitrified light shade coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Vitrified light shade coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repair plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S& F in repairs Brass CP mixer 15mm Dia for mixing hot & cold water, screwed down, three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed.

Taking down old 110/75 mm bore PVC(SWR) pipes in any position .complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door.complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl. .complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius.complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed.

Ditto all as per item no 76 above but 20 mm dia all as specified and directed.

S&F, GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

S&F, GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

Cutting chases in brick walls pinning in, making good to facings where required and pointing in cement mortar 1:3 ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing etc, and making good, cutting not exc 10 cm girth complete all specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair kitchen sink coupling of any size and any pattern including waste pipe complete all as specified and directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).complete all as specified and directed.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S&F (in repairs)two way angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair for CP Health Faucet with 1 meter Flexible tube & Hook complete all as specified and directed.

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified and directed.

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity,ISI marked, ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity,ISI marked, ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).complete all as specified and directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed.

S&F 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repair only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed.

S&F PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S&F in repair CP towel rail (tubular type) 20mm dia, 600 mm long between flanges all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

Supply only glass dividing strip 3mm thick and 22mm wide in flooring complete all as specified and direcetd.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channels and base of drains complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc..complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab flooring 20-25 mm thich laid over & including 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing .complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers laid over and including 10mm thick rendering in CM 1:4 including rubbing and polishing .complete all as specified and directed.

Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M&L for 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

S&F 12 mm thick accoustic perforated tiles fixed or laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 6 mm dia GI (upto 1200 mm in length) adjusting levels fixed to roof slabs by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete all as specified and directed.

S&F in repair fancy type curtain rails harisson rails,mild steel , chormium plated with fixing bracket,stops,rollers etc for hangging curtain rod complete all as specified and directed

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

M&L for cleaning roof surface such as grass ,soils etc as directed by Engineer-in-charge complete all as specified and directed.

S&F 25 mm thick Insulated PVC Wall Lining consisting of PVC Insulated panels having expanded polystyrene(EPS) stuck to 2mm thick wood grain printed PVC seet duly fitted into the wall as per specifications and drawing all as specified and directed

E/M PORTION :-Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc complete all as specified and directed.

M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in and including non metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings such as Bends Teess reducers etc and galvanized iron sheet steel terminal boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete for One light / Fan point controlled by one way switch complete all as specified and directed.

Ditto all as per item no 124 above but One Bell /Buzzer point controlled by one way switch complete all as specified and directed.

Ditto all as per item no 124 above but One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.

Ditto all as per item no 124 above but One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed.

Ditto all as per item no 124 above but one light point controlled by two way switches complete all as specified and directed.

All as per item Ser No.124 (here in before) but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and fixing switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fix bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing switch piano flush type one way 15 Amps SP complete all as specified.

Supply and fixing socket out let 5 pin 5 Ampsflus type all as specified and directed.

Supply and fixing socket outlet polycarbonate 2 in 1 , 3 pin 5 / 15 Amps flush type complete all as specified and directed.

M & L for replacement of Step regulator modular type for ceiling fan of any sweep complete all as specified and directed by Engr-in-Charge.

S&F for lamp holder insulated body of PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed.

Supply and fixing bell ding-dong musical AC 230 Volts single pole complete all as specified and directed.

S&F Stepped type electronics fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix in replacement wall mounted light fitting LED 10 watts with accessories including 01x10/9 watt LED bulb complete all as specified and as directed. Make - Havells cat No- LHFHCHE1TRW020 or equivalent as approved by GE.

Suppply and fixing submain wiring with using two single core 6.0 SQmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI MArked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption built in ccement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed .(Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit).

Ditto all as per item Ser No.143 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Ditto all as per item Ser No.143 ( here in before) but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and replace Rigid PVC casing & capping 20/25 mm wide complete all as specified and directed.

S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'c' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed.

Supply and replace the Industrial laminated hylam sheet of 3 mm thick ISI marked of size 250 mm x 200 mm

Supply and replace the Industrial laminated hylam sheet of 3 mm thick ISI marked of size 350 mm x 250 mm

Supply and replace the Industrial laminated hylam sheet of 3 mm thick ISI marked of size 175 mm x 100 mm

Supply and replace the Industrial laminated hylam sheet of 3 mm thick ISI marked of size 100 mm x 100 mm

Supply and replace iron rectangular block for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick of size 175 mm x 100 mm and 50 mm deep

Supply and replace iron rectangular block for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick of size 100 mm x 100 mm and 50 mm deep

Supply and replace iron rectangular block for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick of size 250 mm x 200 mm and 50 mm deep

Supply and replace iron rectangular block for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick of size 350 mm x 250 mm and 50 mm deep

Taking down ceiling fan cable end,dismantling blades and removing fan for minor repairs complete all as specified and directed.

M & L Painting of ceiling fans complete, in situwith synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan

Supply and fix in replacement of sheet steel MS enclosure earth plug socket 2 pin 20 amps with metal 20 amps with MCB 20 amps complete, all as specified and as directed. ( NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)

M/S SHAHABUDDIN AND SONS

M/S DEEN ENTERPRISES

M/S CHAUHAN ELECTRIC WORKS