Replacement of major components of the pumping machinery installed at Intakes Sitlee under UT Capex Budget

Replacement of major components to recapitalize the 1.80 lakh GPH x 34.5 mtrs head VT pump extracted from unit no.III Intake-III Sitlee. Job includes loading of complete pump into the mechanical transport and carriage to workshop and unloading thereof. Dismantling of pump assembly, checking of damaged parts needs to be replaced/ recondition. Providing and fitting of stage casing bowl ( cast iron)- 01 no., suction bowl (cast iron)-01 no. and discharge bowl-01 no., Providing and fitting of pump shaft (SS-410)-01 no. as per sample. Providing and fitting of impellers ( SS CA-15) -02 nos., providing and fitting of Neck rings (SS/ Bronze)- 2 nos. Providing and fitting of impeller holding split rings-2 nos., stage casing bush (Gun metal-) 04 nos. Assembling of pump by using superior quality fasteners and paper sheets. Providing and fitting of Tubing adopter along with tubing bearings ( GM/ bronze) -1 no. Providing and fitting of liner shafts 38mmx1.5M(SS-410)-05nos.,Providing and fitting of Stuffing Box with Studs complete-1 no. Providing and fitting of top shaft (SS) along with drive key and reverse threading check nut with locking arrangement . P/f of Shaft couplers-06 nos. Providing and fitting of shaft enclosing tubes (MS) 65mm x1.5M - 6 nos. P/f of bush for shaft enclosing tubes (GM)-6 nos. . P/f of Thrust end assembly complete with non reversible ratcheting wrench device with bearings and lubrication indication guage-1no. Carriage of pump by mechanical transport from contractor facility to the site of work. Complete job includes cost of material, labour charges, transportation charges to and fro and testing of the VT pump on full load.