SMART PERIODICAL SERVICES TO MD ACCN AND OTM ACCN AT SANGRUR UNDER GE (S) PATIALA

Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed.

M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander ( having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. proper masking to be carried out before primer and paint application.

M&L for applying acrylic wall care putty on internal surfaces of walls/ceilings/soffits (as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after applying the putty, to make surface smooth and ready for receiving painting etc complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.

M&L for applying two coat of oil bound distemper on walls, white or tinted using rollers, applying over and including a coat of interior wall primer complete all as specified and directed.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed. NOTE: WPC shall be paid and measured separately.

Supply only Water proofing compound complete all as specified and directed.

Material and Labour for exterior painting work on new plastered surface including touch-up by using wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI.

M&L for Preparation of new plastered surfaces to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc including cornices and applying two coats of cement base paint over and including a coat of priming coat complete all as specified and directed