SPECIAL REPAIRS TO TOILET BLOCKS BLDG NO TB 138 TB 151 AND TB 152 OF TRAINEES IN 1 TRG BN 1 EME CENTRE SECUNDERABAD AND CERTAIN REVENUE WORKS UNDER GE NORTH SECUNDERABAD

Amount

Demolition of cement concrete in ground floor and pavings not exceeding 15 cm thickness (beolw or above ground level) including terrazzo finishes etc complete all as specified and as directed.

M & L PCC 1:4:8 type D2 75mm thick using 40 mm graded stone aggregate as sub base to floor complete all as specified and as directed.

Taking down cement plaster including terrazzo finish/ wall tiles on brick or stone walls etc of any description, including raking out joints hacking for key scrubbing sown with water etc complete all as specified and as directed.

Dismantling wall, floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.

M & L non skid ceramic tiles 7 to 8mm thick joint free coloured glazed tiles area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigments complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, for laying floor finishes like tiles & stone slab etc complete all as specified and as directed.

M&L coloured glazed earthenware tiles 200mm x 300mm x 7mm thick, on vertical surfaces such as skirting /dados etc set and jointed in neat cement slurry/ paste and pointed in white cement with pigments complete all as specified and as directed.

M&L for 10mm rendering in cement mortar 1:4, as backing coat on fair faces of brick work and finishing even & rough to receive glazed tiles etc complete all as specified and as directed.

S & F Vitreous china Squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rest in cluding 'P' or 'S' trap with provision of cement concrete bedding complete, fixed in repairs complete all as specified and as directed.

S&F PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs.

S & F in repairs stop valves / angle cock fancy type brass chromium plated screwed down for iron pipes or brass ferrule of size 15mm bore (Minimum weight 90 grams) complete all as specified and as directed.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing complete all as specified and as directed.

Taking up or down steel tubing 20mm dia and connections including cleaning for refixing complete all as specified and as directed.

Taking up or down steel tubing 40mm dia and connections including cleaning for refixing complete all as specified and as directed.

S & F GI tubing concealed on walls of size 15mm dia, medium grade, laid in floors/walls complete includign making grooves on walls and filling the grooves with CM 1:3 complete all as specified and as directed.

S & F GI tubing of size 15mm dia, medium grade, laid in floors/walls complete all as specified and as directed.

S & F GI tubing of size 20mm dia medium grade,laid in floor/walls complete all as specified and as directed.

S & F GI tubing of size 40mm dia, medium grade, laid in floors/walls complete all as specified and as directed.

S & F in repairs bib tap cast copper alloy fancy type chromium plated screwed down for iron pipes or brass ferrule of size 15 mm bore (minimum weight 90 grams) complete all as specified and as directed.

S & F in repairs (concealed type) with long shank and cup stop valves cast copper alloy chromium plated screwed down high pressure, with crutch or butterfly handle, screwed for both ends for iron pipe or for unions and fixed for iron pipes or brass ferrule of size 15mm bore (Minimum weight 90 grams) complete all as specified and as directed.

S&F for stop valve 40 mm bore, gun metal gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and as directed.

S & F in repairs swivel shower rose brass chromium plated fixed 125mm size suitable to fix 15mm dia pipe complete all as specified and as directed.

M&L PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs brass chromium plated 20mm dia towel rail 600mm long & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

S&F glass shelf of brass chromium plated fixed with and including chromium plated brass screws & wooden / plastic cleats as in repairs complete all as specified and as directed.

S&F powder coated mild steel peg stay set of 5 Nos of pegs all as specified and approved by Engr-in-charge.

M & L rendering 15mm thick on brick work in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M & L applying three coats of white wash on walls, including preparation of newly plastered surfaces complete all as specified and as directed.

M & L for PVC (SWR) pipes 110mm dia fixed to walls laid in floors single socketed with rubber ring joints complete all as directed and as specified including dismantling of old pipes complete all as specified and as directed.

M & L for PVC (SWR) pipes 75mm dia laid in floors, single socketed with rubber ring joints complete all as specified and as directed.

Supply & fix PVC (SWR) bends 110mm bore, any radius with oval access door fixed in repairs complete all as specified and as directed.

Supply & fix 110 mm bore PVC (SWR) double 'T' equal or un equal bends with acess door complete all as specified and as directed.

Supply & fix PVC (SWR) bends 110mm bore, any radius fixed in repairs complete all as specified and as directed.

Supply & fix PVC (SWR) bends 75mm bore, any radius with oval access door complete all as specified and as directed.

Supply & fix PVC (SWR) 110mm bore junction ( Double 'Y" equal or unequal with access door complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tank (cylindrical, vertical with classed top) hoisted and fixed in position of 2000 litres capacity complete all as specified and as directed.

M&L for ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe 40mm bore (Minimum weight 210gms ), fixed in repairs complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of area not exceeding 1.5 Sqm each complete all as specified and as directed.

S & F Solid PVC door framed of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in SSR Part I & II complete all as specified and as directed.

S & F 150mm long aluminium handles, cast type anodised extruded section and fixed complete all as specified and as directed.

S & F aluminium anodized barrel tower bolt of extruded section of size 150 mm long complete all as specified and as directed.

M & L for Butt hinges of size 100 mm long extruded aluminium alloy with galvanised mild steel hinge pin of type C-21 complete all as specified and as directed.

M&L for preparing the plastered or unplastered old surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel painting to steel surfaces complete all as specified and as directed.

M&L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs fixed with L-type or Jtype or cranked hook bolts including dismantling of old sheeting complete all as specified and as directed.

M&L 6mm thick asbestos cement serrated ridge for corrugated or semi corrugated sheets including dismantling of old one complete all as specified and as directed.

S &F in repairs of 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as directed

M&L PVC(SWR) 110 mm dia vent cowl fixed to walls complete all as specified and as directed.

S & F PVC (SWR) 125/110 dia gully trap setting and jointing with solvent cement as fixed in repair complete all as specified and as directed.

Complete removal of existing treatment on wall surface and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise specifically provided complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other sectionwith gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exe 1.5m deep for laying of drain pipes etc or for manhole, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and deposting where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed

Material and labour for half brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:4 complete all as specified and as directed

M & L rendring 15mm thick in CM 1:4 on other than fair face of brick work surfaces to be finished fair and even smooth without using extra cement and mix with 2% water proofing compound by weight of cement (WPC measured seperately a supply only) complete all as specified and as directed.

Extra over forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded agg) as in cover slab for man hole set in CM 1:6 complete all as specified and as directed.

S&F TMT bars 8mm to 10mm dia cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for 150mm bore Reinforced concrete pipes, class NP3 laid and jointed with collar complete all as specified and as directed.

Material and labour for cement concrete bed to drain pipes of 150 mm dia including packing under and haunching against the sides of pipes with concrete, after they are laid including testing in plain cement concrete 1:3:6, type C2 using 40 mm graded aggregate with necessary form work complete all as specified and as directed

Supply only integral water proofing compound of ISI marked complete all as specified and as directed.

Demolition of SGSW pipes/RCC hume pipes 150mm dia set and jointed in CM complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 centimetre thickness (below or above ground level) complete all as specified and as directed

Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for end forming brranch channel (1/2 round or 3/4 section) in cement conrete 1:2:4 type B1 smoth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Cleaning away all grass, vegetation, saplings, shrubs, bush-wood, under growth and roots for making approach to the working area and removing the rubbish to a distance of 50 metres outside the periphery of area complete all as specified and as directed

Material and Labour for cleaning the blocked manholes / septic tanks completely by emptying the liquid, semi solid and solid content including cleaning the inlet, outlet and getting out by using suction pump and filling the foul material in to the covered tanks attached to suction pump and removing, transporting and disposal of the same at a place earmarked for disposal of the foul material by municipal authorities to outside the cantonment area complete all as directed. NOTE: Cubic content of filled up portion of septic tank shall be measured for payment purpose

Excavation in post holes or similar holes not exceeding 0.50 cum and getting out/returning, filling in and ramming removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and as directed.

S&F MS plates(plain or chequered) channels, square cut or notched (ordinary and counter sunk) Fe-410-W(Gde-E-250) quality B forming holes without any attachment complete all as specified and directed

S&F of steel structure/frame made of MS box/pipe sections ERW or induction butt weld tubes conforming to IS-1161-1979 grade st 240 as in columns,purlins and truss complete fitting as directed including one shop coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and as directed.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as complete all as specified and as directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

M & L for PCC 1:4:8 Type D2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified and as directed.

M & L for applying two coats of synthetic enamel ordinary tint paint inclduing red oxide primer including prepartion on new steel or iron surfaces of any description, over 10cm in width or grith, not otherwise described complete all as specified and as directed.

M & L 100 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base floor, paving complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 18-20mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

S&F steel work in posts including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to Fe-410-S complete all as specified and as directed.

S & F structural steel (framed/unframed) roof trusses, purlins, rafters, rails and wind tie etc (Tee, Angle, channel or flat sections) incl distance pieces etc of gde Fe 410-S complete all as specified and as directed..

S&F mild steel bolts dia of neck not exceeding 12 mm purpose made with hexagonal or square head one end and screwed the other or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30 cm long complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (40 mm graded stone aggregate) in foundations, levelling courses, filling and mass concrete complete all as specified and as directed.

M&L PCC 25mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub-base to receive floor finishes complete all as specified and as directed.

M&L non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry over and including plastering 10mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 to receive wall finishes complete all as specified and as directed.

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised ) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed

M & L hard core of gauge not exceeding 63mm using broken brick deposited spread and levelled in layer not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L PCC 1:2:4 type B-2 using 40 mm graded aggregate as in floor 100 mm thick finished even surfaces & making impressions of expended metal whilst the concrete is green complete all as specified and as directed.

Material & Labour for plain cement concrete (1:3:6) type B1 (using 20 mm graded crushed stone aggregate), 50mm thick as in sub-base to receive floor finishes complete all as specified and as directed.

M&L chequered cement concrete tile 20CM x 20CM x 19 to 20 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L including preparation and treating two coats of cement base paint over a coat of primer to newly plastered wall surface complete all as specified and as directed.

Material and labour for vitrified tiles, of 10 mm thick, (square/rectangular) polished, light shade, area of each tile not exceeding 0.36 square metre but not exceeding 0.42 Sqm, in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match laid over screed bed of 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

All as per item No 98 above but as in skirting over 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Material and labour for roughening the old concrete roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust etc and applying a coat of neat cement slurry at the rate of 3 Kilo gram per square metre complete all as specified and as directed

Taking down the existing unserviceable point wiring of any description, type, size of light or fan or power or two way or bell etc on TW batten or conduit including removal of batten or conduit or gutters or wooden boards or switches or sockets or regulators or light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall or ceiling to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked on concealed etc., with new sunk type pressed steel terminal boxes suitable for switches duly painted with two coats of red oxide zinc chrome primer with suitable hylam sheet cover of suitable size for mounting of switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light / bell point controlled by one, one way switch 5 amps, single pole.

(b) One ceiling fan/exhaust fan point controlled by one, one way switch 5 amps, single pole and regulator

All as per item No. 2.00 here in before but using 2.5 square millimetre single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade FRLS confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 2.5 square millimetre copper conductor PVC insulated cable FRLS as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

Supply and fix switch piano, single pole one way, flush type, 5 Amps 230 volts for light, fan and tube light complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, multipurpose 6 pin of 15 amps, flush type complete all as specified and as directed.

Supply and fix Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed.

Supply and fix Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed.

Supply and fix wall mounted indus plus LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with necessary mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W including taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : C&S cat No - LTIC00120WLED/WD, Havells cat No-REGALBATTENT8UPTO1X22WSSBSWH incl Tube Rod cat No-PHOTONULTRA2.01213T8SSTL20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE.

Supply anf fix in replacement LED security light luminaire fitting of 1x25 watts with deep drawn housing including all accessories and LED lamp 25W with suitable 40 mm dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and as directed. Make - C&S Cat No - LTESSE25WLED, Havells CAt No - ENDURAPEARLSL25WLED757SASYTOPCMP, Wipro Cat No LLR06-311-XXX-57-XX as approved by GE

Supply and fix sheet metal enclosure MCB DB SPN 6 Way with 200 Amps rated bus bar of 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed. Make : Havells - CAT Part No DHDPSHODRWO6, Standard Cat No - DSDCSHODOW06, C&S Cat No - CSDBSPNPDD06.

Supply and fix MCB SPN 40 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed. Make : Havells Cat No DHMGCSNF040, Standard Cat No - DSMGCNF040, C&S Cat No - CSMBS1C40N.

Supply and fix MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed. Make : Havells - Cat No DHMGCSPF006-032, Standard Cat No - DSMGCSPF006-032, C&S Cat No - CSMBS1C6-32.

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.

Supply laying or fixing or passing through pipe, 1100volts grade heavy duty cable with PVC insulated aluminium stranded served with inner sheathing of PVC tapeand overall PVC insulated in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire of size 16 sqmm two single core cable complete all as specified and as directed.

Supply and fix Exhaust fan heavy duty, metal body, 300mm sweep, 900 RPM 230 volts AC Supply with louvers including opening in wall and fixing arrangement with nut bolts and making good the disturbed surface complete all as specified and as directed. Make Havells Cat No- Turbo Force SP equivalent in Bajaj/CG.

Dismantling of asbestos cement sheet (corrugated or semi corrugated) in roof covering complete all as specified and as directed. Note :- Dismantling will have to be carried out in patches of area as ordered by Engr-in-charge

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed.

Supply and fix hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling or riveting etc and similar work confirming to Fe-410-0 of Fe-310-0 of Gde E-165 complete all as specified and as directed.

M&L for plain cement 1:2:4, type B1 using 20 mm grade stone aggregate as in bed block, coping, roof kerb etc,. Including necessary form work complete all as specified and as directed.

Material and labour for painting steel surfaces of any description, not exceeding 10 centimetre width or girth when unconnected with other painting (different tint) and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed.

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M & L for preparing old distempered surfaces of walls, by washing, rubbing down, stopping and applying one coat of distemper oil emulsion of any colour complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed.

Cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 exceeding Half brick wall and not exceeding one brick wall complete all as specified and as directed.

S & F mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and as directed.

M&L crushed stone dust filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade etc complete all as specified and as directed.

S & F 150mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for pre cast Machine pressed cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc of any section indicated size & shape shall be complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered including necessary for form work complete all as specified and as directed.

Removing excavated materials/ debris out side MOD land and exceeding 250m but not exceeding 500m depositing where directed complete all as specified and as directed.

SURA INFRASTRUCTURE

R G NAIDU CIVIL CONTRACTOR AND BUILDERS