Annual repairs, maintenance including renovation of Suit No. (3), (4) (5), caretaker Room and common Toilets including repairs to 10Nos of Old damaged sofas at FF, CTO, SECUNDERABAD

Amount

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Providing and fixing bright finished brass handles with screws etc. complete: 100 mm

Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 90 mm.

French spirit polishing :

One or more coats on old work.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 450x160x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass screws and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Cleaning, washing and mopping of floors in rooms of IQ's, Dado & platform in kitchen, flooring & dado in Toilets/ washrooms by scrubbing with wire brush, cleaning with detergent, liquids and water etc., disposal of rubbish, garbage outside the compound complete and as directed by the Engineer-in-charge.

a) Cleaning of room

b) Cleaning of washrooms/toilets

Charges for carrying out necessary repairs to double Cot Bed of Size 2.00x2.15m.,to make it to useable condition by replacing the damaged plywood or teak wood with new similar material . Rate includes cost of necessary screws, bolts, nails etc. required for repairing the bed but excludes the cost of plywood or any other type of wood which shall be paid seperately complete etc., as per the directions of E-in-C.

Supply,fixing 8mm thick SLEEK grid with Gypsum PVC false ceiling of approved, design and patterns in true horizontal level suspended on interlocking level metal powder coated T-Grid sleek frame work Connected to ceiling with GI wire and anchor fastner at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.

Closing the openings made due to the removal of tube light fittings from the false ceiling with the same type of false ceiling material and making good to match with the existing false ceiling surface complete etc as per direction of Engineer-in -Charge.

Providing and fixing clips in powder coated Aluminium frame for fixing of louvers.

Providing and fixing 100mm wide vertical venetian blinds of approved shade, colour, fabric along with all hardware as per manufacturers specification etc., of 'VISTA' or equivalent all complete as per the directions of Engineer-In-Charge. Rate includes cost of control unit, runners, tilter, transverse cord, tilt rod, bottom mechanism such as bottom weight, bottom chain etc., complete.equivalent all complete as per the directions of Engineer-In-Charge. Rate includes cost of control unit, runners, tilter, transverse cord, tilt rod, bottom mechanism such as bottom weight, bottom chain etc., complete.

Charges for arranging carpenter / plumber along with helper for attending Carpentry/Plumbing and other petty repair works in the compound etc., complete as per directions of Engineer - in - charge.

Proving and fixing C.P Brass Two in One bib cock of Jaquar make Model No OPP-15041PM or equivalent brand as approved by Engineer - n - charge. a)15mm dia.

Proving and fixing C.P Brass Health faucet of Jaquar make or equivalent brand as approbed by Engineer - in -charge. 15mm dia.

P/F 12 mm thick glass shelve of size about 860X180X120 mm with rounding off edges supported on SS brackets with CP brass brackets complete fixed with 40mm long screws in rawl plugs etc., complete standard make alround the mirror

Removal of Corroded MS Ventilator with frame of Size 1.50X0.7m with extension of 0.75X0.42m from toilets by using welding machine at site and deducting the scrap value or credit value for taking away of the dismanled material from the site all complete etc., as directed by Engineer-in-charge

Providing and fixing 12mm thick BWP Plywood of approved brand and manufacture for closing of opening complete etc.as per the directions of E-in-C

Providing necessary repairs for the Existing Sofas by removing the old damaged Sofa Clothes including removal of old Sponge, Cushions, and replacing with new Sponge (Foam ) of 40 density for the Bottom sitting places and sponge (foam) for backing with 2 inches sponge ( foam ) etc., The Sofa Cloth should be provided with approved colour of DARPHAN or equivalent fabric and Bottom is Covered with 12 mm thick Commerical ply wood, all wooden members shall be Polished with Asian Polish for getting New Look of Sofas.all Complete as per the Directions of Engineer in Charge. (Cost includes All no extra will be paid).

a) For Sofas (3+1+1)

b) For Sofas (3+2+2)