REPAIR/MAINT/REPLACEMENT OF WATER SUPPLY DISTRIBUTION PIPE LINE IN THE AREA AGE E/M (HOSP) UNDER GE E/M LUCKNOW

Amount

Taking up or down unserviceble/corroded steel tubing and connections of 15 mm bore complete all as specified and directed. Note: - Earth work will be measured and paid separatly.

All as per item No 01 above but 20 mm bore

All as per item No 01 above but 25 mm bore

All as per item No 01 above but 40 mm bore

All as per item No 01 above but 50 mm bore

All as per item No 01 above but 80 mm bore

Supply, Fixing and testing of Medium grade steel tubing with and including GI fittings (ISI Marked) and connecting in new or old position (wall,ceiling,floors etc) of 15 mm bore nominal dia, complete all as specified and directed.

All as per item No 07 above but 20 mm bore

All as per item No 07 above but 25 mm bore

All as per item No 07 above but 40 mm bore

All as per item No 07 above but 50 mm bore

All as per item No 07 above but 80 mm bore

Taking up worn out rusted cast iron water mains (including all fittings) with spigot & socketed ends and lead joints including burning out joints and recovering lead for the 100 mm bore bore, complete all as specified and directed. (Note: - Earth work will be measured and paid separatly.)

All as per item No 13 above but 150 mm bore

Suplying, laying and testing of Ductile Iron water pipe Centrifugally Cast (Spun) having one end Socket and other end spigot inner pipe having cement motor lining with epoxy coating and other side having Bituminous coating, class K-9 all as per IS-8229-2000, ISI marked of 100 mm bore size, complete all as specified and directed. (Note :- Push-on Rubber joint will be measured and paid separately)

All as per item No 15 above but 150 mm bore

M&L for push-on-joint with rubber gasket after cleaning grooves of DI pipe and applying best quality grease for jointing the DI pipe of 100 mm bore size, complete all as specified and directed.

All as per item No 17 above but 150 mm bore

Material and labour for repair of water leakage in exsting GI pipe of 15 mm bore size at in the area of the AGE E/M Hosp with socket, union, bends and TEE etc. complete all as specified and directed. Note - All Man power, T&P , all type of GI fitings joint mtrl including earth wk etc as required for repair leakge pipe line shall be provided and cost are included in quoted rate by contractor.

All as per item No 19 above but 20 mm bore

All as per item No 19 above but 25 mm bore

All as per item No 19 above but 40 mm bore

All as per item No 19 above but 50 mm bore

All as per item No 19 above but 80 mm bore

All as per item No 19 above but 100 mm bore

All as per item No 19 above but 150 mm bore

Material & labour in replacement sluice valve heavy duty both ends flanged class "PN 1.6" with stainless steel spindle and check nuts cast iron operating wheel IS-14846 and with and including nuts, bolts, washers, gaskets etc and dismantling of old unserviceable sluice valve of size 80 mm bore, complete all as specified and directed.

All as per item No 27 above but 100 mm bore, PN 1.6

All as per item No 27 above but 150 mm bore, PN 1.6

S & F (in repairs/replecment) Gun metal gate valve , Class -1,ISI marked complete with iron wheel head, screwed both ends for iron pipe of 15 mm bore sizes complete all as specified and directed.

All as per item No 30 above but 20 mm bore

All as per item No 30 above but 25 mm bore

All as per item No 30 above but 40 mm bore

All as per item No 30 above but 50 mm bore

Cutting of road ( in hard /dense soil) for laying pipe line or repairs to pipes / lead joints etc. of any size upto 1 metre depth making good matches with existing surface of the road complete all as specified and directed.

Repairing of leaked / dameged farrule connection and redrilling and tapping cast iron/ mild steel water mains ( in position ) for branch connections including supply of GI nipple of medium grade pipe,150mm long of 15 mm bore bore complete all as specified and directed. (Note: - Necessary earth work and proper compaction of surface shall be included in quoted rate).

All as per item No 36 above but 20 mm bore

Material and labour for repairing of water leakage CI/DI joints at any location in the premises of AGE E/M (Hosp) by excavating the effected area at least 5mtr long, 0.5 mtr width and 01 mt depth making workable space for manpower, cleaning the damaged pipe, burning out lead with the blower and repair the leakege by making lead joints, welding or any solution required at site to stop the leakage 80 mm bore complete all as specified and directed. Note - Cost of All the labour, T&P , Material, Items, execavation,reffilling the sites etc is deemed included in the cost of unit rate quoted by contractor.

All as per item No 38 above but 100 mm bore

All as per item No 38 above but 150 mm bore

Excavation in trenches not exceeding 1.5 mtr wide not exceeding 1.5 mtr depth in soft/loose soil and getting out for removing/laying of pipe lines complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material and labour for dismantling existing damaged sluice valve pit and construction of brick masonary valve pit of size 90cm x 90cm x 90cm (internal demension) complete with 50x50x6mm angle iron frame, with 3.15mm thick MS cover sheet with hinges, sliding type lifting handle of MS bar 12 mm dia with locking arrangement heavy duty duly welded with angle iron frame complete including necessary excavation and earth work, PCC (1:2:4,) type B-1 (using 20mm graded agregate) as in coping, 15mm thick internal plaster in CM (1:4) 75mm thick PCC (1:4:8), type D-2 (using 40mm graded agregate)lean concrete over 75mm thick hard core over rammed earth, flooring shall be 40mm thick PCC (1:2:4) type B-1(using 20mm graded agregate) all steel surfaces shall be painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

All as per item No 44 above but having internal dimansion volve pit of size 120cmx120cmx90cm

Supplying and fixing Ductile Iron specials class K-12, 1.6PN suitable for spigot and socket end pipes such as bends, pieces, collar, sockets caps and plugs etc., suitable for 100/150mm bore DI pipes complete all as specified and directed.

Cleaning of Over head tank / reservoir of any staging of Capacity of 50000 gallons by draining out water, removing the silt / mud from inside, cleaning the internal surfaces of wall / ceiling / floors by using wire brushes, removing silt / sludge, complete drying the floor area by cleaning with anti bacterial agent (solution to be prepared in water @ 0.20 Kg of bleaching powder/ washing soda per sqm of internal area) at internal surfaces for making bacterial free, applying two coats of white wash on whole internal surfaces including making necessary writing the details of date of cleaning of over head tank and next due date of cleaning with synthetic enamel white paint over one coat of black painted surface complete all as specified and directed.

Cast Iron Non return valve, swing type flanged and drilled type ISI marked with complete fixing accessories like nuts, bolts, packing material gasket etc including taking down existing unservicble valves complete all as specified and as directed and as per IS:5312 Part-I of 80 mm bore , PN 1.6 size, complete all as specified and directed.

All as per item No 48 above but 100 mm bore , PN 1.6

All as per item No 48 above but 150 mm bore , PN 1.6

B.S.S.ENTERPRISES

M/s Bajpai Constructions

OM NAMAH SHIVAY ENTERPRISES

Spectrum Enterprises

Shree Kanth Technologies

m/s pal associates

MTR GROUP & COMPANY

M/S ANIL ARORA

M/S SWATI CONSTRUCTION

M/s A.P. Enterprises