Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC SANTOKH VILA 81 1ST FLOOR PHASE XI MOHALI PUNJAB 160082 | 160082 | ₹30.3 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹35.8 L+₹5.6 L (18.4%)Rejected-AOC 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | ₹35.8 L+₹5.6 L (18.4%) | L2 | Rejected-AOC Rejected |
| 3 | L3₹36.7 L+₹6.5 L (21.4%)Rejected-AOC 1597 1ST FLOOR SECTOR 45 BURAIL CHANDIGARH CHANDIGARH 160047 | CHANDIGARH | CHANDIGARH | 160047 | ₹36.7 L+₹6.5 L (21.4%) | L3 | Rejected-AOC Rejected |
| 4 | L4₹39.8 L+₹9.5 L (31.4%)Rejected-AOC SCO 1 SECTOR 5 MANSA DEVI COMPLEX PANCHKULA HARYANA | PANCHKULA | HARYANA | 133301 | ₹39.8 L+₹9.5 L (31.4%) | L4 | Rejected-AOC Rejected |
| 5 | L5₹40.4 L+₹10.2 L (33.6%)Rejected-AOC 6146 HIRA CHOWK SIRKI BAZAR BATHINDA PB 151005 | BATHINDA | PUNJAB | 151005 | ₹40.4 L+₹10.2 L (33.6%) | L5 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | chahalbuilders L1 | ADP Engineering L3 | M/s Super Trading Corporation L2 | PARVEEN KUMAR AND SONS L4 | B B BUILDERS L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.all as specified and directed by Engineer - in - Charge . | 28 | Per X.Sqm | 20 ₹560 Lowest | 200 ₹5,600 | 250 ₹7,000 | 100 ₹2,800 | 100 ₹2,800 |
| 2.00 | M & L Baroda Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 15 mm thick screed bed cement mortar 1:4 all as specified and directed by Engineer-in-Charge. | 150 | Sqm | 1,135 ₹1,70,250 | 1,200 ₹1,80,000 | 1,400 ₹2,10,000 | 1,050 ₹1,57,500 Lowest | 1,500 ₹2,25,000 |
| 3.00 | M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement mortar 1:4 all as specified and directed by Engineer - in - Charge . | 60 | Sqm | 1,400 ₹84,000 Lowest | 2,000 ₹1,20,000 | 1,800 ₹1,08,000 | 3,100 ₹1,86,000 | 2,200 ₹1,32,000 |
| 4.00 | Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed. all as specified and directed by Engineer - in - Charge. | 25 | Running Metre | 50 ₹1,250 | 50 ₹1,250 | 40 ₹1,000 Lowest | 100 ₹2,500 | 100 ₹2,500 |
| 5.00 | M & L machine cut Kota stone slab flooring 20 – 25mm thick over and including cement screed base 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer - in – Charge. | 75 | Sqm | 945 ₹70,875 | 800 ₹60,000 | 1,000 ₹75,000 | 1,080 ₹81,000 | 760 ₹57,000 Lowest |
| 6.00 | Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge . | 2 | Cum | 100 ₹200 Lowest | 200 ₹400 | 1,250 ₹2,500 | 160 ₹320 | 100 ₹200 Lowest |
| 7.00 | M & L RCC 1:2:4, (nominal mix), type B-1using 20mm graded stone aggregates as in slabs, lintels, chajjas, the like etc all as specified and directed by Engineer - in - Charge . | 2 | Cum | 3,500 ₹7,000 Lowest | 6,000 ₹12,000 | 5,000 ₹10,000 | 4,500 ₹9,000 | 5,000 ₹10,000 |
| 8.00 | M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge . | 140 | Kg | 68 ₹9,520 Lowest | 100 ₹14,000 | 90 ₹12,600 | 76 ₹10,640 | 100 ₹14,000 |
| 9.00 | Demolition of brick work built in cement mortar all as specified and directed by Engineer - in - Charge. | 2 | Cum | 100 ₹200 Lowest | 200 ₹400 | 450 ₹900 | 200 ₹400 | 100 ₹200 Lowest |
| 10.00 | M&L Brick work with sub class 'B' old size burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . | 2 | Cum | 1,999 ₹3,998 Lowest | 5,000 ₹10,000 | 4,500 ₹9,000 | 4,200 ₹8,400 | 3,000 ₹6,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Jul 2025, 6:00 pmClosed
Garrison Engineer
GE (U) Chandimandir Pin-134107
CA NO GE(U)/CHM-30/2025-26 CERTAIN REPAIRS TO JOINERY, FLOORING, WALL TILING, FALSE CEILING, WALL PANELLING WORK ETC IN GROUND FLOOR AND FIRST FLOOR OF COMMAND HOSPITAL AND OTHER VARIOUS LOCATION UNDER AGE B/R (CH) OF GE(U) CHANDIMANDIR
2025_MES_716000_1
GE(U)/CHM-30/2025-26
Open Tender
Civil Works
Item Rate
240 days
GE (U) Chandimandir
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
GE (U) Chandimandir
₹90,000
Yes
3 Oct 2025
21 Jun 2025
25 Jul 2025
21 Jun 2025
21 Jul 2025
7 Jul 2025
Amount
Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.all as specified and directed by Engineer - in - Charge .
M & L Baroda Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 15 mm thick screed bed cement mortar 1:4 all as specified and directed by Engineer-in-Charge.
M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement mortar 1:4 all as specified and directed by Engineer - in - Charge .
Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed. all as specified and directed by Engineer - in - Charge.
M & L machine cut Kota stone slab flooring 20 – 25mm thick over and including cement screed base 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer - in – Charge.
Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .
M & L RCC 1:2:4, (nominal mix), type B-1using 20mm graded stone aggregates as in slabs, lintels, chajjas, the like etc all as specified and directed by Engineer - in - Charge .
M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge .
Demolition of brick work built in cement mortar all as specified and directed by Engineer - in - Charge.
M&L Brick work with sub class 'B' old size burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge
Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed by Engineer - in - Charge.
Taking down shutters of any description not exceeding 1.0 Sqm each all as specified and directed by Engineer - in - Charge .
Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm each all as specified and directed by Engineer - in - Charge .
S & F Solid PVC door frame factory made of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube jointed , supplying and fixing in opening complete all as specified and as directed by Engineer-in-Charge
Factory made solid panel PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.
S & F flush shutter 35mm thick solid core construction with particle board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge.
S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24 (a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge .
S&F PVC wall panelling, hollow cored, 5mm thick, decorative designs with smooths surfaces, fire resistant, water and heat proof, tongue and groove edge for easy assembly with all accessories such as U cap, end cap, tee, plugs, fillets and screws etc as per manufactures instructions and fixing complete all as specified & directed by Engineer - in - Charge.
S & F Butt hinges, 100mm size extruded brass, with brass hinge pin, bright polished and fixed, type B-11 all as specified and directed by Engineer - in - Charge .
S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed by Engineer - in - Charge
S & F extruded aluminium alloy handles, fabricated type anodised, 150mm long all as specified and directed by Engineer - in - Charge.
S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed by Engineer - in – Charge .
S & F floor door stopper 150mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed by Engineer - in - Charge.
S & F in repairs curtain rods 20mm dia of mild steel chromium plated with fixing brackets, stop rollers etc. all as specified and directed by Engineer - in - Charge.
S & F bright finished Aluminium 100 mm mortice lock with four levers vertical type with necessary screws etc complete all as specified and directed by Engineer - in - Charge.
S&F as in repairs door closer hydraulically regulated, aluminium (extruded section) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width and of weight 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.
S & F brackets brass chromium plated fancy type for curtain rods complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges includiing brackets complete all as specified and directed by Engineer - in - Charge .
S&F anodized aluminium frame with Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc., with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.
S&F Anodised aluminium door shutters with Powder Coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge.
S&F anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.
M & L one coat of distemper oil emulsion on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer - in - Charge .
M & L two coats of distemper oil emulsion on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer - in - Charge .
M & L two coats of distemper oil emulsion over a coat of primer and wall putty (Asian / JK / Birla), preparatory to distempering, on newly plastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge.
M & L one coat of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .
M & L for 3mm thick ACP sheet of approved color as in doors, windows and partitions fixing with Aluminium beading or as per manufacturer's instruction including joint filling and tapping with necessary arrangement complete all as specified and directed by Engineer - in - Charge.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over plastered or unplastered or concrete surfaces including preparation of surfaces by removal of existing treatment complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge.
M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & fair without using extra cement all as specified and directed by Engineer - in - Charge .
M & L providing two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge.
S & F as in replacement framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work for water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge.
Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in – Charge.
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
M& L light shade/Double Charged/ultracharged Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4.
All as per Srl item No. 50 here-in-before but on vertical surface such as skirting, dado over and including 10mm thick cement sand plaster (1:4) etc complete all as specified and directed by Engineer - in - Charge.
M & L 25 mm thick Cement Conrete 1:2:4 type B–0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed by Engineer - in – Charge .
Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.
S & F 15mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .
Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed by Engineer-in - Charge.
S & F as in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S&F as in repairs bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed by Engineer – in – Charge .
S&F as in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including trap set complete all as specified and directed.
S&F as in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.
S & F as in repair vitreous china wash basin, white, flat back, size 550x400mm including waste fitting brass chromium plated, PVC connection and PVC waste pipe and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed by Engineer - in – Charge .
S&F PVC (SWR) soil waste and vent pipes single socketed 110mm dia bore in any length with rubber ring joints, fixed to walls, laid in trenches or in floorscomplete all as specified and directed
S&F PVC (SWR) soil waste and vent pipes single socketed 75mm dia bore in any length with rubber ring joints, fixed to walls, laid in trenches or in floors complete all as specified and directed
S&F PVC (SWR) soil waste and vent pipes single socketed 50mm dia bore in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F PVC (SWR) bends any radius bore of 50 mm with access door all as specified and directed by Engineer - in - Charge
S&F PVC (SWR) bends any radius bore of 75 mm with access door all as specified and directed by Engineer - in - Charge
S&F PVC (SWR) bends any radius bore of 110 mm with access door all as specified and directed by Engineer - in - Charge
S & F as in repairs vitreous china wash down water closet pan (Pedestal Pattern), white including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device and fixing with all joints to WC pan all as specified and directed by Engineer - in - Charge .
S&F as in repairs toilet metropole flush valve dual flow 32mm size (concealed body) with exposed shut off provision & 100mm square plate for urinal pots/ WC screwed for iron pipe and fixed all as specified and directed by Engineer-in-Charge.
S & F as in repairs urinals pots size 385 x 325 x 635mm including all accessories fixed all as specified and directed.
S&F as in repairs 1 mm thick Aluminium strip 200 mm wide as in crumple joints strip with all necessary suitable rawal plug and screws fixed upto fifth floor of building all as specified and directed by Engineer-in-Charge.
S&F as in repairs Pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engineer – in – Charge .
S & F as in repairs soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge.
S&F as in repairs 15mm bore central hole basin mixer chromium plated brass for mixing hot & cold water screwed down for iron pipe and fixed as specified and directed by Engineer – in – Charge .
S & F as in repairs 15mm bore stop valve, cast copper alloy screwed down, fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge.
S & F as in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste fittings, waste pipe, cast iron cantilever brackets, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm with waste pipe PVC 40mm dia all as specified and directed by Engineer-in-Charge.
S & F as in repairs PVC flexible waste pipe of standard length 25mm dia. with PVC cap suitable for waste coupling all as specified and directed by Engineer - in - Charge .
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed by Engineer - in - Charge.
S & F anodized aluminium snap grid frame work for false ceiling size of grid 605 x 605mm all as specified and directed by Engineer - in - Charge.
M & L perforated particle board / tiles 12mm thick for insulation and acoustic purpose 60 x 60cm size fixed with screw to aluminium frame work or staples on snap grid in ceiling complete all as specified and directed by Engineer - in - Charge.
Dismantling of PVC pipes and taking out from trenches / floors etc.100 / 75 / 50 mm bore all as specified and directed by Engineer - in - Charge .
M/s Super Trading Corporation (BID ID -3366353)
ADP Engineering (BID ID -3358021)
PARVEEN KUMAR AND SONS (BID ID -3366691)
B B BUILDERS (BID ID -3365890)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .