Special Repairs to CF Buildings, Ferozepur Cantt.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out (Soft/Loose soil)

Cement concrete in in walls or retaining walls, any thickness, size or shape including pilasters, uttresses columns, pillars, boundary pillars and posts (including caps and bases) 1:5:10 in foundation (40mm graded)

Brick work sub class B brick in cement sand mortar 1:6 as in walls

40mm thick DPC Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)

Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Cement Concrete TypeB0 1:2:4 (12.5mm graded aggregate)

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be paid for under item 07010) rough finished surfaces of concrete.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT Bars)

Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement)

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed Add to item 03033 for each additional 1 km or part thereof, beyond 5 km upto total distance of 15 km

Cement concrete in foundations, filling and mass concrete Type F2, 1:7:12 (40 mm graded aggregate)

Glazed earthenware tiles 149mmx 149mm (or 152.4mm x 152.4 mm) x 6mm thick, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match Coloured tiles

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles

40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, Size 125 x 60mm

S&F: Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F: Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde-E-250) Quality-A.

S&F: Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Fe 410-W (Gde-E-250) Quality-A.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with Grey Cement and no pigment

M&L: Sand filling under floors or in foundations including watering and consolidation

Earth filling under floors including spreading, levelling, watering within lead of 10Km

White washing: On walls two coats

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.

Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane 4mm thick

M&L: Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work 18/19 mm thickness

M&L: Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instructions 0.9mm thick

Distempering walls with distemper dry, white or tinted with cement paint work in ceiling 2 coats

Surfaces of any description, not otherwise described, over 10cm width or girth Synthetic enamel (ordinary tint) two coats

M&L: vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

M&L Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

M&L: Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe

S&F: PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm

S&F: PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. CPVC PIPE OUTER DIAMETER 20mm

Vee Vee Enterprises (BID ID -3090112)

HAPPY ELECTRICALS (BID ID -3090612)