REPAIR AND MAINTENANCE OF UNSERVICEABLE WATER SUPPLY DI/GI/CI PIPE LINES FOR DOMESTIC AND SMQ AREA AND SWIMMING POOL/FOUNTAIN FILTER MEDIA AND CONNECTED ITEMS OF POOL AT AF STN BHISIANA

M&L for Plain Cement Concrete 1:3:6 type C1 (using 20 mm stone aggregate) for making foundation /support of pipe line for placing of rotational moulded polyethylene water storage tanks of capacity 500 Ltrs, complete all as specified and directed by Engineer in charge.

S&F of rotational moulded polyethylene water storage tanks of capacity 500 Ltrs 3 layers white colour (cylindrical vertical with closed top) hoisted and fixed in position including all accessories and 20mm bore PTMT float valve with PVC ball after taking down existing down UNSV water tank, complete all as specified and directed by Engineer in charge.

S&F of rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs 3 layers white colour (cylindrical vertical with closed top) hoisted and fixed in position including all accessories and 20mm bore PTMT float valve with PVC ball after taking down existing down UNSV water tank, complete all as specified and directed by Engineer in charge.

S&F of CI body Sluice valve PN 1.6 conforming to IS of size 80 dia complete with nuts, bolts, rubber gaskets etc including, ISI marked, including jointing material such as rubber gasket, bolts, nuts, etc suitable for size 80 mm after taking out old UNSV sluice valve, complete all as specified and directed by Engineer in charge.

All as per Srl No. 4 above here-in-before but of size 100mm

All as per Srl No. 4 above here-in-before but of size 150mm

All as per Srl No. 4 above here-in-before but of size 200mm

All as per Srl No. 4 above here-in-before but of size 250mm

All as per Srl No. 4 above here-in-before but of size 300mm

S&F in repairs 80 mm bore foot valve, nitrite ball type, cast iron body, flanged type, conforming to relevant IS 4038 with rubber gaskets, MS nuts, bolts, washers, etc., as required and testing complete including taking down the existing unserviceable foot valve, complete all as specified and directed by Engineer in charge.

All as per Srl No. 5 above here-in-before but of size 100mm

All as per Srl No. 5 above here-in-before but of size 150mm

S&F in repair CI body NRV ISI mark of size 50 dia complete with nuts, bolts, rubber gaskets etc including, testing, complete all as specified and directed by Engineer in charge.

All as per Srl No. 6 above here-in-before but of size 80mm

All as per Srl No. 6 above here-in-before but of size 100mm

All as per Srl No. 6 above here-in-before but of size 150mm

All as per Srl No. 6 above here-in-before but of size 200mm

All as per Srl No. 6 above here-in-before but of size 250mm

S&F in repair/replacement of 80 mm bore Air release valve cast iron body, as per existing model/ type, conforming to relevant IS marked with rubber gaskets, MS nuts, bolts, washers, etc., as required and testing complete including taking down the existing unserviceablefoot valve, complete all as specified and directed by Engineer in charge.

All as per Srl No. 7 above here-in-before but of size 100mm

All as per Srl No. 7 above here-in-before but of size 150mm

All as per Srl No. 7 above here-in-before but of size 200mm

All as per Srl No. 7 above here-in-before but of size 250mm

All as per Srl No. 7 above here-in-before but of size 300mm

Supply and laying 100 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches, complete all as specified and directed by Engineer in charge.

All as per Srl No. 8 above here-in-before but of size 80mm

All as per Srl No. 8 above here-in-before but of size 50mm

All as per Srl No. 8 above here-in-before but of size 40mm

All as per Srl No. 8 above here-in-before but of size 25mm

All as per Srl No. 8 above here-in-before but of size 20mm

All as per Srl No. 8 above here-in-before but of size 15mm

Taking up or down U/S GI tubing and connection 100 mm size

Taking up or down U/S GI tubing and connection 80 mm size

Taking up or down U/S GI tubing and connection 40/50 mm size

Taking up or down U/S GI tubing and connection 25 mm size

Taking up or down U/S GI tubing and connection 20 mm size

Taking up or down U/S GI tubing and connection 15 mm size

Supply and laying cast iron pipes 100 mm dia with spigot and socket ends centrifugally cast, class 'B' in any length laid in trenches, complete all as specified and directed by Engineer in charge.

All as per Srl No. 15 above here-in-before but of size 150mm

All as per Srl No. 15 above here-in-before but of size 200mm

Taking down U/S CI pipe of 100 mm dia including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer in charge.

All as per Srl No. 16 above here-in-before but of size 150mm

All as per Srl No. 16 above here-in-before but of size 200mm

S&F cast iron fittings like bends, tee, tail pieces collars etc, spigot socketed and flanged ends type etc confirming IS upto 150 mm bore pipes including taking out old UNSV CI fittings, complete all as specified and directed by Engineer in charge. (Note: Lead joints Earth works will be measured and paid separately)

S&F cast iron fittings like bends, tee, tail pieces collars etc, spigot socketed and flanged ends type etc confirming IS 200 to 300 mm bore pipes including taking out old UNSV CI fittings, complete all as specified and directed by Engineer in charge. (Note : Lead joints Earth works will be measured and paid separately)

Supply and laying DI Pipe line 100 mm dia pipe including all fittings such as end cap, Titan joint, flanged, nut bolts, rubber joint etc including taking out old UNSV pipe, complete all as specified and directed by Engineer in charge.

All as per Srl No. 19 above here-in-before but of size 150mm

All as per Srl No. 19 above here-in-before but of size 200mm

All as per Srl No. 19 above here-in-before but of size 250mm

All as per Srl No. 19 above here-in-before but of size 300mm

M&L for run lead joints for 300mm dia spigot and socketed CI pipe fittings including spun yarn etc and taking out existing joint if required, complete all as specified and directed by Engineer in charge.

All as per Srl No. 20 above here-in-before but of size 250mm

All as per Srl No. 20 above here-in-before but of size 200mm

All as per Srl No. 20 above here-in-before but of size 150mm

All as per Srl No. 20 above here-in-before but of size 100mm

All as per Srl No. 20 above here-in-before but of size 80mm

M&L for lead wool joints for 300mm dia spigot and socketed CI pipe fittings including spun yarn etc and taking out existing joint if required, complete all as specified and directed by Engineer in charge.

All as per Srl No. 21 above here-in-before but of size 250mm

All as per Srl No. 21 above here-in-before but of size 200mm

All as per Srl No. 21 above here-in-before but of size 150mm

All as per Srl No. 21 above here-in-before but of size 100mm

All as per Srl No. 21 above here-in-before but of size 80mm

M&L for excavation in trenches, not exc 1.5 m wide and not exc. 1.5 m in depth and getting out any type of soil, complete all as specified and directed by Engineer in charge.

M&L for returning filling in including spreading, levelling, watering and ramming in layers not exceeding 25 cm thick with earth obtained from excavation, complete all as specified and directed by Engineer in charge.

M&L for removal of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engineer in charge.

Dismantling of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engineer in charge.

S&F of water pressure gauge 4" dia, 0-14kg rating tamper proof and water proof. Note the cost shall be included making hole in existing GI/DI/MS pipe and new 15 mm GI/CI pipe 0.4 mtr for fixing of pressure gauge making thread in pipe, complete all as specified and directed by Engineer in charge.

Labour for Disconnecting the existing 20mm to 150mm GI pipe as reqd on site, suction and delivery end of any type from the pump set and supply and fixing with new pipes of various material and sizes of pipe given in schedule, complete all as specified and directed by Engineer in charge. The rate shall be included for excavation / removal / refilling up to depth of 0.5 metre below pipe line for finding the leakage in unground pipe line at various location in AF stn Bhisiana.

M&L in replacement of XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 25 Sqmm x 4 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up, testing and commissioning complete including taking down existing unserviceable LT UG cables of any description and size and making good disturbed surfaces, complete all as specified and directed by Engineer in charge. Note: Excavation, earth work, riddled earth cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

M&L in replacement of XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm x 4 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete including taking down existing unserviceable LT UG cables of any description and size and making good disturbed surfaces, complete all as specified and directed by Engineer in charge. Note: Excavation, earth work, riddled earth cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

S&F of Double wall corrugated high density polymer ethyl pipe of size 25mm outer dia with ISI marked (IS 14930- 2001 ), laid in trenches /floors & fixed on wall/ pole with & including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables, complete all as specified and directed by Engineer in charge.

S&F of Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 50 mm bore iron pipe and fixed including testing and taking out existing old UNSV gate valve, complete all as specified and directed by Engineer in charge.

All as per Srl No. 31 above here-in-before but of size 40mm

All as per Srl No. 31 above here-in-before but of size 25mm

All as per Srl No. 31 above here-in-before but of size 20mm

All as per Srl No. 31 above here-in-before but of size 15mm

M&L for brick masonry valve pit (type B) of size 1.2 x1.2 x 1.2 mtr (internal of chamber ) depth of chamber to be reckoned from the top of PCC in foundation to top the MS cover as 1.5 mtr and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 mm x 40 mm 6 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synthetic enamel paint over a coat of red oxide primer on MS cover and frame, including necessary excavation and earth work in any type of soil, returning, filling in approved soil disposal of surplus soil to a distance not exc.50 mtr, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, brick work in cement motor (1:6) 15 mm thick plastering in cement mortar (1:4) (both internally and externally) 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in flooring, complete all as specified and directed by Engineer in charge.

All as per Srl No. 77 above here-in-before but of size 1.5x1.5x1.2Mtr.

All as per Srl No. 77 above here-in-before but of size 0.9x0.9x0.9Mtr.

Earthing complete with GI earth plates electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcoal dust mixed with salts to a packet thickness of 15 cm all around the plate, using GI earth strip 32x6mm connected to earth plate by means of nut ,bolts and washers as directed GI pipe light grade 50mm bore on water pipe from earth chamber to copper edge of earth plate,CI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in pit chamber and RCC pit cover 50mm thick pre-cost RCC 1:2:4 type B-1 dully reinforced with MS bars 6mm dia @150 cc both ways with 10mm dia MS bar in lifting handle excavation earth work including laying of GI pipe in walls etcall as directed in electrical plate No 3 of SSR pt-I, complete all as specified and directed by Engineer in charge.

S&F of "X " Hose nipple 50 mm/40 mmx100 mm long including taking out old UNSV fittings, complete all as specified and directed by Engineer in charge.

S&F of "X" Hose nipple suitable for fixing of plastic pipe to gi pipe 25/20mm x 100 mm long including taking out old UNSV fittings, complete all as specified and directed by Engineer in charge.

S&F of MS nuts bolts of required size or sample available at MES Office of glands cover & sluice valves including taking out old UNSV fittings, complete all as specified and directed by Engineer in charge.

Supply only non ferric Alum AL2 (SO4)3 density 2.672g/cm3 appearance white Crystals clear type (transparent) superior grade, complete all as specified and directed by Engineer in charge. NOTE The sample is available in AGE E/M office.

Supply only Calcium based Granular Chlorination Chemical (65-70%) Chlorine Granuals in fine form of good quality Size 2-4 Mesh Appearance : White Granuals Effective Chlorine : 60-70% in liquid form and pore in chlorination plant in to the pump house i,e Main pump House, Mini Pump House, Silver Jublee Aahuja pump house Timing 0400 to 0600 and 1500 hrs to 1700 hrs on daily, all as directed of good quality, complete all as specified and directed by Engineer in charge. NoteThe rate shall be included for labour and material for making liquid form and pouring to dosing plant till completion of contract.

Supply only liquid form of granual of Trichloroisocyanuric Acid (90%) (C3CI3N303) Chlorine Granuals (90%) Size 5-8 Mesh Appearance : White Granuals of pH : 2.7 to 3.3 effective Chlorine : 90% in to the connected plant. Note: The Quoted unit rate shall deemed to be included labour and Material of Chemicals

S&F of Mechanical joint suitable for 200 mm bore CI pipe, including cutting pipe excavation & earth work etc, nuts, bolts and washers, complete all as specified and directed by Engineer in charge.

S&F of Mechanical joint suitable for 150 mm bore CI pipe ,including cutting pipe excavation & earth work etc, nuts, bolts and washers, complete all as specified and directed by Engineer in charge.

S&F of Mechanical joint suitable for 100 mm bore CI pipe, including cutting pipe excavation & earth work etc, nuts, bolts and washers, complete all as specified and directed by Engineer in charge.

S&F Mechanical joint suitable for 80 mm bore CI pipe, including cutting pipe excavation & earth work etc, nuts, bolts and washers, complete all as specified and directed by Engineer in charge.

Supply and replace Jip leather 150 mm suitable for CI foot ball including nut boltd washer rate included for removing and refixing football in to the pipe in sump, complete all as specified and directed by Engineer in charge.

Supply and replace Jip leather 100 mm suitable for CI foot ball including nut boltd washer rate included for removing and refixing football in to the pipe in sump, complete all as specified and directed by Engineer in charge.

Supply and replace Jip leather 80 mm suitable for CI foot ball including nut boltd washer rate included for removing and refixing football in to the pipe in sump, complete all as specified and directed by Engineer in charge.

Supply and replace gasket for 150 mm dia pipe suitable for CI foot ball/Sluice valve including nut bolt washer Rate, complete all as specified and directed by Engineer in charge. Note: included for removing and refixing football in to the pipe in sump

Supply and replace gasket for 100/80 mm dia pipe suitable for CI foot ball/Sluice valve including nut boltd washer rate included for removing and refixing football in to the pipe in sump, complete all as specified and directed by Engineer in charge.

S&F of MS clamp 100/80 mm dia pipe 08 inch long with rubber suitable size nut bolts washer including taking down old unserviceable clamp, complete all as specified and directed by Engineer in charge.

S&F of MS clamp 50/40 mm dia pipe 06 inch long with rubber suitable size and nut bolts washer including taking down old unserviceable clamp, complete all as specified and directed by Engineer in charge.

S&F of rubber sheet size 3 mm after taking down old UNSV, complete all as specified and directed by Engineer in charge.

Supply and fill pump set bearing Grease in various motor/pump, complete all as specified and directed by Engineer in charge.

Supply and fill resin & hardener, complete all as specified and directed by Engineer in charge.

S&F in repair of Astral Pool Maxim pump motor for swimming pool, electrical insulation, 2.6KW/3.5HP, 440Volt class F IP-55, floor rate 56m3/h all accessories, complete all as specified and directed by Engineer in charge.

Dismantling/ taking down pump motor set any type, capacity upto 10HP from foundation after disconnecting of discharge, suction and induction motor connection and shifting to the same to civil workshop at bathinda for the following repair :- (a) Dismantling the complete pump motor and taken out main shaft and impeller from the pump by disconnection of all nuts, bolts and washer and minor repair and balancing of main shaft and impeller by necessary lathe and machine work and replacement with complete new gasket and mild steel nut, bolt, check nut and washer complete all as directed. (b) Replacement of ball bearing NBC 6312 including providing of required grease complete-04Nos (c) Re-assembling the complete and fixing at site and connection of suction, discharge and the induction motor and testing the same on full load, complete all as specified and directed by Engineer in charge.

M&L for Rewinding of pump motor 415 Volt 3 phase of capacity upto 10HP motor after disconnecting electric cable and eath lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and cleaning the stator slots and core assembly, rewinding to stator and rotor winding with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning, complete all as specified and directed by Engineer in charge.

Note (i) Contractor shall make his own arrangements to access various floors / bldgs and to provide tools and plants for taking down and refixing of of pipe line / fittings of various material. The cost also shall be included for fixing of each fittings such as elbow, union, socket, Tee, Nipple or laying of every 01 mtr pipe of GI/DI/CI in every location/bldgs or each complaints . The rate quoted shall be deemed to include all fittings such as elbow, union, socket, TEE, flange, etc required to rectify complaint in each location. The contractor could not ask at only one or two site for execution of all ca quantities, He will be bound to attend complaint as per user requirement or directed by Enge-In-Charge (ii) Contractor shall arrange 02 fitter and 02 helper for attending of complaint day to day on daily basis they will be report to AGE E/M office on every day at 0800hrs to 1600hrs . If They absent on attending of complaint @1000 recovey will be panelled per day and recovery will be made on RAR/Final bills (iii) Contractor will rectify the defect within 24 hrs receiving the complaints by Phone or message by Rep of GE . If he faild to rectify the complaint within 24 Hrs @500 Rupees will be recovered in RAR/ Final bills (iv) All above mentioned items will be executed each and every meter of pipe in different location / bldg or as directed by Engr-In-Charge. The contractor could not ask at only one or two site for execution of all ca quantities, he will be bound to attend complaint as per user requirement or directed by Enge-In-Charge

Testing of potable water sample collected from Air force stn Bhisina swimming pool and testing report required through Govt/NABL accrediated laboratory as approved by GE as per BIS - 10500-2012. The Following tests shall be carried out as under. (i) Temperature (ii) Turbidity (iii) Colour (iv) Total hardness , Mineral Oil , residual chlorine (v) Calcium (vi) Magnesium (vii) Total Alkalinity (viii) Chloride, Phenolic Compounds (as MBAS) (ix) Total disolved solids (x) Flouride. COD , BOD, E-Coil, bacteria.

Supply and Pouring Non Ferric alum type crystal, white appearance, superior grade after making in liquid form to dosing plant. Note: The quoted unit cost shall deem to be include mixing and dosing on daily basis upto completion of Contract. The quantity of material shall be decided by AGE E/M.

Supply only soda ash best quality, complete all as specified and directed by Engineer in charge. Note: The quoted unit cost shall deem to be include mixing and dosing on daily basis upto completion of Contract. The qunatity of material shall be decided by AGE E/M.

Supply and make liquid form of copper sulphate (BLUE STONE) CuSO4 and pour in to the swimming pool or dosing tank at swimming pool, complete all as specified and directed by Engineer in charge. Note: The quoted unit cost shall deem to be include mixing and dosing on daily basis upto completion of Contract. The quantity of material shall be decided by Engineer in Charge. The Make and sample shall be approved by GE.

Supply and fill in to the connected plant after making in liquid form of granual of Trichloroisocyanuric Acid (90%) (C3CI3N303) Chlorine Granuals (90%) Size 5-8 Mesh Appearance: White Granuals of pH : 2.7 to 3.3 effective Chlorine : 90%. Note: The Quoted unit rate shall deemed to be included labour and Material of Chemical

S&F in replacement of brown sand white quartz sand 16/32" Mesh size, complete all as specified and directed by Engineer in charge.

S&F in replacement of brown sand white quartz sand 1/4" Mesh size, complete all as specified and directed by Engineer in charge.

Taking down electric motor up to 05 HP, 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop, checking the serviceability of ball bearing both side of motor, greasing of bearing up to free rotation of shaft of motor complete, greasing, unserviceable parts, repair/replacement on reassembling the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump, complete all as specified and directed by Engineer in charge.

S&F of ball/roller bearing for motor front and back for shaft of suitable size as required on site, complete all as specified and directed by Engineer in charge.

M&L for Rewinding of motor 415 Volt 3 phase of capacity 05 KW motor after disconnecting electric cable and eath lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and cleaning the stator slots and core assembly, rewinding to stator and rotor winding with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning, complete all as specified and directed by Engineer in charge.

M&L for Disconnecting and again reconnecting of new pipes S&F of any length of 250/200/150/100/75/63 mm CPVC/PVC pipe as per existing lengths on site, suction and delivery of any type from the pump set/header for delivery and side including necessary nuts bolts ,reducer/tee/joint/union, welding works and rubber etc, to filter media tanks, complete all as specified and directed by Engineer in charge. (i) The quoted cost shall deemed to be include dismantling of pipe and fusion joint or any other type joint to make pipe serviceable, Tee, Bends, Sockets, Flange, Nipple, union / adapters, reducer and the cost shall also included suitable arrangement of jointing machine for PVC/CPVC pipe. (ii) Contractor is advised to visit site to acknowledge length of different size pipes before quoting the rate)

Taking out unserviceable starter and Supply and fix three phase Motor starter DOL in sheet steel enclosure suitable for 5 HP capacity submersible pump with relay range 13-18 Amps incorporating heavy duty 4 pole contactor type TC1 -Dx with wide band opening coil overload relay type LR3D with manual re-set and yellow flag for trip indication, complete all as specified and directed by Engineer in charge.

M&L for Painting of installed Machineries at Swimming Pool Pump House by scrapping existing paint and spraying one coat of synthetic enamel paint for following items with using Asian/Berger paint manufacturer, complete all as specified and directed by Engineer in charge. (a) Pump Set :- 05 Nos. (b) Pressure Filter :- 04 Nos. (c) Suction Sweeper :- 01 No.

Taking out unserviceable butter fly valve of size 75/80/100 mm bore and supply and fix new butter fly valve water type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.6 including jointing material such as rubber gasket,bolts,nuts,etc direct integrally, complete all as specified and directed by Engineer in charge.

Taking out unserviceable butter fly valve of size 50/65 mm bore and supply and fix new butter fly valve water type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.6 in including jointing material such as rubber gasket, bolts, nuts, etc direct integrally, complete all as specified and directed by Engineer in charge.

Taking down U/S and supply and fix CPVC pipes with Flange 75 mm dia pipe including all fittings, complete all as specified and directed by Engineer in charge.

Taking out unserviceable and supply and install New multiport valve/butter manifold in PVC with flange (Existing model, size & make) for connecting to filters as per DIN 2501 standard consists of 05 Nos for each job multiport valve/butter fly valve for carrying out filtration, back washing rinsing and shut down of the filters size 80/300 mm, complete all as specified and directed by Engineer in charge. Note: The cost shall be including jointing material such as rubber gasket, bolts, nuts, etc.

Supply in replacement of Swimming Pool Floor Nozzle Inlet Fitting of size 50mm dia/2" Heavy Quality Inlet-White. Including all fitting such as, gasket, seal, nut, bolts. The cost shall be included taking down Under water tiles and dismantling of pool floor PCC for fixing of nozzle and again fixing new tiles if broken tiles during fixing of nozzle and making good and match with disturbed surface, complete all as specified and directed by Engineer in charge. Note: It nozzles fail after filling of water in swimming pool then the contractor will empty the swimming pool on the same day replace the valve and clean the swimming pool without any extra cost.

Taking out unserviceable PVC pipe and Supply and fix transparent blue plastic vacuum hose 40/50 mm bore including hose cuffs for connection to suction inlets suitable metal clamps with nut and bolts, complete all as specified and directed by Engineer in charge. Note The rate shall be included for fixing of pipe/ hose nipple /clamp etc in to the suction sweeper.

Taking out unserviceable and S&F in repair of Transformer/motor with protection suitable to underwater lightning in swimming pool 300VA from 220 V to 12 V, complete all as specified and directed by Engineer in charge.

Taking down U/s and S&F adapter and flange suitable for PVC/CPVC pipe of nominal dia 160mm, complete all as specified and directed by Engineer in charge.

S&F Water check valve dia 110/100 mm suitable for pump inlet, complete all as specified and directed by Engineer in charge.

Taking out and cutting of grass, bushes, hedges upto 4 mtr length small trees upto dia 50mm with roots, bushes, hedges etc including levelling on all sides of swimming pool & surrounding area including growth of other vegetation upto complete entire satisfaction of Engineer-in-Charge and removing the same outside MoD/ AF land, complete all as specified and directed by Engineer in charge. Note: (a) The cost shall be included Removing/ of grass , bushes with root below 30 cm under ground and making smooth surface all as directed by Engr-in-charge

S&F in repairs 100 mm bore foot valve, nitrite ball type, cast iron body, flanged type, conforming to relevant IS 4038 with rubber gaskets, MS nuts, bolts, washers, etc., as required and testing complete including taking down the existing unserviceable foot valve, complete all as specified and directed by Engineer in charge.

M&L in replacement of XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm x 4 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete including taking down existing unserviceable LT UG cables of any description and size and making good disturbed surfaces, complete all as specified and directed by Engineer in charge. Note: Excavation, earth work, riddled earth cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

M&L in replacement of cable/wire of size 2.5 sqmm and Supply & Fixing flexible cable/wire 2.5 sqmm 3core PVC insulated and sheathed submersible type with stranded copper conductor (for Light), complete all as specified and directed by Engineer in charge.

S&F in replacement of sheet metal (MS) bus bar box floor mounted single door, outdoor type weather proof, size 300x300x200mm mounted on ground with iron angles (25x25x4mm) having aluminium bus bar 4 nos, rated 100amp including suitable PCC grouting, complete all as specified and directed by Engineer in charge. Note:- Cost of foundation work is included in rate quoted by contractor.

S&F of Flood light luminaire 150 watt 230 V AC outdoor type with poly carbonate optics die-cast housing, IP66 ingress protection, 4KV in -built and 10 KV external surge protection. Efficacy 110 Im/W complete suitable for input voltage140 Volt to 280 Volt. The LED flood light shall have power factor more than 0.95 , 50000 L70,CRI>70,CCT 5665K ± 355K, THD <10%,IP 66,IK 07, Operating Temperature -10 degree Celsius to 50 degree Celsius ,Beam Angle 70 degree, complete all as specified and directed by Engineer in charge. Bajaj Cat part No. GLATT MT 480L WH PO PC SD or equivalent all as approved by Engineer-in-Charge Note :- (i) Driver and luminaire of LED fitting shall be of same manufacturer (ii) All T&P ie ladder, Tools, Safety glooves etc will be provided by the contractor without any extra cost to height upto 25 mtr. (iii) If same capacity is not available next higher capacity shall be provided by the contractor without any extra cost.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type 5700 K with high pressure die cast aluminium hosing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection . 4KV in-built and 10 KV external surge protection with top opening driver cover for easy maintenance with efficacy not less than 120 lm/W heat resistant. The LED driver shall be of isolated type with Costant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED streetlight shall have power factor more than 0.95. The optical compartment shall be covered with heat resistant toughened glass for safety. The LED Street light should be top maintainable for easy maintenance LED street light shall be of Integral type complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, complete all as specified and directed by Engineer in charge. Make :- Bajaj Cat part No. ENXT P54L WH CR PC SD or equivalent all as approved by Engineer-in-Charge Note :- (i) Driver and luminaire of LED fitting shall be of same manufacturer (ii) All T&P ie ladder, Tools, Safety glooves etc will be provided by the contractor without any extra cost to height upto 25 mtr. (iii) If same capacity is not available next higher capacity shall be provided by the contractor without any extra cost.

S&F of Double wall corrugated high density polymer ethyl pipe of size 40mm outer dia with ISI marked (is 14930-2001), laid in trenches/floors & fixed on wall/pole with & including necessary fitting such as bends, sockets & other connected accessories etc for laying of electric cables, complete all as specified and directed by Engineer in charge.

Taking out unserviceable and S&F MCCB 3 pole 100 amps breaking capacity 25 Ka, 415 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc, complete all as specified and directed by Engineer in charge.

Taking out unserviceable and S&F MCCB 3 pole 63 amps breaking capacity 16 Ka, 415 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc, complete all as specified and directed by Engineer in charge.

Taking out unserviceable and S&F under water proof LED lights lumiplus V1 PAR 56 LED 20 watt, complete all as specified and directed by Engineer in charge.

M&L for cutting of road/ hard standing up to a size exceeding 0.45 cm width and not exceeding 90cm in depth for laying of pipe lines/ cable protection pipe including making good the disturbed road/hard standing/path etc with same specification to match the existing surface level, complete all as specified and directed by Engineer in charge.

Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with length of bricks perpendicular to the direction of cable, adjacent/abutting each other, complete all as specified and directed by Engineer in charge.

M&L for preparation of old steel surfaces and applying two coat of synthetic enamel white paint to steel tubular pole height 11 mtr from ground level alternative in and 1 mtr height from ground level yellow and black strips of 30 CM height each including numbering of Pole No with black paint, complete all as specified and directed by Engineer in charge.

S&F in replacement of nylon brushes with all enclosure/accessories, of size 80cm x 7 cm of reputed brand suitable for suction sweepers of existing type & model, complete all as specified and directed by Engineer in charge.

M&L of GI water tubing of size 25 mm bore medium grade ISI marked with all required fittings such as bends elbows, tees short pieces, connector check nuts & threading fixed complete to walls and ceilings or laid in floors/ trenches including taking up or down existing steel tubing and connections, complete all as specified and directed by Engineer in charge.

S&F in repair of Gun metal gate valves, cast copper alloy, butterfly handle, screwed both ends with iron pipe of size 25 mm dia/bore valve, complete all as specified and directed by Engineer in charge.

S&F in replacement 80 mm bore Air release valve cast iron body, as per existing model/ type, conforming to relevant IS marked with rubber gaskets, MS nuts, bolts, washers, etc., as required and testing complete including taking down the existing unserviceable foot valve of any description, complete all as specified and directed by Engineer in charge.

Supply installation ,connecting commissioning and testing in replacement of chemical dosing pump, Single Phase, 230 volts with pressure 04KG (m2) and discharge 6 LPH, complete all as specified and directed by Engineer in charge.

M&L for construction of PCC Solid block valve chamber of size 1200x1200x1100 (Internal dimension), PCC 1:4:8 type D2 (using 40mm graded stone aggregate) for foundation, brick wall with sub class `B’ bricks built in CM 1:6 PCC 1:2:4 type B1 (using 20mm graded stone aggregate) for coping rendering in CM (1:4) 15mm thick including provision of MS sheet cover 2mm thick fixed to MS angle frame made out of 40x40x4mm thick with 2 coats of synthetic enamel paint over one coat of red oxide primer to steel surfaces and locking arrangements including dismantling old one with necessary excavation and earth work in any type of soil, complete all as specified and directed by Engineer in charge.

Taking out of M&L for opening filter media and scrapping internal surfaces, cleaning and washing thoroughly, scrapping existing paint and spraying one coat of synthetic enamel paint on outer surface after cleaning. Supply and Laying of new complete filter set as per existing size & model at site, complete all as specified and directed by Engineer in charge. Note: Contractor is advised to visit the site before quoting the rate. Location : swimming Pool.

S&F in repair of CI body Sluice valve PN 1.6 conforming to IS of size 80 dia complete with nuts,bolts,rubber gaskets etc including ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 80 mm, complete all as specified and directed by Engineer in charge.

Please Enable Macros to View BoQ information