Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.5 Cr
EMD Value
₹9.0 L
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tenzin Yuton
POWERGRID Comprehensive Scheme, Project Manager Office, Itanagar (Arunachal Pradesh)
Slope Protection works at 33/11 kV Lumla Sub-Station (Tawang) under Comprehensive Scheme, Arunachal Pradesh using Gabion Facia.
5002002281/OTHERS/DOM/H03 - GUWAHATI
Open
Civil Works - Others
Works
Tawang, Arunachal Pradesh
₹12,500
₹9.0 L
19 Nov 2022
9 May 2022
9 Jun 2022
9 May 2022
6 Jun 2022
9 May 2022
19 May 2022
Supply and installation of three dimensional erosion control mat made of polypropylene polymer of minimum mass per unit area 450 gm / sq.m extruded on to a mechanically woven double twisted hexagonal shaped steel wire mesh (as per EN 10223-3) made up of 2.7mm dia having a combined mass per unit area of the composite more than 2000 gm/sqm. Steel wire and mesh type 8 x 10 having Zn-Al 5% coating as per EN 10244-2 longitudinally weaved with steel cable of 8 mm diameter at a spacing of 0.3m, including fixing of U pins of 8mm diameter of typical depth 500mm at 1m c/c spacing, lacing required to connect the nets and all accessories, including safety, all other ancillary works, material machinery, labour, etc. complete with all leads and lifts and as directed by Engineer - In - Charge.
Supply and installation of Self Drilling Anchors (32mm dia., yield load>400kN) with attached sacrificial drill bit, nut, washer plate 200 x 200 x 10 mmm size, coupler for connecting bars, with suitable corrosion protection coating for bar and accessories and full length grouting with admixture including all ancillary works for soil nailing/top/bottom/surface anchoring including all ancillary material, machinery, Labour etc. as per detailed technical specifications and as per Engineer - In - Charge.
Supply and installation of Self Drilling Anchors (38mm dia., yield load>480kN) with attached sacrificial drill bit, nut, washer plate 200 x 200 x 10 mmm size, coupler for connecting bars, with suitable corrosion protection coating for bar and accessories and full length grouting with admixture including all ancillary works for soil nailing/top/bottom/surface anchoring including all ancillary material, machinery, Labour etc. as per detailed technical specifications and as per Engineer - In - Charge.
Supply and application of High Performance-Flexible Growth Medium (HPFGM) which is 100% biodegradable, composed of 100% recycled, thermally refined (within a pressurized vessel) virgin wood fibers, crimped interlocking biodegradable fibers, mineral activators, and wetting agents (including highviscosity colloidal polysaccharides, crosslinked biopolymers and water absorbents) along with STANDARD prescriptive agronomic formulations such as fertilizer, extended-term dyes, soil pH modifiers, bio stimulant materials and seeds which is hydraulically-applied for Erosion control and faster growth of Vegetation. Supply and application of Biotic Soil Media (BSM) - a combination of recycled Thermally Refined bark and wood fibers with a proprietary blend of biopolymers, biochar, seaweed extract, humic acid, endomycorrhizae and other beneficial constituents. All components of the Biotic Soil Media blend shall be of naturally derived and renewable, and engineered to optimize moisture retention, growth and establishment of vegetation. BSM is applied hydraulically over soil substrate to add organic matter so as to enrich soil nutrients prior to application of HP-FGM or other hydraulic erosion control mulch layers. as per BSM specifications along with standard prescriptive agronomic formulations such as fertilizer, extendedterm dyes, soil pH modifiers, bio stimulant materials, seeds etc as specified.
Providing & Backfilling behind gabion units with available backfill material including all leads and lifts, including segregation, complete as per drawing and technical specification (Reference to MoRT&H's specification Clause 3100 and IRC:78 caluse 710.1.4) & 2200.
Supply and installation of Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes of 1 m height as per IS: 16014:2018, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), (Zinc+Polymer) coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with stones, as per directions of engineer- in- charge.
Providing, cutting to required size and fabrication of “H Type” frame using ISA 60 x 60 x 6, ISMC 100 and placing the same behind Gabion units as required including all material, labor, machinery etc. complete as per detailed technical specifications and as directed by engineer-in charge.
Supply and filling of PCC (1:2:4) fill below the reinforced soil strata using M15 grade concrete as per detailed technical specifications and as directed by Engineer-In charge.
Manual Scaling of loose rock including stacking of boulder at bottom of slope and disposal at dumping place within 1 km from the site as directed, including all material, labour, machinery, etc.as per detailled specfications and as directed by Engineer-In-charge.
Removal of vegetation, bushes, shrubs in lower and upper section including stacking of useful material, disposing of material from hill slope with all leads and lifts as directed by Engineer -In -Charge.
Slope Protection works at 33/11 kV Lumla Sub-Station (Tawang) under Comprehensive Scheme, Arunachal Pradesh using Gabion Facia.
5002002281/OTHERS/DOM/H03 - GUWAHATI (Rfx: 5002002281)
General guidelines for filling up the Attachments
Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.
Sole Bidder
JV (Joint Venture)
Sole Bidder
Ram Lal
Attachment-9(JV)
& Ram Lal
Ram Lal
Sole Bidder
Designation :
ATTACHMENT-3 (QR)
Individual firm
Attached copies of original documents defining :
The constitution or legal status;
The principal place of business;
The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).
Attached original & copies of the following documents :
Written power of attorney of the signatory of the Bid to commit the bidder.
Whether bidder anticipate any change in legal structure/ ownership of their organisation at present. If Yes, please enclose details of same and copy of procedural document(s) with reference to the same/ as required statutorily, as of now
Particulars
The bidder should have successfully executed similar works (i.e. work Slope Protection & RCC Concrete Work including associated works) for Govt. or Semi Govt. or reputed private Sector Organization within the last 7 years from the originally scheduled date of bid opening i.e. 02.06.2022. (i) One Single Contract of value not less that INR 42.599 Million (80% of the estimated value of the package Incl. GST). or (ii) Two Contracts each of value not less than INR 26.62 Million (50% of the estimated value of the package Incl. GST). or (iii) Three Contracts each of value not less than INR 21.299 Million (40% of the estimated value of the package Incl. GST).
Scope of work executed under the above contract (Tick only whichever is/are applicable)
Capacity of the system
Value of work Rs. in crore
Minimum Average Annual Turnover @ (MAAT) for best three financial years out of last Five financial years of the bidder shall not be less than INR 67.69 Million.
Turnover details:
Details of documentary evidence submitted in support of Qualification Data
Financial year
Years preceding to the bid opening
Designation :
Attachment-4
Equipments & Materials produced in [Name of countries]
[Name of Countries]
Designation :
country.
Attachment-4(A)
For Equipment
Designation :
Attachment-4(B)
Designation :
Attachment-5
Item Description
Nationality
Item Description
Address
Designation :
Annexure I to Attachment-5
Item Description
Nationality
Designation :
Annexure I to Attachment-5
Item Description
Nationality
Designation :
Attachment-5A
Item Description
Category (Micro or Small)
Item Description
Address
Designation :
Attachment-5A
Item Description
Category (Micro or Small)
Designation :
Attachment-6
Reference clause in the Specifications
Designation :
Annexure I toAttachment-6
Reference clause in the Specifications
Designation :
Attachment-7
Designation :
Attachment-9
Description of Work
150 (One Hundred and Fifty) days
Designation :
Attachment-10
Designation :
Attachment-11
Name of the person with designation in POWERGRID
Designation :
Attachment-11
Ram Lal
Nitivihar, Itanagar-791111
Name of the person with designation in POWERGRID
Designation :
Attachment-11
Power Grid Corporation of India Ltd.,
Comprehensive Scheme Office,
Name of the person with designation in POWERGRID
Designation :
ATTACHMENT-12
Name of Materials/Labour
Supply and Placement of Reinforcement Steel:
A- WPI-HSD
B-WPI-Baic Metals
LabourL=
Concreting
A- WPI-HSD
B-WPI-Cement,Lime and Plaster
LabourL=
Designation :
Attachment-13
Designation :
Attachment-14
Designation :
The requisite format of Integrity Pact is getting generated automatically and displayed here below.
Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
For further details bidders may please refer ITB Clause 9.3 (o).
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 1 of 8
POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :
No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.
POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.
POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.
If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.
The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles during his participation in the tender process and during the contract execution :
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 2 of 8
The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.
The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.
The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.
The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.
The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.
The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.
The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 3 of 8
If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.
If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.
If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.
If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.
If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.
The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 4 of 8
If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.
POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.
POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.
The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 5 of 8
The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.
The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.
POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.
As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.
The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.
If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 6 of 8
The word ‘IEM’ would include both singular and plural.
This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.
This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.
Changes and supplements as well as termination notices need to be made in writing.
If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.
Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.
CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 7 of 8
Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
Signature
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
(Office Seal)
Designation :
Witness 1 :
Designation :
Witness 2 :
Designation :
Page 8 of 8
Attachment-15
We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
Name of the Supplier/ Contractor in whose favour payment is to be made
Address with PIN Code and State
Status – Company/others
Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment.
If 3(b) is ‘Yes’ please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs
Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment order 2018 including subsequent amendment/notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached.
Permanent Account (PAN) No.
GSTIN Numbers
GSTIN in the Sates/UT from where the supply of goods take place
GSTIN number
GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)
GSTIN number
Saving Account
Designation :
Attachment-16
Details of Banker:
As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Letter Ref.
Name of client, cause of litigation/arbitration and matter in dispute
Name of client
Value of outstanding work (Rs.)
Actual (Previous five years)
Designation :
Attachment-17
Designation :
Attachment-17
Nitivihar, Itanagar-791111
Name of the person with designation in POWERGRID
Designation :
Attachment-17
Power Grid Corporation of India Ltd.,
Comprehensive Scheme Office,
Name of the person with designation in POWERGRID
Designation :
Attachment-18
Designation :
The requisite format of Safety Pact is getting generated automatically and displayed here below.
Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other six pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
All the pages of both the copies of the Safety Pact shall be signed by the authorised representative of the bidder and duly stamped.
Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
For further details bidders may please refer ITB Clause 9.3 (s).
having its Registered Office at
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 1 of 6
POWERGRID recognizes and accepts its statutory responsibilities for ensuring construction, operation and maintenance of equipments and for the provision of safe methods of work and safe working conditions.
POWERGRID recognizes and accepts its statutory responsibilities for ensuring safety of not only its employees but also that of the Contracting Agencies as Principal Employer.
POWERGRID shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction as well as Operation & Maintenance of the Transmission Assets.
POWERGRID shall conduct necessary awareness and training programmes to its Employees to augment the various safety requirements to be followed during Construction and Operation & Maintenance of the Transmission Assets from time to time.
POWERGRID shall, from time to time, issue necessary guidelines,instructions and deterrents to its employees as well as to the Contracting Agencies, to update them to take necessary preventive measures to avoid repetition of similar accident attributes.
POWERGRID shall review and provide necessary guidanceto the Contracting Agencies, as and when, any abnormality / special situations are brought to its notice by the Contracting Agencies during execution of the Transmission Projects being executed by them.
POWERGRID shall conduct periodical surveillance site inspections / audits to identify the unsafe conditions and unsafe actions, and bring them to the knowledge of the Contracting Agencies for taking timely corrective actions.
POWERGRIDshall investigate all accidents, fatal as well as non-fatal, to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents, and fix responsibility for the lapses leading to the accident.
POWERGRID shall augment the training to the workers and supervising personnel of the Contracting Agencies, as per schedules, upon nomination by the Contracting Agencies in reasonable time frame.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 2 of 6
POWERGRID shall exercise the right to claim and recover compensation from the Contracting Agencies in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the applicable Laws and contractual specifications / guidelines in vogue / issued by POWERGRID from time to time.
The Bidder / Contractor recognizes and acceptsthe statutory and comprehensive responsibility for ensuring safe construction and Testing & Commissioning in the Transmission Projects being executed by thembyproviding safe methods of work, working conditions and Tools & Plants for human safety.
The Bidder / Contractor recognizes and accepts the responsibilities for ensuring safety of not only their employees but also that of the Sub-contractors, Principal Employer and the general public during execution of the Transmission Projects / works.
The Bidder / Contractor shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction of the Transmission Assets.
The Bidder / Contractor shall endeavour continuous development of safe methods of work to ensure that the effect of risks and perils are minimised to the extent possible and implement the same at their worksites.
The Bidder / Contractor shall conduct periodical Training to their Employees as well as to that of theirSub-contractors for safety awareness during construction works being executed by them.
The Bidder / Contractor shall provide all requisite Tools & Plants required for the work and ensure their healthiness by periodical inspections / testing as required. Unhealthy and sub-standard Tools & Plants will be immediately removed from site as and when they are identified.
The Bidder / Contractor shall,at their cost, provide all necessary Personal Protective Equipments such as Double Lanyard Safety Belts, Appropriate Fall Arrest Systems, Safety Helmets, Foot Wear, Hand Gloves, etc., as required for various activities pertaining to execution of the Projects / works, confirming to relevant Indian Standards.
The Bidder / Contractor shall ensure that dedicated qualified Safety Officers are posted in the construction projects being executed by them and ensure that the Safety Officer visits each and every gang periodically and conducts audits / inspections to identify the unsafe conditions and unsafe actions, to be rectified by the site supervising personnel promptly.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 3 of 6
The Bidder / Contractor shall conduct appropriate medical checks-up for the workers before deploying them at their construction sites to ensure that only those who are medically fit are deployed in the Projects / works to be executed by them. The copy of the Medical Reports shall be provided by the Bidder / Contractor to POWERGRID, whenever requested by POWERGRID.
The Bidder / Contractor shall screen the workers before deploying them at their construction sites to ensure that only those with the skills, experience and competence to work at heightand also medically fitfor work at height are deployed for work at height in the Projects executed by them.
The Bidder / Contractor shall ensure daily before starting the work thattheir site Supervising Personnel / Safety Officer briefs the workers about the work for the day and the safety measures / precautions required to be taken by them.
The Bidder / Contractor shall investigate all the accidents at their working sites to ascertain the lapses leading to the incident and the precautionary / corrective measures required to be taken to avoid recurrence of such accidents. These accidents will be reviewed at the Board Management level of the Agencies and the findings / recommendations will be put up to POWERGRID Apex Safety Board within the stipulated period.
The Bidder / Contractor shall ensure that all accidents, whether fatal or non-fatal in nature, will be informed to POWERGRID, in writing, immediately on the occurrence of the same,and in any case, within not more than 24 hours of occurrence of the same.
The Bidder / Contractor shall ensure that in case of any accident, all necessary medical help / supportshall be provided to the victims / injured till they are completely fit to return to work.
The Bidder / Contractorshall ensure that in case of fatal accidents, all statutory Authorities, including Police, concerned Labour Dept. Officials, concerned Workmen Compensation Commissioner, etc., will be intimated in writing as required by the statutory Law, and followed up for compliance of all statutory obligations. The Bidder / Contractor shall own full responsibility of timely accident reporting to various authorities, including POWERGRID.
The Bidder / Contractor shall ensure that in case of fatality or serious injury leading to permanent disablement of the victims, the compensation amount will be deposited with the concerned authorities, as required by the Laws, and followed up for early disbursement to the beneficiaries of the victims.
The Bidder / Contractor assures that they shall co-operate to the fullest extent for carrying out any investigation of the accidents at their work sites by POWERGRID to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents. All factual details of the occurrence of the accident will be provided to POWERGRID, as and when required.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 4 of 6
The Bidder / Contractor assures that they take full responsibility of meeting the statutory obligations in case of accidents, and in case of any reference by any Statutory Body at a later date also, they shall provide all information to POWERGRID and meet all the statutory obligations, including payment of additional compensation, if any.
The Bidder / Contractor assures that in case of any inspection of their work site or Notice by any Statutory Authority, they shall comply promptly and inform POWERGRID Site Officials of the same, and also provide all necessary information and assistance for smooth compliance of the observations / instructions of such Authorities.
The Bidder / Contractor accepts the provisions regarding safety, including payment of compensation to POWERGRID, in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the Contractual Conditions, Safety Planand the Safety Pact, and confirm to abide by the same.
POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
POWERGRID will disqualify, from the tender process, any bidder/ take punitive actions on the bidder, who does not sign this Pact or violate its provisions.
This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under the Safety Pact.
Changes and supplements need to be made in writing, which shall come into force only upon mutual agreement / acceptance.
If the Contractor is a partnership firm or consortium of Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venue partners, as applicable as per the Tender Specifications.
Nothing in this agreement shall affect the rights of the parties available under General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
Should one or several provisions of this agreement turn out to be invalid, the reminder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
(Signature)
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Page 5 of 6
Signature
(For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
(Office Seal)
Designation :
Witness 1 :
Designation :
Witness 2 :
Designation :
Page 6 of 6
Attachment-19
Designation :
Bid Form 1st Envelope
Slope Protection works at 33/11 kV Lumla Sub-Station (Tawang) under Comprehensive Scheme, Arunachal Pradesh using Gabion Facia.
Enter details here.
...[Enter the Amendment]…
Bank Draft
Enter details here.
Please note that if bid amount is less than Rs. 9,03,000/-and if bid validity is less than 06 (six) months, your bid may be rejected
A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14.
The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents [Attachment – 3(QR)].
The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B.
The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item.
Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises.
The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein.
The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. (Not Applicable)
Manufacturer’s Authorisation Forms.
Work Completion Schedule.
Guarantee Declaration.
Information regarding ex-employees of Employer in our firm.
Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.
Declaration regarding Social Accountability.
Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.
Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise
Additional Information.
Declaration for tax exemptions, reductions, allowances or benefits
Safety Pact
Declaration.
Declaration of Key Managerial Person jointly with Power of Attorney holder
Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order, if applicable
Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, and MoP Order, if applicable
Declaration by the bidder regarding events encountered pursuant to ITB Clause 2.1
GCC 38 as modified in SCC
Appendix 2 to Form of Contract Agreement
Designation :
Printed Name :
Designation :
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
01-Section - I IFB SSTE Vol-I.docx
docx • 0.04 MB
02 Section - II ITB SSTE civil(Feb 2019).docx
docx • 0.09 MB
03-Section - III_BDS.docx
docx • 0.05 MB
04-Annexure-A(BDS)-QR.docx
docx • 0.03 MB
04-Annexure-A(BDS)-QR.pdf
pdf • 0.85 MB
04-Annexure-B (BDS).docx
docx • 0.02 MB
04-Annexure-C(BDS)_Vol-I.docx
docx • 0.03 MB
05-GCC-civil works(Feb 2019).doc
doc • 0.37 MB
06-Section - V_SCC.doc
doc • 0.15 MB
07-Appendix -I to SCC.doc
doc • 0.17 MB
09-Section - VI Forms and Proceedures Vol-I.doc
doc • 0.39 MB
Annexure-D (BDS).docx
docx • 0.02 MB
Thumbs.db
db • 0.02 MB
~$ Section - II ITB SSTE civil(Feb 2019) - Copy.docx
docx • 0.00 MB
~$ Section - II ITB SSTE civil(Feb 2019).docx
docx • 0.00 MB
~$-GCC-civil works(Feb 2019).doc
doc • 0.00 MB
~$-Section - I IFB SSTE Vol-I.docx
docx • 0.00 MB
~$-Section - III_BDS.docx
docx • 0.00 MB
~$-Section - VI Forms and Proceedures Vol-I.doc
doc • 0.00 MB
~$-Section - V_SCC.doc
doc • 0.00 MB
~$nexure-D (BDS).docx
docx • 0.00 MB
~WRL0893.tmp
tmp • 0.05 MB
~WRL1726.tmp
tmp • 0.04 MB
~WRL2984.tmp
tmp • 0.10 MB
~WRL3586.tmp
tmp • 0.05 MB
BOQ for Refernece only.xlsx
xlsx • 0.02 MB
Section-I General Information and Scope of Work.doc
doc • 0.10 MB
Section-II Technical Specifications & Drawings.docx
docx • 1.48 MB
Section-III Field Quality Plan.pdf
pdf • 0.95 MB
Section-IV Special Terms & Conditions.docx
docx • 0.02 MB
01_1st Envelope-attachment.xlsm
xlsm • 1.24 MB
02-Attachment-14-IP.doc
doc • 0.07 MB
03-Attachment-18-SAFETY PACT.docx
docx • 0.03 MB
04-Attachment-21- Affidavit for Self Certifictaion.docx
docx • 0.02 MB
05-Attachment-22- Certificate by Auditor.docx
docx • 0.02 MB
06-Attachment -24_Declaration regarding events encountered.docx
docx • 0.03 MB
07-Attachment-23-Compliance to the process related to the e-RA.docx
docx • 0.02 MB
08-Legends.pdf
pdf • 0.03 MB
Thumbs_1.db
db • 0.02 MB
~$01_1st Envelope-attachment.xlsm
xlsm • 0.00 MB
annulment_of_bidding.pdf
pdf • 0.35 MB
Corrigendum-I-OBD_Extension.pdf
pdf • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .