82506 SPECIAL REPAIRS TO OFFICERS MARRIED ACCOMMODATION AT KALPAKKAM UNDER AGE (I) NAVY CHENNAI

Amount

Demolition cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thick (below & above ground level) complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:2:4 type B-1(using 20mm graded stone aggregate) 40 mm thick as in flooring and finishing surfaces even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying epoxy treatment for sunken floor/RCC roof over 15mm thick rendering on fair faces of brick work of concrete surfaces with cement plaster 1:3 with WPC @ 2% by weight of cement complete all as specified and directed by Engineer-in-Charge. (Note: Water proofing compound will be measured and paid separately)

Material and labour for PCC 1:5:10 type, E-2 (using 40mm graded aggregate) as in mass concrete as in sunken floor complete all as specified and directed by Engineer-in-Charge.

Material and labour for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) levelling course complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance not exceeding 2 km out side the base at the disposal of the contractor complete all as specified and directed by Engineer-in-Charge.

Material and labour for screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Vitrified ceramic tiles 10 mm thick light shade (Square/rectangular) polished area of each tile not exceeding 0. 36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed plaster on fair faces of brick work/concrete in CM 1:3, complete all as specified and directed by Engineer-in-Charge.

All as per item No.11 here in before but in skirting's complete all as specified and directed by Engineer-in-Charge.

Demolition of padding concrete in roofs, any thickness, existing roof treatment of any description in any condition including removing top surface and removing all the debris complete all as specified and directed by Engineer-in-Charge.

Dismantling roof treatment on vertical surfaces in roofs, parapet walls of any thickness, existing roof treatment of any description in any condition including removing top surface and removing all the debris complete all as specified and directed by Engineer-in-Charge.

Removing of debris any description obtained from demolition beyond the lead included in the rates including loading unloading to a distance exceeding 1.5KM and not exceeding 2.00 KM out side defence land complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in padding concrete to maintain required slope including coving to junctions of parapet and roofs complete all as specified and directed by Engineer-in-Charge.

Material and labour for cement concrete tiles 250 x 250 x 22mm thick machine pressed, set jointed and pointed in neat cement slurry in floors with grey cement and no pigments over a coat of 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Second class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

Material and labour 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part1), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodized grill, 10 mm rod/plate, square, rectangular, circular or similar type of shape, aperture as approved, fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No. 8778), aluminium frame with grill shall be powder coated not less than 50 micron all as specified and as directed. Make: DECOGRILLE Grill type DG 916 or equivalent as mentioned in PS

Supply and Fix sheet glass ordinary quality 5.5mm thick, in squares exceeding 0.5 sqm each pane complete all as specified and directed by Engineer-in-Charge.

Supply and Fix sheet glass ordinary quality 5.5mm thick, in squares not exceeding 0.5 sqm each pane complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Aluminium alloy wire cloth, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 100mm hinges extruded aluminium alloy with galvanised mild steel pin anodized and fixed type C-21 complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 150mm size aluminium handle, cast type, anodised complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 150mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new or previously untreated wooden surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted wooden surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying a coat of Synthetic Enamel paint complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed by Engineer-in-Charge.

Material and labour Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing complete all as specified and directed by Engineer-in-Charge.

Supply and Fix wardrobe hooks (single ) 50 mm to 60mm complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 150 mm door stopper of aluminium alloy body, with rubber bush complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plates complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squatting pan including connection to trap and flushing pipe, anti syphonic pipe etc complete incl making good to floor complete all as specified and directed by Engineer-in-Charge..

Supply and Fix in repairs Vitreous china wash down water closet pan (pedestal pattern ), white (excluding fixing bolts, flushing cistern and flush pipe) but including seat cover and connection to drain or outgoing pipe and to flush pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair vitreous china, wash hand basin white flat back size 550 x 400mm white complete waste, chain and pug and porcelain stopper including bracket complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap complete all as specified and directed by Engineer-in-Charge.

Supply only pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.

Supply only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix Brass CP mixer 15mm bore dia of pipe for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6Kgf/cm2 fixed compete to in walls, floors, ceilings etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

Supply and Fix PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement. complete all as specified and directed by Engineer-in-Charge.

Supply and Fix sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m complete all as specified and directed by Engineer-in-Charge.

Supply and Fix soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair aluminium anodised tubular rail 20mm dia D type 60cm long between flanges including per pair brackets for each towel rail complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair aluminium hat pegs solid body 125mm to 175mm long complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair bib taps of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs 15mm bore concealed stop valves cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair Brass chromium plated shower rose 125mm size, with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

Supply and Fix kitchen plate rack made of stainless steel 1mm thick including bedding in cement mortar on to wall or including fixing cantilever brackets size 910 x 790 x 255 mm complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 mixed with water proofing @ 2% by weight of cement finished surfaces fair and even (Note:- WPC will be measured separately). complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing New plastered surfaces and applying two coats of distemper oil emulsion over coat of primer and putty on surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old plastered surfaces and applying one coats of distemper oil emulsion on surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Material and labour preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour applying two coat of cement based paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface, complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment and prepare the surface by chalk whiting to receive the distemper and applying two coats distemper oil emulsion on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 20mm dia bore and connection including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 25mm dia bore and connection including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 40mm dia bore and connection including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 40 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge.

Material and labour for Cutting chases, pinning in , for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3, not exceeding 10 cm girth complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Brass Elbow (3/4" X ½") for 20mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Brass Elbow for 25 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Brass Elbow for 40 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Brass Tee for 20 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Brass Tee for 25 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Brass Tee for 40 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Male Brass Threaded Adaptor (MTA/ MBTA) for 40 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Female Brass Threaded Adaptor (FTA/ FBTA) for 40 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Union for 25 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Ball valve of 40mm dia complete all as specified and directed by Engineer-in-Charge.

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 75mm dia bore PVC (SWR) branch piece, single (Single 'Y') equal or unequal complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 110mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 75mm dia bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 110mm dia bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for 110mm dia bore PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge..

Supply and Fix for 75mm dia bore PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge..

Material and labour treating the soil under plinth protection at the rate of 5.0 ltr of emulsion per sqm of surface area complete all as specified and directed by Engineer-in-Charge.

Material and labour treating the soil along with external perimeter of building at the rate of 2.25 ltr of emulsion per mtr of the perimeter walls complete all as specified and directed by Engineer-in-Charge.

Providing ATT by injecting at point of contact of wood work by chemical emulsion (oil or kerosene based solution)@ 0.5 lit/ hole by drilling 6mm dia holes at downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and directed by Engineer-in-Charge.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm part including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or any thickness in floors, skirting's, risers etc laid ,bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Mild Steel Gate and shutter, hooks and eyes 100 mm complete all as specified and directed by Engineer-in-Charge.

Material and labour for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm cement screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for cup boards stutters made with 19 mm thick prelaminated particle board with decorative lamination on one side and other side balancing white lamination medium density, exterior grade, including 6 mm teak wood lipping complete all as specified and directed by Engineer-in-Charge.

Supply and Fix for ball catches of 8mm dia steel brass body and striking plates of approved pattern fixing to the cupboard shutters, including lettering complete all as specified and directed by Engineer-in-Charge.

Supply and Fix continuous (piano) hinges mild steel bright finish or electro galvanised 30mm width of flaps complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Hasp and staple 100mm long aluminium anodised incl bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Steel rolling shutters of 1.00 mm thickness laths without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push & pull or manual type complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Preparation old previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel Paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, window cills and other similar situations complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Gun metal 40 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick cement plaster in 1:3 using WPC @ 2% by weight of cement finished surfaces even and smooth using extra cement (Water proofing compound including) complete all as specified and directed by Engineer-in-Charge.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and as directed complete all as specified and directed by Engineer-in-Charge.

Material and labour hard-core of gauge exc 63mm deposited, spread & levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick Cement concrete type C2, 1:2:4(using 20 mm graded stone aggregate) in sub base of flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Demolition of brick tiles or terracing tiles, single layer on slant roofs complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10mm thick cement screed in cement mortar 1:3 with water proofing compound at the rate of 2% by weight of cement to have a smooth surface in slant roofs.(WPC will be measured separately) complete all as specified and directed by Engineer-in-Charge.

Material and labour for Hydraulically pressed burnt clay tiles plain of size 200 x 200 x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n.exc 2 Sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour for 25 mm thick flush shutters, solid core construction with block board and plywood face panel, commercial type on both side complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs 18/19 mm thick block boards interior grade commercial quality as in cup board shelves complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and Fix magic eye15mm dia steel body suitable for 35 to 40 mm doors with all necessary fittings complete all as specified and directed by Engineer-in-Charge.

Supply and Fix mild steel lock, of 7 levers with self locking and night latch of size 100 mm complete all as specified and directed by Engineer-in-Charge. Make:- Godrej or equivalent as approved by AGE(I)

Supply and Fix Stainless Steel double layer shelf with towel rod, multipurpose wall mounted bath shelf organizer, kitchen shelf/bathroom shelf and rack/bathroom accessories complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Harrison rail of 25 mm dia aluminium powder coated complete all as specified and directed by Engineer-in-Charge.

Supply and Fix 25 mm of Stainless Steel Glossy Matte Series Curtain Bracket complete all as specified and directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc.

Taking down old/existing MCB DB SPN/ TPN with MCB's complete by disconnecting complete all as specified and directed.

Taking down old sub main wiring with 2runs/4runs of 4/6/10 sqmm aluminium/copper cables including making good disturbed surface all as specified and directed.

Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia, concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately all as specified and directed for :-

One light point controlled by one switch

One Ceiling fan/Exhaust fan point controlled by one regulator / switch.

One 3 pin socket outlet 5 amps on independent board

One 3 pin socket outlet 5 amps on same board

All as per item No 145.04 here in before but 3 pin socket outlet 15 amps sockets on independent board with 4sqmm multistranded copper PVC insulated cable.

One bell/buzzer point controlled by one push button

One light point controlled by two Nos of two way switches.

Supply and Fix switch modular 10 amps one way flush type 1 module complete all as specified and as directed.

Supply and Fix switch modular 10 amps Two way flush type 1 module complete all as specified and as directed..

Supply and Fix switch modular 10 amps bell push flush type 1 module complete all as specified and as directed..

Supply and Fix switch modular 16 amps one way flush type 1 module complete all as specified and as directed..

Supply and Fix socket modular 2/3 pin 10 amps flush type 2 module complete all as specified and as directed.

Supply and Fix socket modular 2/3 pin 25 amps flush type 2 module complete all as specified and as directed.

Supply and Fix only electronic modular fan regulator 120w step type 2 modular complete all as specified and as directed.

Supply and Fix modular white cover plate with frame 1 module complete all as specified and as directed.

Supply and Fix modular white cover plate with frame 2 module complete all as specified and as directed.

Supply and Fix modular white cover plate with frame 3 module complete all as specified and as directed.

Supply and Fix modular white cover plate with frame 4 module complete all as specified and as directed.

Supply and Fix modular white cover plate with frame 6 module complete all as specified and as directed.

Supply and Fix modular white cover plate with frame 8 module complete all as specified and as directed.

Supply and Fix Modular Metal flush box 1/2 Module complete all as specified and as directed.

Supply and Fix of Modular Metal flush box 3 Module complete all as specified and as directed.

Supply and Fix of Modular Metal flush box 4 Module complete all as specified and as directed.

Supply and Fix of Modular Metal flush box 6/8 Module complete all as specified and as directed.

Material and labour for circuit wiring/sub main wiring with two run single core 4sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25mm dia/PVC casing capping 25mm including conduit accessories complete all as specified and as directed. Note : Three runs of 4 sqmm cable and one run of 25 mm conduit/casing capping will be measured as one unit length.

Material and labour for circuit wiring/sub main wiring with two run single core 16 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 16 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25mm dia/PVC casing capping 25mm including conduit accessories complete all as specified and as directed. Note : Three runs of 16 sqmm cable and one run of 25 mm conduit/casing capping will be measured as one unit length.

Supply and Fix ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed.

Supply and Fix Bell, AC,230 Volts, single pole, Multi music type complete all as specified and as directed.

Supply and fixing of single pole and neutral enclose with a two pin and earth plug and socket complete with one single pole MCB 240V, 20Amp complete all as specified and as directed.

Material and labour for telephone sockets Modular type complete all as specified and as directed.

Material and labour for TV sockets Modular flush type complete all as specified and as directed.

Material and labour for PVC conduit 20 mm dia (For TV and data cable) complete all as specified and as directed.

Material and labour for Junction box(1 to 4 way) for TV/Tele wiring complete all as specified and as directed.

Supply and Fix Double Door Vertical TPN Distribution Box 4 way complete in SS enclosure with 200 amps rated busbar complete all as specified and as directed.

Supply and Fix MCCB 415 Volts, 16 KA breaking capacity, 100 Amp, 4 pole complete all as specified and directed by Engineer in Charge.

Supply and Fix RCBO Four Pole 100mA, 440 volts 63 Amps with Front face indication for earth leakage fault IP 20 protected terminals 35 Sq mm terminals sliding shutters complete all as specified and as directed by Engr-in-charge. Make:- Legrand Cat Part No 4113 35. or equivalent as mentioned in PS

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN/FP 40 to 100 AMP current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and fixing amp rating 240V, 10KA 'C' curve MCB SP 6 - 40 Amps with 10KA breaking capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and Fix LED light fitting 4 feet,1x20w trendy wall mounted batten, with extruded aluminium housing, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-charge.. Make: C&S Electric Cat Part NoLTTB4F20WLED/W or equivalent as mentioned in PS

Supply and Fix LED light fitting 4 feet,1x20w trendy wall mounted batten, with extruded aluminium housing, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-charge.. Make: C&S Electric Cat Part NoLTTB4F20WLED/W or equivalent as mentioned in PS

Supply and Fix Energy saving new generation 10W LED IP65 bulkhead luminaries with opal diffuser /10W complete all as specified and as directed by Engr-in-charge. Make: C&S Cat Part No. LTB10WLED or equivalent as mentioned in PS

Supply and fix angle type lamp holder PVC /Polycarbonate type with LED bulb 9 Watt complete all as specified and directed by Engineer in Charge

Supply and fixing of single pole and neutral encloser with a two pin and earth plug and socket complete with one single pole MCB 240V, 20Amps complete all as specified and as directed by Engr-in-Charge.

Cutting the existing wall for fixing colour for exhaust fan and making good disturbed surfaces inner and outer of wall complete all as specified and as directed by Engr-in-Charge.

Supply and fix exhaust fan, made of sturdy Engineering plastic body complete with louvers shutter, voltage AC single Phase. 230V, 50 Hz of size 300m sweep with, RPM 1200, copper winding, complete all as specified and as directed by Engr-in-Charge

Material and Labour for providing earthing complete with copper plate size 600 mm x 600 mm x3.15mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level ,Alternate layers of charcoal) & common salt Crystal and connected to copper earth strip 20x3mm by means of bolts, nuts, check nuts & washers of copper and connecting to earth dolly all as shown in electrical plate No. 3of SSR Part I of 2009 & testing complete including 40mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box, including 20 mm bore water pipe medium grade GI Tubing including GI Funnel , wire mesh etc. NOTE :- Earth continuity conductor and GI protection pipe beyond 7.5m shall be measured and paid under the respective items complete all as directed by Engineer- in charge.

Material and Labour for earth continuity conductor or copper strip 20x3 mm buried in ground / fixed on wall / drawn in 40mm dia light grade GI pipe, complete all as directed and specified by Engr in Charge.

Supply and Fix frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm center to center with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lip of 10.5 mm fixed to the intermediate channel at 457 mm center to center complete all as per manufacturer's instructions and as directed by Engineer-in Charge.

S & F Hangers 6mm dia G>I (Upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 12 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Philips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of ceiling for applying two coats of distemper oil-emulsion over 2mm putty complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Demolition cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thick (below & above ground level) complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Cement concrete designer(chequred) tiles of size as directed by Engr-in-charge,20-25mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed 20mm thick CM 1:6 etc complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 3core 10Sqmm complete all as specified and directed.

Supply and fixing Metal Box size 200 X140 X95 mm internal size with hinged door(L) with 1 No PVC connector 4 way 16 Amps and 1 Nos MCB SP 6 Amps including fixing bracket, Nut, Bolts etc complete Make : Sintex Cat part No GSJB2014 or Equivalent as per PS.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m depth for foundations or laying under ground cable, pipes etc. and getting out in soft/loose soil etc. complete all as specified and directed by Engr-in-charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

Supply and fixing High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sqm/ m of size 40 mm for cable protection laid in trenches complete all as specified and directed

Supply and Laid in trenches/wall GI pipe Light grade 40mm dia as for Road Crossing of Cable/PTL fittings complete all as specified and directed.

Supply and Fix Garden Light , IP 65 , 8W with decorative post 0.6m height complete all as specified and directed. Make: Havells Model No.CONEBLS8WLED857PSYMTOPC (0.6 M) or equivalent as mentioned in PS

Supply and installation of panel sheet metal box size 0.3 x 0.25 x 0.10m for existing Energy meter indoor type dust and vermin proof fabricated out of CRCA sheet not less than 3.15 mm thick fixed on angle iron frame of size 50x50x6mm duly powder coated complete all as specified and directed by Engr-in-Charge.

Supply and fixing post top lantern LED type 40 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.

Material and labour for pre-cast cement concrete block masonry with solid blocks, exceeding 10 cm in width and setting in mortar, complete Type B1 1:2:4 using 20mm aggregate complete all as specified and as directed

S Dilli

kvs constructions