Special repairs to DSC guard post (Salvage Sub Depot) at Mil Stn Suranussi under AGE (I) Suranussi

Amount

Demolition of brick work built in cement mortar , including all quoins arces etc

Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level.

Dismantling wall and Ceiling boards any thickness, including cover fillets complete all as specified and as directed

Dismantling, mild steel work of any description not otherwise provided for

Dismantling Framed work timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site.

All as per above but area exc 1.50 Sqm but n.exc 4.00 Sqm

M&L for brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius with old size bricks complete all as specified

Ditto all as per item 9 above but Except bricks only

M&L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L for 15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L preparing surfaces new of walls and applying two coats oil bound distemper over a coat of primer complete all as specified.

M&L preparing surfaces new of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for Providing, cement concrete type 1:2:4, as in roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates, etc

Dismantling floor, hearth or wall tilling incl cement mortar bedding (but not backing), remvoving serviceable tiles to store and rubbis off the premises complete all as specified and directed.

M&L 20-25 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:4 complete all as specified.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over 20 mm th screed or bedding layer in CM 1:4 complete all as specified.

M&L for glazed ceramic tiles coloured of size 450mmx350mmx7mm thick on vertical surfaces suh as in skirting dado etc over 10mm thick backing coat in CM 1:4 complete all as specified.

M&L 25mm th cement conc type B-0, 1:2:4 using 12.5 mm graded stone agg as in levelling course.

M&L for Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 75 mm th cement conc type C-2,1:3:6 as in plinth protection with using 40 mm graded stone aggregate

M&L 12mm thick perforated particle board/tiles for insulation and acoustic purposes, 60X60cm in size, fixed in frame work/grid complete all as specified and directed..

M&L 605X605mm size Anodised aluminum snap grid frame work for false ceiling complete all as specified and directed.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165)

M&L for 35 mm thick IInd class HW , factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F for 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified

S&F for Framed work as Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. also fastening conforming to GdeFe 290(Gde E-165)

S&F solid PVC door frame of sie 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings.

Supply & Fixing for steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf. (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note :- Wire gauge shall be measured and paid for separately.

Ditto all as per item No 31 above but with Gauged shutter

S&F 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0 .5sqm in each pane

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm

S&F in repair 300 mm long ordinary helical door spring , fixed to doors with screws

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts.

S & F mild steel pressed handle oval type stove enameled black of size 150mm.

S & F mild steel butt hinges cold rolled of size 100mm medium weight.

M&L Preparing surfaces new of steel and applying two coats of SE paint over a coat of red oxide prmer, complete all as specified and as directed.

M&L preparing surfaces new of wood and applying two coats of SE paint over a coat of pink primer complete all as specified.

S&F 20 mm dia harrison rails mild steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM)

Dismantling water tanks and removing to store Exc 250 & n exc 500 ltrs, complete all as specified and as directed.

S&F Rotational moulded polythene water storage tanks, double layer (cylinders each vertical with closed top) of capacity 500 ltrs, hoisted and fixed in position incl pvc float valve 20mm size specified in SSR Pt-1 Make : Sintex/Frontier/Polycon

Taking down GI tubing and connections with all fittings 15 mm bore

Ditto all as per item 46 above but 20mm bore

S&F 15mm dia GI tubing and connections fixed to wall or ceiling laid in floor etc

S&F 20mm dia GI tubing and connectionf ixed to wal or ceiling laid in floor etc

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.

S&F in repair 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by engineer-in-charge.

S&F in repair 15mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by engineer-in-charge.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified

M&L preparing surfaces of old walls and applying one coats oil bound distemper.

M&L for preparation of old plastered surfaces of any description not otherwise described and applying two coats of cement base painting camouflaging pattern over a coat of primer on walls including preparation and cleaning the old surface etc complete all as specified and directed

S&F in repairs Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) white with grating and union for discharge pipe complete all as specified and directed.

S& F in repair vitrious china wash hand basin flat back 550X400mm incl fixing bracket, (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand etc all as specified and directed by engineer-in-charge.

S &F 32 mm bore High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm etc all as specified and directed by engineer-in-charge.

S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified

S&F in repair PVC SWR pipe 110 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F in repair PVC SWR pipe 75 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F in repairs 100 dia PTMT grating doom (min wt 25 gms) complete all as specified

S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed

S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge.

M&L 100 mm thick cement conc type PCC 1:4:8 type D-2 using 40MM graded stone aggregate as in sub floors/Sub base

M&L for 200X200X 25mm th chequered cement concrete tiles coloured with grey cement and pigment as in floor etc over 20mm th screed bed in CM 1:6

M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates as in, copings, finishing side to path, including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge .

Dismantling of asbestos cement (Corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with J type hooks as specified.

S & F pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with J type hooks as specified.

Taking down carefully surface aluminium or copper point wiring on TW Batten/in conduit/ with PVC casing-caping/conduit (light, fan, socket, or power) complete and making good the disturbed surface of wall/celling etc including taking down fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and removing material from site aii as specified.complete.

M&L for point wiring for light/fan/bell point with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick( Make - Hylem/Anchor) ISI Marked, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for:- Make of wire :- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga

All as per item No.2 above but for 3 pin socket outlet 5 amp controlled by one switch on the same board with other switches aii as specified and directed.

All as per item No.2 above but for 3 pin socket outlet 5 amp controlled by one switch on the independent board with other switches aii as specified and directed.

S&F Switch piano, flush type, single pole, one way, 5 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

Supply and fixing LED Street light fitting 60 Watt 230 AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.all as specified and as directed.

Supply and fixing of LED lights fitting 1 x 20 W, 220 V AC decorative box type with driver, holder including LED tube rod light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complect as specified. Make :- Havells/ Crompton / Bajaj

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as speciied and directed by Engr-in-Charge. Make :- Havells/Anchor/Legrand

S&F ceiling fan regulator electronic flush , steped type (four step) 230 Volts AC complete all as speciied and directed by Engr-in-Charge. Make:- Havells/Anchor/Legrand

S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) complete, all as specified and directed. Make:- Havells/Bajaj/Crompton.

Supply and fix Exhaust Fans AC single phase 230/240 volts of size 300 mm sweep metal body with louver shutter including making holes for fixing of fan and making good the distrubed surface connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. Make:- Havells model ventil air DB or equivalent model Bajaj/ Usha

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 4 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make:- Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S & F of MCB SPN, 240 volt, 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge.

S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge.

Supply and fixing angular lamp holder insulated body with back plate including LED lamp 7 Watt suitable for pendent fittings complete complete all as specified and directed. Make :- Havells and equivelent.

S&F sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLSH) copper conductor cable of size 2.5 Sqmm LT, 1100 volts grade, drawn through and including 20 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 2.5 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.

Earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on complection., earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate with 1 nos MS handles of 8mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified.

Excavation in trenches in Soft/disntegrated not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of GI pipe etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in Soft/loose of soil complete all as specified & directed by Engr-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/loose soil, all as specified & directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point soft /loose soil all as directed by Engr-in-Charge.

Material and labour for Sand filling under floors in foundations including watering and consolidation.aii as specified and directed.

Supply and fix common burnt clay building brick Sub class B designation 75 all as specified and directed.

Supply ,laying and testing cable XLPE insulated ,screened ,PVC bedded ,galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 16 sq mm 2 core .

S&F,25 mm bore GI tubing "light garde "in treches on pole for protection of cables complete all as specified & directed by Enginner-in Charge .

DUGGAL CONSTRUCTION CO

AAY KAY Constructions

SUNRISE CONSTRUCTION COMPANY