Partition in Civil Store Hall for electrical store and renovation of existing toilet of main store in Engineering cell, MDU, Rohtak

Amount

Dismantling brick work, tile masonry or tile lining and tile terracing. In cement

Dismantling concrete cement concrete plain 1:2:4

Removing door and windows (wood and steel ) with chowkats by making recesses in walls when the wall is not to be dismantlled. Doors

First class brick work laid in cement sand mortar 1:5 in upto 4 meters above plinth level

Providing and laying autoclaved aerated (cellular) concrete light weight blocks (As per IS:2185, Part3) masonary in non load bearing walls using block size 625mmX250mmX100mm with cement sand mortar 1:6 in superstructure complete in all respect.

Pressed steel sheet frames (chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hings, confirming to PWD specifications, including bolts for fixing stops, locknutch, provision for receiving towe

Supplying and fixing glass panes including special metal sash putty of approved make glass panes 4mm thick, exceeding 40 sq dm areas

Wrought iron and mild steel ( using angles, flats, square bars, tee and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost

Providing and fixing hard drawn steel wire fabre 75mm x 25mm rectangular mesh with 3.25mm dia wire fixed on steel windows of standard rolled sections with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws welded complete in all

11.43 cm. thick brick wall laid in cement sand mortar 1:4 in super structure.

12 mm thick cement plaster 1:4

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall

Factory manufactures panelled door or glazed window, shutters of commercial hard wood, such as hillock, champ, chikrassy and chaplash etc. (non coniferous timber other teak, conforming to IS specification No. 1003, kiln seasoned) with 100mm wide vertical

Cost of aluminum fittings complete for doors and windows, such as tower bolts, handles, etc. and screws for these fittings (exluding sliding bolt) for double leaf shutter

Providing and fixing sliding bolt with nuts and screws, etc. complete iron size 300 mm X16 mm

Providing and fixing anti skid tile 400 x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shad

Providind and fixing 1st quailty ceramic glazed wall tiles confirming to I.S 15622 (thick ness to be specified by the manufactureer) of appreved make in all colors shades except burgundy, bottle green, black of any size as approved by Engineer-InCharge

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacuterer over the plastered wall surfaced to prepare the surface even and smooth complete.

Distempering with washable oil bound distemper (of approved manufacture ) two coat on old distempered work

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping, etc. Painting two coats excluding priming coat with synthetic enamel paint in all shade on new wood work or metallicor plastered or concr

Providing & fixing in position best Indian make (Ordinary ) lavatory suites in vitreous chinaware , R.S. or C.I. Brackets C.P. brass screw down pillar tap with, all fittings best Indian make and complete including making good the walls, floors and paintin

Providing and fixing in position 15 mm i/d C.P. brass bib cocks of best quality as required by the Engineer-in-Charge) Bib cock long body

Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-charge) 15 mm stop cock Stop cock male and female

Providing and fixing lead inlet connection with brass union for finishoing and warning pipes complete in all respect . (c) 15 mm alkathene pipe inlet connections.

Removing of rolling shutter having 5 ft width and shifting from site to main store ground complete in all respect to the entire satisfaction of Engineer-in-Charge.

Providing and fixing european water closet suite (EWC) Cera make including seat cover with C.P Jet and 10 ltr. Capacity PVC cistern twin type Hindware/Cera make complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing C.P jali 4'' dia complete to the entire satisfaction of the Engineer-in-charge.