Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 6 VISHNU SHREYA COMPLEX PLOT NO 87 87 A SECTOR 50 E OFF PALM BEACH ROAD SEAWOODS NERUL WEST NAVI MUMBAI 400706 | THANE | MAHARASHTRA | 400706 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance ROOM NO 305 3RD FLOOR R B T SOCIETY MANKHURD W MUMBAI 400043 | MUMBAI | MUMBAI | MAHARASHTRA | 400043 | Admitted-Finance |
| 5 | Admitted-Finance 102 R RESIDENCY PLOT 39 SEC 19 BEHIND HOTEL MALWAN ULWE NODE NAVI MUMBAI | NAVI MUMBAI | MAHARASHTRA | Admitted-Finance |
Tender Value
₹54 L
EMD Value
₹1.1 L
Closing Date
26 Jul 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Director ACTREC
Engineering Services, ACTREC
Renovation of entrance of CRI building at ACTREC
2022_TMC_700039_1
Renovation of entrance of CRI building at ACTREC
Open Tender
Civil Works
Item Rate
150 days
actrec kharghar
As per tender terms and conditions
2 documents required · 2 mandatory
₹0
₹1.1 L
Yes
Engineering Services
28 Nov 2022
11 Jul 2022
27 Jul 2022
11 Jul 2022
26 Jul 2022
11 Jul 2022
11 Jul 2022 - 18 Jul 2022
19 Jul 2022
Amount
Providing and laying machine cut, mirror polished Italian Marble and Indian marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Providing and laying autoclaved aerated cement blocks masonry with 50-100 mm thick AAC blocks at all levels in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) in fine sand
Providing and laying machine cut, mirror polished Onyx stone in required design (Simple geometrical, abstract etc.) and in patterns in linear portions of the building as a wall cladding, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the Onyx stone shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Provision to be made behind Onyx stone for fixing of backlight with ready maintainence area.(rate for Blue colour can be adopted). Italian marble border to be provided separately.
Providing and laying machine cut, mirror polished Engineered/Composite Marble in required design (Simple geometrical, abstract etc.) and in patterns in combination with different colours, shades and finished surface texture etc., giving a seamless finish, all complete as per the architectural drawings, with 18-20 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with type - 2 Adhesive as per IS 15477-2004, including pointing and grouting as per the technical specification in the tender. etc. all complete as specified and as directed by the Engineer-in-Charge. Seamless finish to be obtained as per the guidelines given in the tender specification.
Dismantling stone slab flooring and reception tables laid in cement mortar including stacking of serviceable material and disposal of unserviceable material outside the ACTREC campus as per the instruction of Engineer incharge.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling of all types including electrical fixtures in false ceiling and disposal of unserviceable material outside the ACTREC campus and stacking of serviceable material as directed by Engineer-in-charge.
Providing and laying in position Plain cement concrete of specified grade excluding the cost of centering and shuttering: 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Dismantling and removal of wooden wall cladding including all insulating material and hollow boxes and disposal of unserviceable material outside the ACTREC campus and stacking of serviceable material as directed by Engineer-in-charge.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Supply and Fixing of Slim window of 12mm thick Toughened Glass with designer etching as approved by Architect using sleek anodised alumnium section (anodising of approved colour) with complete glass of maximum dimension 3m or as per drawing. The Fixed glass to be fixed using approved Profiles of aluminium at Top & Bottom & at sides (the profile to shared for approval). The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. The profiles shall be suitable for Glass thickness of 12 mm.The Profile shall be 20 micron matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness including 20 Micron of Anodizing of approved colour. All complete as per the instructions of Engineer incharge.
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. - 18 mm thick Italian Marble stone slab as approved by Engineer incharge. Column portion shall be of different colour with cement mortar of 50mm thick (1:3) ratio mixed with suitable binding material.
Supply and Fixing of Slim Aluminum partition of 8-12mm thick Toughened Glass with designer etching as approved by Architect using sleek anodised alumnium section (anodising of approved colour) with complete glass of maximum dimension 3m or as per drawing. The Fixed glass to be fixed using approved Profiles of aluminium at Top & Bottom & at sides (the profile to shared for approval). The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. The profiles shall be suitable for Glass thickness of 12 mm.The Profile shall be 20 micron matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness including 20 Micron of Anodizing of approved colour. All complete as per the instructions of Engineer incharge.
Supply and Fixing of Slim openable Aluminum door of 8-12mm thick Toughened Glass with designer etching including providing and fixing top & bottom pivot & floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle size 600mm Center to Center, lock and stopper etc. included in the item rate). as approved by Architect using sleek anodised alumnium section (anodising of approved colour) with complete glass of maximum dimension 3m or as per drawing. The Fixed glass to be fixed using approved Profiles of aluminium at Top & Bottom & at sides (the profile to shared for approval). The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. The Profile shall be 20 micron matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness including 20 Micron of Anodizing of approved colour. All complete as per the instructions of Engineer incharge.
Providing and fixing wooden partition/Panelling and framework for column to be made by 2" X 1 1/2" thick wood section with both side 12mm thick ply. The one side surface area shall be measured for payment.
Providing and fixing 12mm. thick Dupont corian of approved shade for reception tables, column, cabinet etc. to be fixed over existing ply. Dupont to be fixed with adhesive, silicon tape etc. complete with cutting as required etc. Complete in all respect.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, Shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to all/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge with 12.5 mm thick tapered edge gypsum moisture resistant board and making provision for fixing of electrical fixtures.Work includes cutting and bending in curved shapes with cove and step design with all necessary cutouts.The ceiling is to be finished with a top coat as per approved manufacturer. The item also includes painting the ceiling with plastic emulsion paint in 2 or more coats after preparing the base.
Half height partition :WOODEN PARTITION: Providing and erecting partitions to required ht. With teakwood frame of 50mmx50mm in 500-600mm square panel or as required at site. The wooden panneling shall be done with 12mm thick commercial plywood of approved make and quality on both sides of partition with 12mm groove. The teak wood 30mmx12mm beeding on both sides to the required shape skirting at bottom on both the sides to required shape and skirting at bottom on both sides with 125mm x 12mm teak wood and top patti with 125 x 20mm T.W.to required flap/or as filler between the wall/ceiling/flooring and partition. Melamine polish wherever required shall be applied. Both side 1mm thk sunmica of approved colour and design as per the instruction of engineer-in charge.
Wooden Coffered false ceiling fixing with sturdy teak wood frame work, installation of 6mm thick marine plywood with melamine finish alongwith putty, wood filler, stain etc complete for installation of coffered beam cladding with designer woodwork as approved by the Engineer incharge. Maximum upto 600mm wall shall also be covered with wall cladding. The design and drawing shall be approved by architect and engineer incharge prior to the installation. One side covered area shall be measured for payment.
Side Storage -Providing and fixing side storage unit to be made out of 19/12mm thk BWP (IS710) marine ply cladded with 1mm thk Laminate finished from inside and outside. Italian marble of approved shade shall be placed on the top. Complete with All necessary hardware & Fixture. Note : All Furniture to Be Made Out of Calibrated plywood (IS : 710) BWP All Internal & External Surfaces of Plywood Finished with Laminate and veneer . All Hardware Complete as per detailed Drawing & Instructions directed by Engineer in charge. SIZE: 2500 x 450 x 750mm. Only one side front elevation of storage shall be taken for payment.
Center table as per the design and drawing given by architect/Engineer incharge. 12mm thick marine plywood top with both side 1mm thick laminates of approved colour. Supporting members shall be MS with red oxide coat and powder coating of approved colour.
Custom seating sofas - Curved as per the design given by Architect/Engineer incharge. Cushioned seat and back shall be provided. The sofas shall be adquately supported with set-up as per the drawings. Colour combination and design shall be approved by Engineer incharge before procurement of item.
Wooden book shelf - as per the design provided by architect/ Engineer incharge. One side Front elevation measurement shall be considered for payment. 19mm marine plywood to be used for all sides and 1.5mm thick laminate to be provided on all the sides as per the instruction of Engineer incharge.
Revolving type chair with wheels : SEAT ASSEMBLY :- The Cushioned seat is made of Injection moulded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression * Seat Size : 47.0 cm (W) x 48.0 cm (D) BACK ASSEMBLY :- The Cushioned back is made of PU Foam with insitu moulded MS moulded E.R.W.Round Tube of size 1.9 ± 0.03 Cm x 0.16 ± 0.0128cm. It upholstered with leatherette. *MID BACK SIZE :- 47.7 cm (W) x 60.1 cm (D) ARMRESTS :- The armrest top is moulded from Polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of Ø 3.81 ± 0.03 cm x 0.2 ± 0.01cm thk M.S.E.R.W tube having chrome plated finish . The armrest height adjustable up to 6.5 ± 0.5cm in 5 steps. SEAT DEPTH ADJUSTMENT :- Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0 ± 0.5 cm . ADJUSTABLE BACK SUPPORT :- Back frame is connected to the Up/ Dn mechanism housed in plastic T Spine .It can be adjusted in the range of 7.42 ± 0.5 cm for the comfortable back support to suit individual need . ACTIVE BIO -SYNCHRO MECHANISM :- The adjustable tilting mechanism is designed with the following features : - • 360 ° revolving type . ADJUSTMENT :- The pneumatic height. adjustment has an adjustment stroke of 10.0 ± 0.3 cm .
Reception Table - Providing & Supplying at site Custom made reception table in 19mm marine ply construction inclusive of support framing,table,counter top & drawer box with key board tray as per architect drawing & design. Rate to include 19mm thick Italian marble counter top & Edging 62 x 19mm inclusive of edge polishing & finishing. Facia to be finish with 12mm thick corian with polishing & Buffing, Edge Binding with 12mm corian. Concealed LED lighting strips with drivers to be installed in pelmet ( LED Strip is 19mm x 12mm with polycarbonate cover. All other surfaces internal & External to be finish with veneer inclusive of teak wood edge lipping of 10mm thickness. Provision for necessary wire management as directed (Without electrical). Complete with All necessary hardware & Fixture. Note : All Furniture to Be Made Out of Calibrated plywood (IS : 710) BWP , All Internal & External Surfaces of Plywood Finished with Laminate . All Hardware Complete, as per detailed Drawing & Instructions directed by Engineer in charge. Including loading, unloading,transportation,etc. complete. SIZE: 5000 x 750 x 1050mm ht. ACTREC logo to be installed of SS fitting.
Removing / relocating of existing electrical fixtures and fittings alongwith wiring, switch sockets, fire alarm , acces control etc. all complete and disposal of unserviceable material outside the ACTREC campus and stacking of serviceable material as directed by Engineer-in-charge.
SITC of Size 1200 mm BLDC remote operated , decorative type sweep ceiling fan including all fixing accessories like hooks , rods etc.
SITC of 15 A,5 pin, switch socket combination board concealed modular type as per site requirements.
Supply & laying of CAT 6 cable through casing-capping, PVC conduit including termination accessories , 10 Nos IO box modular type concealed all as directed by O-I-C, ES. PVC conduit pipe and casing capping included
Providing & installation of analogue telephone instrument , with modular type telephone 02 Nos conceled type socket , jack and connecting wire
Primary Point wiring for light / fan/ exhaust fan with 1.5 sq mm FRLS 1100 V grade PVC insulated copper wire in casing capping/ PVC rigid 25 mm conduit with modular switch socket , plate , fan dimmer accessories , suitable GI Box , ceiling rose & appropriate size of insulted copper wire for earthing. Material are included - modular switch socket , fan dimmer ,modular accessories with concealed PVC boxes face plates , 1.5sqmm size wires , PVC conduit , casing capping and wiring from PVC modular board to lights , fans. etc.
Secondary Point wiring for lights ( 1st light to 2nd light ) with ISI mark 1.5 sq mm 1100 V grade PVC insulated copper wire in casing capping/ PVC rigid 25 mm conduit of (min 25 mm) with ISI mark switch/bell push of 5 Amps flush type erected on best quality modular PVC switch socket fan dimmer accessories , ceiling rose & appropriate size of insulted copper wire for earthing. Material are included - switch socket fan dimmer modular accessories with surface PVC boards , 1.5sqmm size wires , PVC conduit , casing capping and wiring from 1st point to 2nd point
Supply , laying and termination of 1core X 2.5 sq. mm flexible copper wire FR PVC in casing capping , PVC conduit pipe For wiring from DB to power points., Air conditioners.
Supply and Fixing of PVC conduit/ Truncking 25mm size of PVC rigid conduit with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.
Supply & laying of 25mm dia PVC flexible conduit conforming to ISI standards with required number of coupling, PVC bushes, check nuts etc
Supply & Fixing of casing capping of 1.25inch with screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.
SITC of 3 x 1.5 sq. mm copper flexible cable including end to end termination with all fixing accessories.
Supply and fixing of 18W recessed mounted LED lighting fixture round , decorative type
Supply and fixing of 18W surface mounted LED lighting fixture , round decorative type
Supply and fixing of 32A MCB DP + Neutral with enclosure box
Supply , laying and termination of 1core X 4 sq. mm flexible copper wire FRLS PVC in casing capping , PVC conduit pipe For wiring from DB to power points., Air conditioners.
Supply and fixing of 3W LED decorative Spot light led for fixing in ceiling concealed type
Supply and fixing of 5W LED strip light as directed by EIC
Supply and fixing of Back light LED ( strip type ) for Onyxstone 2mt x 2.5 mtr area cover complete illumination
Supply and fixing of Digital clock for 300mm x 300mm size 1ph , 230volt operated
Supply and fixing of decorative type 3way modular boxes with accessories faceplate etc
Supply and fixing of decorative type 4 way modular boxes with accessories faceplate etc
Supply and fixing of decorative type 12 way modular boxes with accessories faceplate etc
Supply and fixing of Modular switches 5A/15A
Supply and fixing of Modular soclets 5A/15A
Providing and fixing of morden LED pandent lights as directed by architect and EIC
KUMAWAT INFRASTRUCTURE
arcoma
RAJSHREE CONSTRUCTION CONSORTIUM
Vaishnavdevi Furnishers
Rama Infraprojects Pvt Ltd
OM NILKANTHA CONSTRUCTION
OM POWER SYSTEMS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .