Construction of Global Category Synthetic Hockey Surface including allied civil works with Annual Maintenance of 3 years for Turf and Sprinkler at Polo Ground Srinagar.

Amount

Sub Base of Synthetic Hockey Field Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller including making good the undulation etc. and disposal of surplus earth upto 50 metres

Disposal of surplus soil by mechanical means outside campus upto 2 Kms incl. the cost of loading unloading etc.

Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade

Supplying / Spreading and laying of (Grandular Sub-Base Course) filling at site incl consolidation with 8-10 capacity (Power Road Roller) and all leads, lifts, royalties and carriage complete.

Providing and laying wet mix macadam on prepared sub grade/sub base with crushed quarry stone aggregate of specified grading as per IRC/MOST specification including mixing crushed material with predetermined quantity of water in accordance with specification to form dense mass which is spread and rolled with vibratory roller 80/100KN capacity speed of which should not exceed 5KM/Hour for each layer, rolling should continue till 98% density is achieved to approved grade and X-section the mixing is to be prepared in approved mech, mixing plant of suitable capacity including laying of cold emulsion with pressure sprayer at the rate 0.75 kgs/sqm complete, including cost of all materials, all leads lifts octroi charge taxes etc.

Providing and applying tack coat using hot straight run bitumen of grade 80/ 100Including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc. and finally booming the surface as per specifications.On W.B.M.@ 0.75 Kg/sqm

Providing and laying 50mm. thick, dense bituminous concrete surfacing course using material aggregate satisfying the gradation set out in the specifications as per the MORTH with 6% binder content (By weight of total mix) with the aid of hot mix plant and paver finisher including rolling with road roller of 8-10 tonne capacity to achieve the required compaction and density. with bitumen of 80/100 grade. (including cost & carriage of tar & all royalities taxes etc. and allied materials involved complete.)

Providing and laying 25mm thick Semidense bituminous concrete using material aggregate satisfying the gradation set out in specification with 5% binder content (by weight of total mix) bitumen of grade 80/100 @2.88Kgs/sqm with the aid of hot mix plant and paver finisher including rolling with 8-10 tonne capacity to achieve the require compaction and density (with bitumen 80/100) including rolling with Power Road Roller to required gradient, finishing and carriage of all material involved, taxes, octroi etc.

Synthetic surface & Sprinkler system Supplying & laying FIH approved global category synthetic hockey turf and laying, jointing and fixing the same on the bituminous sub base with minimum15mm thick rubberrized under layer (shock pad) as per the FIH requirements and the pasting of grass as per the specification of global category FIH competition incl. all marking on the surface as per FIH rules and standard etc as per the instruction of engineer incharge incl all necessary specification/items involved in FIH approved Hockey Field

Supply and fixing almumnium goal post of FIH approved drawing and design incl. all fittings and net

Supply and installation of fully computerzied automatic and single key operation Gun Type sprinkler system specifically designed for syenthetic sports hockey surface of approved quality and make incl. all fittings and accessories incl. earth work in excavation and re-filling (earth work incl. 450mm of soil cover over the pipe and width of 300) HDPE pipe dia 150/110mm class per 100 grade 12.5g/cm2 incl. carriage of materials all complete

Supply and installation of 40HP coupled pumping set with electronic roater etc or equivalent, making connection suitable for TW/D C.B/ bore well tube well. The job incl screwing and welding of fluangs on G.I- B class pipes, jointing of electrical cable and other connections (Layout of same along with details project to be got approved Engineer) Incharge incl. carriages complete.

Construction/designing of RCC storage tank (Sumpwell) of 45000Ltrs capacity as per design including excavation of earthwork in all kinds of soil, disposal of excavated as directed by Engineer Incharge at Site incl. providing One maintenance hole with frame and cover of steel and steel ledder to be provided as per the drawings with all leads, lifts and carriage complete.

Construction of Pump House for Plinth Area Earthwork excavation by manual means in trenches in all kinds of soil for foundations incl. disposal of excavated earth beyond the site or as directed, disposed earth is to be levelled and neatly dressed incl. dewatering of trenches during execution if required.

Supply and laying of stone soling at site of required size hand packed incl. ramming with heavy hand rammer and all carriage complete job

Providing and laying in Position Cement Concrete of specified grade excl. the cost of cantering, shuttering in A) 1:4:8 with (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size crushed aggregate) incl. all carriage upto site of work.

B) 1:2:4 with (1 cement : 2 course sand : 4 graded stone agg. 20mm nominal size crushed aggregate) incl. all carriage upto site of work.

P/L in position specified grade of Reinforced cement concrete in 1:1.5:3 (1 cement : 1.5 Course Sand: 3 graded stone agg. ) 20mm nominal size aggregates excl. the cost of centering shuttering finishing , re-inforcement in beams, lintels, slab etc upto floor v-level incl. all leads, lifts and carriages complete.

Reinforcement for RCC work incl. straightening, cutting, placing in position and binding all complete.(TMT Bars) incl. all leads, lifts, carriages.

Providing and Laying of 50mm thick DPC in cement concrete in 1:2:4 with (1 cement : 2 course sand : 4 graded stone agg. 20mm nominal size crushed aggregate) incl. all carriage upto site of work.

Centering and shuttering incl. strutting, propping etc. and removal of form for: A) Foundation and Plinth

Lintels, beams

Suspended floors, landings

walls any thickness

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in 1:6 mix ( 1 cement : 6 course sand) incl. all leads lifts and carriages complete.

P/F Powder coated alumnium doors/window frames with shutters of required section incl. cost of ACP panels for door shutters and 5mm thick glass panes (Saint Gobin) with all necessary beadings, rubber gaskets and powder coated hardware fittings as required.

Providing and fixing 5 mm thick glass panes of standard make (saint gobain) plain shape to be fixed on aluminium frame work of required section around the building incl. all scaffolding charges upto desired height.

15mm thick cement plaster 1:4(1cement:4fine sand) complete

12mm th cement plaster to ceiling of mix 1:3 (1 cement 3 fine sand) complete

50mm thick cement concrete flooring in 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone crushed agg. 20mm nominal size) finished with a floating coat of neat cement slurry incl. all cost and complete

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete

P/F 50mmx50mm ornamental cornice of POP.

Distempering with oil bound washable distemper of approved brand and manufacturer to give an even shade incl. a coat of cement primer( two or more coats).

Finishing exterior walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade two or more coats @3.84kg/10sqm.

P/F of Ornamental Grill work using M.S. angles, flats, square bars etc incl a coat of steel primer complete.

Steel work in built up sections / framed work incl cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel, M.S. Tubes in trusses ,column etc.

P/F of color coated high rib GS sheet roofing (0.56mm thick) of approved quality color and design incl. verticle/curved surface fixed with self drillen dash fastners or polymer coated J or L hooks bolts and nuts 8mm dia with bitumen and GI limpet washers excl. the cost of purlins, rafters and trusses and incl. Cutting to size and shape wherever required complete.

Providing ridges (0.56mm thick)or hips 60cm overall width of colored GS sheets fixed with self drillen-fasteners or polymercoated j or l hook bolts nuts 8mm dia GI limpet and bitumen

Providing and fixing in position first class Budloo Eves boarding 300mmX40mm section incl. necessary framework of first class Budloo wood and a priming coat of approved quality.

Providing and fixing of First Class imported Wood panelling (T&G) on budloo wood frame work for soffits incl. all necessary nails, scaffolding and polishing complete.

Construction of Chain link fencing around Hockey field Earthwork excavation by manual means in trenches in all kinds of soil for foundations incl. disposal of excavated earth beyond the site or as directed, disposed earth is to be levelled and neatly dressed incl. dewatering of trenches during execution if required.

Supply and laying of stone soling at site of required size hand packed incl. ramming with heavy hand rammer and all carriage complete job

Providing and laying in Position Cement Concrete of specified grade excl. the cost of centering, shuttering in 1:4:8 with (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size crushed aggregate) incl. all carriage upto site of work.

Providing and laying in Position Cement Concrete of specified grade excl. the cost of centering, shuttering in 1:2:4 with (1 cement : 2 course sand : 4 graded stone agg. 20mm nominal size crushed aggregate) incl. all carriage upto site of work.

Centring and shuttering incl strutting propping etc and removal of form work for foundation footing bases of columns,

Steel work in built up sections / framed work incl cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel, M.S. Tubes in trusses ,column etc.

P/F of GI chain link fencing made of GI wire of 4mm dia of required mesh size 50 mm x 50mm incl straintning with 2mm dia wire or nuts, bolts & washers as required complete as per the directions of Engineer incharge.

15 mm cement plaster in 1:4mix ( 1 cement : 4 fine sand) with all leads, lifts and carriages etc complete job.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats incl a coat of steel priemer

construction of Drain Earthwork excavation by manual means in trenches in all kinds of soil for foundations incl. disposal of excavated earth beyond the site or as directed, disposed earth is to be levelled and neatly dressed incl. dewatering of trenches during execution if required.

Supply and laying of stone soling at site of required size hand packed incl. ramming with heavy hand rammer and all carriage complete job

Providing and laying in Position Cement Concrete of specified grade excl. the cost of centering, shuttering in 1:4:8 with (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size crushed aggregate) incl. all carriage upto site of work.

P/L in position specified grade of Reinforced cement concrete in 1:1.5:3 (1 cement : 1.5 Course Sand: 3 graded stone agg. ) 20mm nominal size aggregates excl. the cost of centering shuttering finishing , re-inforcement in beams, lintels, slab etc upto floor v-level incl. all leads, lifts and carriages complete.

Reinforcement for RCC works incld. straightening bending cutting placing in position and binding all complete (TMT Bars)

Centring and shuttering incl strutting propping etc and removal of form work for foundation footing bases of columns A) Foundation and footing bases of column

A) Walls any thickness

25mm thick cement concrete flooring in 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone crushed agg. 20mm nominal size) finished with a floating coat of neat cement slurry incl. all cost and complete

Making Drain holes in RCC slab by providing and embedding 40 mm dia and 75mm long app pieces of ordinary pvc pipe in RCC slab during casting of drain slab

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix ( 1cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design Inside size 90x80 em and 60 em deep including C.l. cover with frame (light duty) 455x61 0 mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

12 mm cement plaster in 1:4mix ( 1 cement : 4 fine sand) with all leads, lifts and carriages etc complete job.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

Curbing around Field Earthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5mtr in width and not exceeding 10 sqm on plan depth upto 1.5mtr including backfilling of soil & disposal of excavated soil to be leveled and neatly dressed within 25mts lead.

P/L stone soling dully hand packed incl ramming with heavy hand rammer all carriage upto site of work

Providing and laying in Position Cement Concrete of specified grade excl. the cost of centering, shuttering in 1:4:8 with (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size crushed aggregate) incl. all carriage upto site of work.

P/L in position specified grade of cement concrete in 1:1.5:3 (1 cement : 1.5 Course Sand: 3 graded stone agg. ) 20mm nominal size aggregates excl. the cost of centering shuttering finishing , in beams, lintels, slab etc upto floor v-level incl. all leads, lifts and carriages complete.

Centring and shuttering incl strutting propping etc and removal of form work for foundation footing bases of columns

Walkway/Path around Hockey field Earthwork excavation by manual means in trenches in all kinds of soil for foundations incl. disposal of excavated earth beyond the site or as directed, disposed earth is to be levelled and neatly dressed incl. dewatering of trenches during execution if required.

Supply and laying of stone soling at site of required size hand packed incl. ramming with heavy hand rammer and all carriage complete job

Providing and laying in Position Cement Concrete of specified grade excl. the cost of cantering, shuttering in A) 1:4:8 with (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size crushed aggregate) incl. all carriage upto site of work.

Providing and laying 60mm thick cement concrete interlocking paver block of M -20 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge incl. all leads, lifts and carriage complete. .

P/L in position cement concrete in 1:2:4 (1 cement : 2 Course Sand: 4 graded stone agg. ) 20 mm nominal size aggregates incl. the cost of centering shuttering finishing and carriages complete.

Construction of Mini Pavilion Earthwork excavation by manual means in trenches in all kinds of soil for foundations incl. disposal of excavated earth beyond the site or as directed, disposed earth is to be levelled and neatly dressed incl. dewatering of trenches during execution if required.

Supply and laying of stone soling at site of required size hand packed incl. ramming with heavy hand rammer and all carriage complete job

P/L in position cement concrete of specified grade in 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone crushed aggregate 40 mm nominal size) Incl. leads lifts and all carriages etc complete.

P/L in position cement concrete of specified grade 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone crushed aggregate 20 mm nominal size) Incl. leads lifts and all carriages etc complete.

Providing and Laying in position Reinforced Cement Concrete in 1:1.5:3 mix (1 cement: 1.5 coarse sand: 3 graded stone crushed agg. 20 mm nominal size)in foundations upto plinth level etc excluding cost of Reinforcement, centering and shuttering but incl all leads lifts and carriages etc complete at all levels.

Reinforcement for RCC work incl. straightening, cutting, placing in position and binding all complete.(TMT Bars) incl. all leads, lifts, carriages.

Providing and Laying of 50mm thick DPC in cement concrete in 1:2:4 with (1 cement : 2 course sand : 4 graded stone agg. 20mm nominal size crushed aggregate) incl. all carriage upto site of work.

Centering and shuttering incl. strutting, propping etc and removal of forms incl all consequential and incidental costs like leads, lifts, carriages and scaffolding etc complete job for: A) Footings, Bases of Columns etc

B) Walls (any thickness)

Lintels, beams, plinth beams, and cantilevers upto floor 2 level.

Supplying, Stacking and filling bolders/GSB under rooms incl. watering, ramming with hand rammer and leads, lifts and carriages complete.

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in superstructure above plinth level upto floor 2 level in 1:6 mix ( 1 cement : 6 course sand) mortar incld. all consequential and incidental costs like leads, lifts, carriages , scaffolding and curing etc complete job.

Providing and fixing extruded German profile U-PVC sliding Door system in white colour, frame 62+2mmx52+2mm with 1.25mm G.I U section reinforcement with rubber gasket of gray / black colour, including fixed fiber mesh jali (Whereever Required) of gray colour with jali frame section 30+2mm x50+2 mm, and fitted glass 5mm thick hermitically scaled unit . The doors will be having 50% area dedicated to fixed glass and 50% fixed with 12 mm thick laminated board pannels as per design and with 5mm glass pannels (whereever required )(with welded corners ) complete at site. The complete assembly will be having ten years warranty against weathering of profiles and one year warrenty on hardware fittings . (As per Sample)

Providing and fixing extruded German profile U-PVC sliding window system in white colour, frame 62+2mmx52+2mm with 1.25mm G.I U section reinforcement with rubber gasket of gray / black colour, including fixed fiber mesh jali of gray colour with jali frame section 30+2mm x50+2 mm, and fitted glass 5mm thick hermitically scaled unit . The windows will be having 50% area dedicated to fixed glass and 50% for sliding shutter with fiber mesh and frames the complete assembly will be having ten years warranty against weathering of profiles and one year warrenty on hardware fittings . (As per Sample)

15 mm cement plaster in 1:4mix ( 1 cement : 4 fine sand) with all leads, lifts and carriages etc complete job.

12 mm cement plaster in 1:4mix ( 1 cement : 4 fine sand) with all leads, lifts and carriages etc complete job.

50mm thick cement concrete flooring in 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone crushed agg. 20mm nominal size) finished with a floating coat of neat cement slurry incl. all cost and complete

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer (Birla White or equivalent) over the plastered wall / ceiling surface to prepare the surface even and smooth .

P/F 50mmx50mm ornamental cornice of POP.

Distempering with oil bound washable distemper of approved brand and manufacturer to give an even shade incl. a coat of cement primer( two or more coats).

Finishing exterior walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade two or more coats @3.84kg/10sqm.

P/F S1 clip-in-Hinge able false ceiling sysytem made out of galvanizes steel. The ceiling tiles shall be in size of 600x600x.05mm, Perforated to RG L08 pattern (0.8mm dia holes, 2.18% opening ) with non woven black tissue (Non flameable) laminated at the back to achieve the NRC not less than 0.6. Thes ceiling tiles shall be with beveled edges on 4 sides, All pannels are clipped into a secondary clip in profile U 1000 H made of galvanized steel 0.6mm length 4000mm & cross connected perpendicular to primary clip in carrier with U1001H forming the module of 600x600mm. The ceiling tiles are supported by galvanized suspension allowing the tiles to swing down providing maximum aaccessibilty to the ceiling and grid shall be suspended with M6 threaded rod and expansion bplts at 1200mm c.c. Finishes of ceiling to achivev the TAM 60 microns paint thickness as approved by the engineer in charge (make Durlum/Armstrong?Hunter Douglas)

P/F of imported wooden frame work for false ceiling partitions etc sawn and fixed in position with a frame 2x2feet of wooden rafter size 40mmx75mm

P/F of Ornamental Grill work using M.S. angles, flats, square bars etc incl a coat of steel primer complete.

P&F in position stainless steel, (grade 304) railing made of hollow tubes, channels, plates etc. incl. welding, grinding, buffing, polishing, making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete incl. fixing the railing with necessary accessories and stainless dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the sides of waist slab with suitable arrangement as per approval of engineer incharge incl. stainless steel ornamental King Post as per requirement.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,

Steel work in built up sections / framed work incl cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel, M.S. Tubes in trusses ,column etc.

P/F of color coated high rib GS sheet roofing (0.56mm thick) of approved quality color and design incl. verticle/curved surface fixed with self drillen dash fastners or polymer coated Jor L hooks bolts and nuts 8mm dia with bitumen and GI limpet washers excl. the cost of purlins, rafters and trusses and incl. Cutting to size and shape wherever required complete.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.

Providing and fixing in position first class Budloo Eves boarding 300mmX40mm section incl. necessary framework of first class Budloo wood and a priming coat of approved quality

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying vitrified floor tiles in sizes 60x60cm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

P/F ACP (aluminium composite panel) boxing on Exterior walls, soffitts etc. with PVDF coating and LDPE core laminated Eurabond /altobond /alubond exterior grade with 4mm thick with composite of (0.5mm-3mm-0.5mm) incl. fabrication for the same with alumnium section, required hardware, silicon sealant, masking tape, necessary scafolding etc. complete job.

Sanitary Fittings and Disposal System Providing PPR thermax concealed pipes with PPR fittings, clamps cutting chases and making good the wall. A) 15mm Dia

Providing PPR Pipes with PPR fittings incl. trenching and refilling complete. 20mm dia

P/F of PPR Thermax fittings of standard quality and make(c-grade) including jointing/ testing complete A) 20mm Dia Union

15mm Dia Union

25mm Dia Union

tank nipples 15mm dia

tank nipples 20mm dia

Socket 15mm

Socket 20mm

Socket 25mm

Elbow 15mm

Elbow 20mm

Elbow25mm

Tee 15mm

Tee 20mm

Tee 25mm

Providing and fixing of PPR gate value with C.I wheel of approved quality (ISI mark) 15mm bore

20mm bore

25mm bore

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl. jointing/testing complete A) 100mm Dia

75mm Dia

50mm Dia

Door Junction (100mm x100mmx75mm )

Door Bend (75mm x 75mm)

Floor Trap (100mm)

collar 100mm with rubber washer

collar 75mm with rubber washer

cowl 75mm size

Plain Bend 100mm

Plain Bend 75mm

Construction of brick masonary inspection Chamber (450x450)mm inside depth 600mm in brick work in cement mortar 1:4 mix, RCC top slab with 1:2:4 mix, foundation concrete in 1:4:8 mix, inside plastering 12mm thick in cement mortar 1:3 mix with floating coat of neat cement and making channels complete, including cost of manhole frame and Cover of required size of stanard quality and carriage of all materials involved complete.

P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc "B type" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest)

Providing and fixing white vitreous china wash basin size 630x 450 mm with pedestal of approved make with single hole 15mm C.P brass tap basin mixer (Jaquar/Parkoo or equivalent make), including painting of fittings and brackets, cutting and making good the wall.whenever required.(Hindware, Cera or Equivalent)

P/F of looking mirror of superior glass (of approved quality), rectangular size ( 450x350)mm with plastic moulded frame of approved make and shade with 6mm thick hard board backing.

Providing and fixing 600x120x5 mm glass shelf with edges round supported on anodised aluminium angle frame with C.P brass brackets and gaurd rail complete fixed with 40mm long screws, rawl plugs etc complete

P/F C.P brass fittings of standard quality and make (Jaquar or equivalent) A) CP Brass Bib Cock 15mm

CP Brass Bib Cock 15mm Long Nose

Pvc waste pipe for counter basin/ wash basin (32mm)

Floor Grating (100mm)

Towel Rail

Angle valve 15mm Nominal Bore concealed type Jaquar or Equivalent.

C.P. Brass Shower Rose with 15/12mm inlet

P/F of S.W Master Trap incl. C.I Cover with frame complete.

Providing and fixing in position polythylene septic tank type-B (Comfort or equivalent) having capacity for 20 users, 47"x51"x119" inches in size, including excavation of trench as per the size, providing and laying of 150mm thick bed concrete in 1:4:8 mix (1: cement :4 Course Sand : 8 graded stone agg. 20mm nominal size) filling the septic tank with fresh water, connecting the inlet and outlet with the septic lank and filling the dry course of sand and bajre arround the septic tank complete job including carriage of all materials involved.

P/F of electric gyser venus, Racold or equvalent make incl C.P. connections and all fixtures (50 ltrs capacity)

Earthwork in excavation by manual means for soakage pits, incl. disposal of excavated earth beyond the site, disposed earth is to be leveled and neatly dressed incl. dewatering of trenches during execution. (if required).

Dry random rubble masonry with hard stone in soakage pit using quarry stone with bond stones incl. carriage of stones.

Random rubble masonry with hard stone in soakage pit incl. levelling with cement concrete in 1:6:12mix (1Cement : 6 Coarse Sand : 12 Graded Stone agg. 20mm Nominal size) in (1:6mix (1Cement : 6 Coarse Sand)) including all leads lifts and carriages complete.

Providing and laying in position specified grade of reinforced cement concrete incl. the cost of centenng. shuttering, finishing but excl. the cost of reinforcement. All work upto plinth level in1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size)

Reinforcement for RCC work incl. straightening, cutting, placing in position and binding all complete.(TMT Bars) incl. all leads, lifts, carriages.

Electrification Part Supply/Laying of 25mm PVC conduit /channels dully laid or fitted with the help of rawplugs, saddles, for carrying of wire for electric wiring /circuit etc complete.

P/F of lighting points as well as lighting circiut incl. point wiring through conduits with 1.5 Sqmm Multi Standard copper wire of approved make for light, fan points etc complete in all respects.

P/F of heating points as well as heating circiut incl. point wiring through conduits with 4 Sqmm Multi Standard copper wire of approved make for heating points etc

Supply and fixing of 6Amp modular switches with pannel of standard quality of legrand, GM or eq. for lighting points/fan points. etc complete in all respect.

Supply and fixing of 6Amp modular 5 pin socket with pannel of standard quality of legrand, GM or eq. for lighting points/fan points. etc complete in all respect.

Supply and fixing of 16Amp modular switches with pannel of standard quality of legrand, GM or eq. for heating point, gyser point. etc complete in all respect.

Supply and fixing of 16Amp modular 5 pin socket with pannel of standard quality of legrand, GM or eq. for heating point, gyser point. etc complete in all respect.

Supply / Fixing of metal boxes recessed in wall for fiitng lighting switch pannel/heating switch pannel incl. resurfacing of wall with POP etc complete in all respect.

P/f of 900mm sweep ceiling fan of approved qulaity and make incl. cost of fan dimmer and M.S hooks (if required) complete (USHA, Havells or eq.make)

P/F of Exhaust Fan of approved quality (USHA, Havells or eq.make)

Supply/ installation/testing & commisioning of 40-63 Amp. TPN of legrand/indo asian/Havells or eq. make fitted in distribution boxes incl. making of necessary connections. etc complete.

Supply/ installation/testing & commisioning of 6-25 Amp. MCB's of legrand/indo asian/Havells or eq. make fitted in distribution boxes incl. making of necessary connections. etc complete.

Supply/ installation/testing & commisioning of 32-63 Amp. Double pole MCB's of legrand/indo asian/Havells or eq. make fitted in distribution boxes incl. making of necessary connections. etc complete.

Supply/fixing of 16 way distributor board double door of legrand,ssk or eq. make having lockable doors for MCB's, the distridution board are to be fixed /recessed in walls incl. resurfacing of walls with POP as per requirement etc. compleet in all respect.

P/F of Concealed LED lights(600x600mmsize) 36watt of Standard quality of approved make, phillips, syska or equivalent.

Supply/ Fixing electric service line with 7/16 insulated copper wire

Providing and installation of 1HP water pump (Monoblock) of approved mak (Crompton, Havells, Greevs or equivalent) incl. all fitting complete

Supply, installation of 63 Amp Change over Switch of Standard Make (Legrand, Havells or Eq make).

Provision for waterproofing compound for bathroom/WC

shiv naresh sports pvt. ltd.