PROVN OF SHED FOR INDOOR TRAINING AT NTS TEYELERABAD AND SPECIAL REPAIR OF OLD DRAINAGE AND PROVN OF CEMENTED SLABS AT MAROCS AND OTHER REVENUE WORKS UNDER GE MINNIEBAY PORT BLAIR

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundations, shafts, wells, cesspits manhole, pier holes etc n.exc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed by Engineer-in-Charge.

M&L Plain Cement Concrete Type C2 1:3:6 Nominal mix (using 40 mm graded stone aggregate) in foundations, filling and mass concrete including formwork complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete including formwork complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in Column, Pillars, piers, posts and struts etc including formwork complete all as specified and directed by Engineer-in-Charge.

S&F for Mild steel CRS Fe-550D grade TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified and directed by Engineer-in-Charge.

S&F for Mild steel Rolled section as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe.410-W.Gde-E-250 quality-A complete all as specified and directed by Engineer-in-Charge.

M&L For Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge. Note: Brackets over 10 kg each shall be measured and paid under 'Structural Steel' item.

S&F Mild steel plates (Plain or chequered) channels, square cut or notched (Ordinary and counter sunk) forming holes, without any attacheemnts Fe-410-W Gde - E - 250 quality - A complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel rag or lewis bolts, dia of necks is 12mm screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa trapezoidal profile as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, ridges, hips, valley gutter, drip, and straight flashing fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F for Aluminium flat, wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc. and similar work complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Surfaces excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Hard/Dense soil complete all as specified and directed by Engineer-in-Charge.

M&L for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L 100 mm thick Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregates as in sub base of flooring/hard standing including formwork laid in panels, including provision of expansion joints complete all as specified and directed by Engineer-in-Charge.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment all as specified and directed

M&L for providing Plain Cement Concrete type B-1 Nominal mix, 1:2:4 (using 20mm graded aggregate) as in coping, benching and similar works slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and directed by Engineer-in-Charge.

Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

S&F Precast cement concrete block for kerbs stone with solid block exc 10cm in width type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM 1:6 of any shape and size as approved by Garrison Engineer, including necessary excavation and earth work including returning filling in the earth and removal of surplus soil from site if any, kerb stone shall be fixed in true line and level or in curves for edging of road side path including embedding PCC pre cast block in ground to any depth as required and tampering soil around PCC blocks complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new or previously untreated concrete surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm thick Cement concrete type B 1, 1:2:4 (using 20 mm graded stone aggregate) in base of flooring/ hard standing.even & smooth without using extra cement including formwork, provision of expansion joint etc complete all as specified and directed by Engineer-in-Charge.

Demolition of Precast Concrete work block masonary built in Cement Mortar including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for external rendering 5mm thick in cement mortar 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in cement mortar 1:6 over block masonry or concrete surfaces finished even and fair complete all as specified and directed by Engr-in-Charge. Note : Water Proofing Compound shall be measured and paid separately as 'Supply only'

Demolition of RCC work of any description and any position complete all as specified and directed by Engineer-in-Charge.

M&L for precast Reinforced Cement Concrete 1:2:4 Design mix type B-1 using 20mm graded stone aggregate as in cover slab and like except set in cement mortor 1:4 complete including necessary form work complete all as specified and directed by Engineer-in-Charge. Note : Necessary reinforcement shall be measured and paid separately under relevant item as "Supply only"

Supply only mild steel CRS grade TMT bars 6-8mm dia bar cut to length, bent to shape required including cranking, bending spirally for hoping for fencing posts and binding with mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply only CRS Fe-550D grade Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for handles etc and hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed by Engineer-in-Charge.

M&L for Plain Cement Concrete Type B2 1:2:4 Nominal mix using 40 mm graded aggregate in surface channels and drains including necessary formwork complete all as specified and directed by Engineer-in-Charge.

M & L for taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as conduits, switches, ceiling roses, pendants, regulators sockets etc, removing materials and making good of the disturbed surfaces of walls, floors, etc all as specified and directed by Engineer-in-Charge.

M & L point wiring with 2 runs of 1.5 Sq.mm (nominal area) PVC unsheathed multi strandard FRLSH copper conductor pvc insulated 1100 volt single core cable drawn through concealed/surface mounted & including rigid steel conduit medium grade ISI marked minimum 25mm size including its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire of PVC unsheathed multi strandard FRLSH copper conductor pvc insulated 1100 volt single core and connecting to common earth dolly with 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches,switch socket combinations fan regulators etc., as required with 3 mm CRCA sheet Metal enclosure box as per required size complete all as directed and specified by Engineer-in-Charge.

One light /fan point controlled by 5/6 one way switch complete all as directed and specified by Engineer-in-Charge.

All as per item No 34 here in before but with 2 runs of 2.5 Sqmm single core PVC multi stranded unsheathed FRLSH copper conductor for one three pin socket 15/16 Amps on independant board including continuous earth wire PVC insulated 2.5 Sqmm single core PVC multi stranded unsheathed FRLSH copper conductor to common earth dolly complete all as directed and specified by Engineer-in-Charge.

All as per item No 34 here in before but with 2 runs of 4 Sqmm single core PVC multi stranded unsheathed FRLSH copper conductor for one three pin socket 15/16 Amps on independant board including continuous earth wire of 4sqmm single core PVC multi stranded unsheathed FRLSH copper conductor to common earth dolly complete all as directed and specified by Engineer-in-Charge.

M&L for Sub main wiring complete with 2 x 6 sqmm, single core, multi stranded copper conductor FRLSH PVC insulated and sheathed cable 1100 volts grade, drawn in 25mm stove enamelled steel conduit on surface/concealed (as required) along walls roofs etc including 6 sqmmm size pvc insulated unsheathed FRLSH copper earth continuity conductor to common earth and connecting to earth dolly complete all as directed and specified by Engineer-in-Charge. Note (i) All three wire/cable (phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run/four runs of cable and one run/two runs of earth conductor and steel Conduit shall be measured as one unit length and shall be paid accordingly.

S&F flameproof LED tube light 2x20W flame proof type FLP-WP, CMRI certified recommended for gas/vapour group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixture driver, holders, connectors etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable drawn through steel enamelled flexible conduit with suitable size complete all as directed and specified by Engineer-in-Charge. Make : Sudhir cat Part No. FF-1272

Supply & Fix flame proof ceiling fan , 1200 mm Sweep 240 volt, Single Phase. CMRI certified recommended for gas/vapour group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing, jerk free oscillation & smooth running comprising of high performance high speed motor for higher air delivery including connecting up to the ceiling rose(flame proof) including all accessories, metallic conduit complete all as directed and specified by Engineer-in-Charge. Make : Sudhir Cat Part No. CF/2C/193

Supply & Fix flame proof die cast aluminium alloy rotary regulator 240 volt. CMRI certified recommended for gas/vapour group of IIA & IIB, Zone 1 & 2 and IP 65 protection complete all as directed and specified by Engineer-in-Charge. Make : Sudhir Cat Part No. R1/OA/ 1010

S & F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V CMRI certified recommended for gas/vapour group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing, complete all as directed and specified by Engineer-in-Charge. Make : Sudhir Cat Part No. R1/OA/1010

S & F flame proof switch socket & plug combined in LM6 cable termination box in LM6, 32A, 250V, 2P+earth CMRI certified recommended for gas/vapour group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing, complete all as directed and specified by Engineer-in-Charge. Make : Sudhir Cat Part No. R1/OA/2021

S&F Flameproof CMRI certified recommended for gas/vapour group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing,junciton box 4 way complete all as directed and specified by Engineer-in-Charge. Make : Sudhir Cat Part No. JB/104

S&F metal ceiling rose, surface Mild Steel/Cast Aluminium 65 mm x 30 mm, 3 terminals complete all as directed and specified by Engineer-in-Charge.

S&F Flame proof die cast aluminum alloy distribution box SPN 8 Way with category of protection double door type IP-42 factory made with tinned copper upto 63 Amps rated bus bar suitable for MCBs and earth link connector, fixedcomplete all as directed and specified by Engineer-in-Charge. Make : Sudhir Cat Part No. MCDB/186 & RCP/215 Note : SPN distribution board shall be fixed in the wall such that front cover shall be seen flush with the wall surface.

Supply and fix MCB four Pole (Incomer) 63 Amps, 415 volts, 10 KA 'C' Curve complete all as directed and specified by Engineer-in-Charge.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and current carrying capacity upto 25 Amps complete with connection testing and commissioning complete all as directed and specified by Engineer-in-Charge.

M&L for earthing complete with copper earth plate electrode 600 x 600 x 3 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL) with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using copper earth strip 20x3 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection and 40mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6), type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I complete all as specified and as directed by Engineer-in-Charge. Note: (i) Cost of copper earth strip and GI protection pipe upto 7.5m length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning & filling, PCC chamber pit, RCC cover & test point.(iii) All accessories required for Copper plate electrode required, as specified and as directed.(iv) If the desired earth resistance is not achieved during testing as per IS , the complete earthing shall be replaced / repaired by the contractor at his own cost and no extra claim shall be admissible. (v) Earth test report shall be submitted to Accepting Officer for the payment of RAR / FB

Supply, install testing and commissioning of flame proof Zone-1 & 2 Gas group IIA,IIB, IIC as per IS/IEC 60079-1:2014 air cooled split unit air conditioner (required shade of colour) with remote control certified by CIMFR Tested electric driven, single phase of capacity 2.0 TR 230v AC with FLP WP MS body enclosure for thermostat,motor of capaicty 920 RPM single phase 0.25 HP and control panel,Compressor with terminal unit ( with eco friendly gas),installed at specified location with necessary copper tubes brazing, drain pipe, MS bracket set of two etc complete all as directed and specified by Engineer-in-Charge. Make : FLP WP Sudhir Cat part No SAC/211

Kathir Marketing Services

A.G.Construction

bansal construction

KRISHNA TRADING COMPANY

M/s Pooja Enterprises

Usha Builders

ISLAND SALES ENTERPRISES