Providing, installation, testing and commissioning of submersible pumpset 15,000 GPH x 150 M head along with allied works at Tube well Kabir Basti under District Capex

Amount

Providing, installation, testing and commissioning of submersible pumpset 15,000 GPH x 150 M head along with allied works at Tube well Kabir Basti. The job involves providing of new submersible pump set of 15,000 GPH x 150 M head of any reputed make and shifting to workshop in mechanical transport and unloading there. The job involves fabrication and fitting of one no. U-shaped tie rod / clamp of approximate 3.0 m span out of flat iron to tie submersible pump set with the help of heavy duty bolts and nuts welded at both ends of the clamp. The job also includes fabrication of one no. graded reducer/ expander nipple for NRV of required size out of MS plate threaded at one end and flanged at the other end. Fitting of reducer/ expander with MS column pipe at one end with flanged joint and with the discharge outlet of submersible pump at other end. The job includes coupling of the pump with motor, fitting the tie rod / U-clamp and testing the coupled unit in the testing pit. Then loading the pump set in mechanical transport and carrying the same at Tube well Kabir Basti. The job involves extraction of existing submersible pump set & lowering the new submersible pump set 15000 GPH x 150 mtrs. head by way hoisting of 5 ton capacity chain pulley block on the girder. The job also involves making proper water proof joints of submersible cable and motor leads with the help of patch roll, copper connectors and insulating material and thimbling at starter end. Lowering the pump set through MS flanged column pipes. The job includes tightening of each nuts and bolts of the flanged joint to ensure leak proof joint. Job also includes providing / fitting and laying of submersible cable, ISI marked, DMT of 16 Sq mm and length 10mtrs. The cable is to be fitted in two equal lengths from outgoing terminals of LT Control Panel to the submersible motor along with other allied electromechanical works. The cable is to be fitted in two equal lengths from outgoing terminals of LT Control Panel to the submersible motor along with other allied electromechanical works. . The cable is to be fitted in two equal lengths from outgoing terminals of LT Control Panel to the submersible motor along with other allied electromechanical works. The job includes providing and fitting of proper sized thimbles and making of leak proof connections on motor side using patch roll and rubber tapes. The job includes cost of material and labour charges. The job includes the cost of all types of material such as rubber sheet joints, nuts and bolts and labour charges for carriage of pump set, reducer expander, clamps to the work site and lowering of column pipes one by one, including the submersible pump set, taxes/ levies etc.

Rishabh Electricals and Mechanical Works

JAGDEMBAY MECH ENGG WORKS