The work of saturation (Straightening) of 11 KV Luktara, Jari, Paparenda, Kanwara Feeders under EUDD, Banda (Business Plan 2024-25)

The work of erection & repairing of 11 KV Lines and replacement of damaged electrical parts due to straightening of damaged/jarjar OH lines from Chilla Road Power House to Pathari, Gureh, Luktara, Darda/Chakchatghan of 11 KV Luktara, Jari, Paprenda, Kanwara Feeders UNDER BUSINESS PLAN YEAR 2024-25 under EUDD, BANDA, including carriage of all required material from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material/TFs from site to store centre, if any. All works like erection, fixing, installation, laying & grouting etc. shall be done by firm as per direction of Engineer incharge/RESSPO manual. During the erection of lines/poles has to be done including cartage. Details of the work as given below :-

SUPPLY OF MATERIAL -

Cross Arm Holding Clamp with Nut-Bolts for PCC 8.5 M Long

11 KV F-Clamp wih Nut-Bolts for PCC Poles 8.5 M Long

11 KV F-Clamp wih Nut-Bolts for STP Poles 13 M Long

MS Top Channel 100x50x2240 mm

Clamp with Nut-Bolts for Channel

MS Angle Iron 65x65x6 mm, 2700 mm Long Bracing with 4 Clamps & Nut-Bolts.

MS T-Off Channel

Danger Board with clamp & Nut/Bolt

Barbed Wire

Nut, Bolt & Washer of suitable sizes

ERECTION WORK -

Erection & fixing of ST Pole 13.0 Mtr. Long as single/double pole structure with HT/LT fittings.

Erection & fixing of PCC Pole 8.5 Mtr. Long as single/double pole structure with HT/LT fittings.

Erection & fixing of 11 KV V Type Cross Arm

Erection & fixing of Cross Arm Holding Clamp with Nut-Bolts for PCC 8.5 M Long

Erection & fixing of 11 KV F-Clamp wih Nut-Bolts for PCC Poles 8.5 M Long

Erection & fixing of 11 KV V Type Cross Arm 100x50x6 mm.

Erection & fixing of 11 KV F-Clamp wih Nut-Bolts for STP Poles 13 M Long

Erection & fixing of MS Top Channel 100x50x2240 mm

Erection & fixing of Clamp with Nut-Bolts for Channel

Erection & fixing of MS Angle Iron 65x65x6 mm, 2700 mm Long Bracing with 4 Clamps & Nut-Bolts.

Erection & fixing of MS T-Off Channel

Erection & fixing of 11 KV Pin Insulator

Erection & fixing of 11 KV Pin with nut

Erection & fixing of Disc Insulator

Erection & fixing of Disc fitting T&C 45 KN

Laying, sagging, stringing, binding and jumpering etc. of ACSR DOG Conductor on the erected pole as per direction of supervising engineer/RESSPO manual.

Laying, sagging, stringing, binding and jumpering etc. of ACSR Weasel Conductor on the erected pole as per direction of supervising engineer/RESSPO manual.

Erection & fixing of Danger Board with clamp & Nut/Bolt

Erection & fixing of Barbed Wire

Erection & fixing of GI Wire 8 SWG for guarding

Erection & fixing of Stay Set Complete

EARTHING OF POLE BY EARTHING ROD

Concreting/Grouting of erected 8.5/11/13 Mtr. long PCC/STP Poles with muffing as per direction of Engineer incharge/RESSPO manual. The support shall be grouted with cement, sand and brick ballast /stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement. (arrangement of grouting material by firm).

Straightening of tilted poles as 8.5/11/13 Mtr. Long PCC/ST Pole at various places.

Re-sagging of loose conductor of 11 KV HT/LT lines at various places.

Dismentalling of line material/poles and deposit to central store.

JMC Enterprises